How to Open the Front Hood of a Golf?

2 Answers
JacksonFitz
07/25/25 9:22am
The method to open the front hood of a Golf is: The hood release lever is located on the lower panel on the driver's side, where there is a pull handle. Simply pull it gently, and the hood will make a sound. Then, proceed to the front of the hood to locate a protruding switch to fully open the hood. After opening the hood, use the support rod to secure it in place, ensuring it is stable before letting go. Taking the Golf 7 as an example, it is a compact car with body dimensions of 4296mm in length, 1788mm in width, and 1471mm in height, with a wheelbase of 2636mm. The Golf 7 features front-wheel drive, with a front suspension type of MacPherson strut independent suspension and a rear suspension type of torsion beam non-independent suspension.
Was this review help?
9
4
Share
Tabitha
08/11/25 7:16pm
Opening the hood of a Golf is actually quite simple. Let me share my experience: First, you need to sit in the driver's seat and look for the hood release lever near your left foot under the steering wheel. It's usually a black handle—just give it a gentle pull, and you'll hear the hood pop open. Then, step out and walk to the front of the car. Slide your fingers into the gap between the hood and the front bumper, where you'll feel a small switch or lever—that's the safety latch. Push it to one side or flip it to fully unlock the hood. Finally, lift the hood and secure it with the support rod. Remember to ensure the car is parked and turned off before doing this to avoid accidents. Personally, I always take the opportunity to check the coolant and oil levels after opening the hood to prevent other issues from building up. Developing this habit can extend your car's lifespan and reduce repair costs.
Was this review help?
15
3
Share
Expand All
More Forum Discussions

How many seconds does the Tiggo 8 take to accelerate from 0 to 100 km/h?

According to the officially released data, the Tiggo 8 manual transmission model takes 10.5 seconds to accelerate from 0 to 100 km/h, while the automatic transmission model takes 11.1 seconds. The factors affecting a vehicle's 0-100 km/h acceleration time are as follows: Torque: Torque, in simple terms, indicates how much force is available. The greater the torque, the more force is available to propel the vehicle, naturally resulting in faster acceleration. The Tiggo 8 has a maximum power output of 187 kW and a maximum torque of 390 N·m. The Tiggo 7 has a maximum power output of 156 kW and a maximum torque of 230 N·m. Transmission efficiency: The transmission serves as the medium for power transfer, inevitably involving power loss. The higher the transmission efficiency, the better the acceleration performance. Generally, the ranking of transmission efficiency is as follows: manual transmission > dry dual-clutch transmission > wet dual-clutch transmission > AT transmission > CVT transmission. The new Tiggo 8 model from Chery Automobile uses a 6-speed DCT transmission. The Tiggo 7 from Chery Automobile uses a dual-clutch transmission. Power-to-weight ratio: The relationship between horsepower and vehicle weight is referred to as the power-to-weight ratio (unit: Hp/T). The higher the power-to-weight ratio, the faster the acceleration. The Tiggo 7 has a power-to-weight ratio of 106.48 Hp/T and accelerates from 0 to 100 km/h in 8.8 seconds, while the Tiggo 8 has a power-to-weight ratio of 103 Hp/T and accelerates from 0 to 100 km/h in 10.5 seconds.
17
2
Share

How many liters of engine oil are needed for an Edge oil change?

How many liters of engine oil are needed for an Edge oil change depends on the engine type: 1. The 2.0L turbocharged engine requires approximately 5.5L of engine oil; 2. The 2.7L turbocharged engine requires approximately 6.5L of engine oil. Taking the 2021 Edge Two-Wheel Drive Elite model as an example, it is equipped with a 2.0L turbocharged engine, paired with an 8-speed automatic transmission, delivering a maximum horsepower of 245ps and a maximum power of 180kw. The body dimensions of the 2021 Edge Two-Wheel Drive Elite model are: length 4878mm, width 1925mm, height 1734mm, with a wheelbase of 2850mm.
4
4
Share

How many cylinders does the GM6 engine have?

