···
Log in / Register

How to Open the Front Hood of a Great Wall Haval H6?

4 Answers
Nathaniel
07/29/25 12:10pm
The method to open the front hood of a Great Wall Haval H6 is: 1. Locate the front hood release lever under the left side of the dashboard; 2. Pull the release lever upwards to open the hood. Taking the 2021 Great Wall Haval H6 as an example, its body dimensions are: length 4615mm, width 1860mm, height 1720mm, wheelbase 2680mm, minimum ground clearance 182mm, and curb weight 1675kg. The 2021 Great Wall Haval H6 features a MacPherson strut front suspension and a double-wishbone independent rear suspension. It is equipped with a 1.5T turbocharged engine, delivering a maximum horsepower of 150PS, maximum torque of 210Nm, and maximum power of 110kW, paired with a 6-speed manual transmission.
Was this review help?
16
0
Share
StAlivia
08/13/25 10:22pm
When I first bought my Haval H6, I often forgot how to open the front hood, but now I’ve got the hang of it. Usually, I sit in the driver’s seat, bend down near the left foot pedal under the steering wheel, and feel for a small lever. A gentle pull unlocks the engine hood. Then, I have to get out of the car, walk to the front, and reach behind the grille just below the Haval logo to find a small latch. Flipping it open allows me to lift the entire front hood. Don’t forget to secure it with the support rod afterward to avoid it slamming down and hurting your hand. The whole process takes just a minute or two, and you’ll get used to it after a few tries. I think Haval’s design is quite user-friendly, unlike older cars that were more complicated. I use it often when washing the car or checking the oil—simple and practical, saving me trips to the repair shop. If it still won’t open, chances are the latch is stuck or not fully unlocked; just give it a slight shake and try again.
Was this review help?
15
1
Share
Expand All
DiKinsley
10/09/25 2:09am
I often encounter car owners saying they can't open the hood, especially with popular models like the Haval H6. Remember two things: first, don't look in the wrong place—the release handle is under the steering wheel on the driver's side footwell. Pull it until you hear a click, which means it's unlocked. Then, there's a hidden latch inside the front grille; feel for it and flip it to open. I recommend learning this during routine maintenance so you can self-rescue if the battery dies. Be gentle when operating to avoid damaging plastic parts. Over time, the cable might loosen, so check if the screws are tight. Regular checks like inspecting engine oil or the air filter can serve as practice—developing this habit ensures safety.
Was this review help?
18
3
Share
Expand All
MacAlan
11/22/25 3:24am
When I first started driving, I loved tinkering with the Haval H6's hood. Sitting in the driver's seat, I'd bend down to find the release lever near the steering wheel, pull it, then go to the front to fiddle with the small latch under the grille. After opening it, I'd make sure the support rod was securely in place. So simple! It made adding accessories or checking the coolant easy. At first, I often forgot the steps, but after practicing a few times, I got the hang of it.
Was this review help?
18
5
Share
Expand All
More Forum Discussions

What is the fuel consumption of the Fengjun 5 diesel version?

The diesel version of the model has a fuel consumption of 8.2 liters per 100 kilometers. About the Fengjun 5's engine: The Fengjun 5 is a pickup truck under Great Wall, equipped with three engines: a 2.0-liter turbocharged diesel engine, a 2.2-liter naturally aspirated gasoline engine, and a 2.4-liter naturally aspirated gasoline engine. (1) The 2.0-liter turbocharged diesel engine of the Fengjun 5 delivers 102 horsepower and a maximum torque of 225 Nm, with the maximum torque available between 1200 to 2800 rpm and the maximum power at 4000 rpm. This engine features direct injection technology and uses an aluminum cylinder head with a cast iron cylinder block. (2) The 2.2-liter naturally aspirated gasoline engine produces 101 horsepower and a maximum torque of 184 Nm, with the maximum torque available between 2400 to 2800 rpm and the maximum power at 4600 rpm. This engine is equipped with multi-point fuel injection technology and uses an aluminum cylinder head with a cast iron cylinder block. (3) The 2.4-liter naturally aspirated engine delivers 122 horsepower and a maximum torque of 200 Nm, with the maximum torque available between 2500 to 3000 rpm and the maximum power at 5250 rpm. This engine is equipped with multi-point fuel injection technology and uses an aluminum cylinder head with a cast iron cylinder block.
4
0
Share

What are the reasons why the GL8 won't start?

The reasons why the GL8 won't start are as follows: 1. Battery depletion: Battery depletion is one of the most common reasons why a car cannot start. A vehicle unable to start due to battery depletion usually manifests as the starter not working or the rotation speed being significantly insufficient when attempting to start. In such cases, please call the service station for assistance, jump-start the car, or temporarily start it, after which you must take the car to the service station to recharge the battery. 2. Fuel flow obstruction: This generally manifests as no oil pressure in the engine fuel supply pipe. This situation often occurs on particularly cold mornings and is caused by long-term dirt accumulation in the fuel line. When the temperature is extremely low, water and debris mix, blocking the fuel line and preventing the car from starting. In this case, placing the car in a warm environment for a while will allow it to start, or the fuel line can be cleaned to completely resolve the issue. 3. Poor ignition system performance: On particularly cold days, due to low intake air temperature, fuel does not atomize well in the cylinder. If combined with insufficient ignition energy, this can result in cylinder flooding, where excessive fuel accumulates in the cylinder, exceeding the ignition limit concentration and preventing the car from starting. In this situation, the spark plugs can be unscrewed to clean the oil stains between the electrodes, and after reinstalling, the car can start. A thorough solution is to check the ignition system and eliminate the causes of low ignition energy, such as spark plug electrode gaps, ignition coil energy, and the condition of high-voltage wires.
14
4
Share

What is the best engine oil for the Langdong car?

The suitable engine oil model for the Langdong car is 5W30. The functions of engine oil are as follows: 1. During the continuous movement of the car's engine, the oil plays a role in reducing wear on components by providing timely lubrication, ensuring the normal operation of the engine. Therefore, car owners need to regularly check whether the engine oil has expired or is insufficient and replenish it in time. 2. Engine oil with superior cleaning and protective performance can more effectively maintain and protect the car's engine. The characteristics of the engine oil for the Hyundai Langdong car are introduced as follows: 1. Small volume. 2. Light weight. 3. Compact structure. 4. High output power.
1
3
Share

Where is the license plate Chuan K from?

Chuan K is the license plate for Neijiang City. Relevant information about license plate numbers is as follows: 1. The first position on the license plate is a Chinese character, representing the abbreviation of the administrative region of each province, municipality, or autonomous region in China. 2. The second position is an English letter, representing the letter code for each prefecture-level city, district, autonomous prefecture, or league. 3. The five-digit serial number consists of Arabic numerals or a combination of Arabic numerals and English letters. There are 10 Arabic numerals from 0 to 9 and 24 English letters from A to Z, with the letters I and O excluded from the five-digit license plate.
16
5
Share

Where are the vehicle ICCID and SN located?

To find the vehicle ICCID and SN, you need to drive to a 4S dealership for inquiry. Relevant information is as follows: 1. The vehicle ICCID is the Integrated Circuit Card Identification Number, consisting of 20 digits in the format: XXXXXX-OMFSS-YYGXXXXXX. The ICCID generates a unique identification code during user registration based on the computer software and hardware information where the user's software is installed. 2. The SN code is an abbreviation for Serial-Number, sometimes referred to as SerialNo, which stands for product serial number. The product serial number is a concept introduced to verify the 'legitimate identity of the product,' ensuring users' rights to genuine products and legal services. A set of genuine products corresponds to only one product serial number, primarily to prevent software piracy; users must know the serial number to use the software.
8
3
Share

Where is the fuel tank cap switch of Wuling Capa?

The fuel tank cap switch of Wuling Capa is located below the driver's seat on the left side, within reach of the left hand. There are usually two toggle buttons, one for opening the trunk and the other for opening the fuel tank cap. The fuel tank cap switch has a fuel pump icon. Methods to open the car fuel tank cap: 1. In-car switch type: Nowadays, the more common method is the in-car switch button, which is more convenient compared to the mechanical key method. 2. Mechanical key method: The mechanical key method is more complicated. This method is usually found in more rugged SUVs, such as the JEEP Wrangler, Haval H5, etc. 3. Direct press type: The direct press type fuel tank cap opening method is the most convenient, requiring no operation from the car owner, and the fuel attendant can directly refuel.
17
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.