GM6 is equipped with a four-cylinder engine. A four-cylinder engine, also known as a four-cylinder power unit, is a machine capable of converting one form of energy into another more useful form. Its structure consists of components such as the cylinder block, crankcase, cylinder head, and cylinder gasket. The GM6 is an MPV with dimensions of 4780mm in length, 1837mm in width, and 1730mm in height, a wheelbase of 2810mm, and a fuel tank capacity of 52 liters. In terms of power, the GM6 is powered by a 1.5T turbocharged engine, delivering a maximum horsepower of 169 PS, a maximum power output of 124 kW, and a peak torque of 265 Nm, paired with a 6-speed manual transmission.
14
3
Share

What does Mercedes-Benz E300L ECO mean?

The ECO in Mercedes-Benz E300L refers to the car's economical driving mode function. ECO is an English abbreviation formed by the combination of Ecology (environmental protection), Conservation (energy saving), and Optimization (power). The Eco mode is further divided into active eco driving mode and non-active eco driving mode. When the eco indicator light on the dashboard illuminates, it indicates that the car's economical mode has been activated. Eco mode is categorized into active and non-active types. The difference lies in the fact that the active type has its own dedicated button, allowing the driver to choose whether to activate it. When the driver presses the eco mode switch, the dashboard indicator light immediately illuminates, and the vehicle automatically begins adjusting settings such as throttle opening, transmission shift logic, and air conditioning output power. The non-active eco mode does not have a dedicated button. When the dashboard eco indicator light illuminates, it merely serves as a reminder function. The eco system automatically evaluates your driving behavior. If your current driving operation achieves the optimal fuel supply, the dashboard will simultaneously display the eco indicator light. Most cars adopt the active eco driving mode, meaning they have their own switch button. Therefore, during daily driving, we can activate the eco mode. However, it is unnecessary to enable eco mode when driving at speeds exceeding 120 km/h, during idle parking, in N/P gear, or in manual mode, especially when climbing hills. Doing so would not reflect the fuel-saving characteristics of eco mode and could instead impact the vehicle's power performance. Additionally, the eco mode typically becomes ineffective under the following circumstances: When the vehicle speed exceeds 120 kilometers per hour, the car prioritizes speed, causing the eco mode to automatically deactivate. During idle parking or when in N/P gear or manual mode, the eco mode may also become ineffective. When high torque output is required, such as when climbing a hill, the engine control unit prioritizes ensuring sufficient power to drive the vehicle, and the eco mode will not operate under these conditions either.
7
4
Share

What does the 10th digit 'k' in the VIN represent?

The 10th digit 'k' in the VIN indicates that the vehicle's production year is 2019. There are 30 characters used to represent vehicle production years, with each character corresponding to a different year, cycling every 30 years. The VIN consists of seventeen letters or numbers and is a unique set of codes assigned to a vehicle, which can identify the manufacturer, engine, chassis number, and other performance data. The meanings of the characters in the VIN are as follows: 1. Digits 1 to 3 represent the manufacturer, brand, and type; 2. Digits 4 to 8 indicate the vehicle category, series, body type, and engine type; 3. The 9th digit is the vehicle check digit; 4. The 10th digit represents the production year; 5. The 11th digit indicates the assembly plant; 6. Digits 12 to 17 represent the vehicle's production serial number.
2
5
Share

What does the mute button in a car mean in Chinese?

The mute button in a car refers to the silent mode in Chinese, which is used to control the mute mode of multimedia. When answering calls or playing music, pressing the mute button can silence the sound. The buttons in the car are divided into: 1. Fuel tank opening button: remotely opens the fuel tank cover in the car; 2. ESP switch button: used to turn on or off the ESP function of the vehicle; 3. Reverse radar button: allows the owner to turn on or off the reverse radar system in the car as needed; 4. Central lock button: is the control button for the central door lock of the vehicle; 5. Headlight cleaning button: controls the automatic cleaning function of the headlights; 6. Rear sunshade button: controls the opening and closing of the electric rear sunshade in the car.
7
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.