How to Open the Front Hood of a Geely Car?

1 Answers
Willow
07/29/25 8:56pm
The method to open the front hood of a Geely car is: 1. Pull the front hood release lever located at the lower left side of the driver's instrument panel; 2. Push the front hood safety latch handle, located at the left center of the radiator grille, to the right to disengage it; 3. Lift the front hood and support it with the prop rod. Models under the Geely brand include: Geely Binyue, Geely Boyue, Geely Emgrand GL, Geely Emgrand GS, Geely Haoyue, and others. Taking the 2020 Geely Binyue as an example, it is a compact SUV with the following dimensions: length 4330mm, width 1800mm, height 1609mm, wheelbase 2600mm, fuel tank capacity 45 liters, and curb weight 1310kg.
Was this review help?
1
0
Share
More Forum Discussions

How to Turn Off the Maintenance Reminder for the X-Trail?

The method to turn off the maintenance reminder for the X-Trail is: 1. Press the toggle button and the confirm button on the left side of the steering wheel to enter the maintenance interface; 2. Click on the maintenance option, then select the engine oil and filter option; 3. Choose the reset option below the number, adjust the number on the right to 5000 kilometers, and click confirm. Taking the 2021 X-Trail as an example, it is a compact SUV with body dimensions of: length 4675mm, width 1820mm, height 1722mm, a wheelbase of 2706mm, a minimum ground clearance of 208mm, and a body weight of 1489kg.
14
1
Share

Which country is Nissan from?

Nissan is a Japanese brand. The models under Nissan include Teana, Sylphy, X-Trail, Qashqai, Venucia, etc. Taking the 2021 Teana as an example, its body dimensions are: length 4901mm, width 1850mm, height 1450mm, wheelbase 2825mm, fuel tank capacity 61.3l, and curb weight 1456kg. The 2021 Teana has a MacPherson strut front suspension and a trapezoidal control arm multi-link independent rear suspension. It is equipped with a 2.0L naturally aspirated engine, with a maximum horsepower of 156ps, maximum power of 115kw, maximum torque of 197nm, and is paired with a CVT continuously variable transmission.
9
2
Share

What brand is the Lynk & Co 03?

Lynk & Co 03+ belongs to the Lynk & Co brand, which is a joint venture between Geely Auto Group and Volvo Car Group. Taking the 2021 Lynk & Co 03+ as an example, its body dimensions are: length 4677mm, width 1840mm, height 1461mm, with a wheelbase of 2730mm and a curb weight of 1615kg. The 2021 Lynk & Co 03+ features a MacPherson strut front suspension and a multi-link rear suspension. It is equipped with a 2.0L turbocharged engine, delivering a maximum horsepower of 254PS, a maximum power of 187kW, and a maximum torque of 350Nm, paired with an 8-speed automatic transmission.
6
4
Share

Where to Check the Tire Pressure Monitoring in the Lamando?

The tire pressure monitoring in the Lamando can be viewed on the dashboard. The Lamando's tire pressure monitoring system is passive, and it will alert on the dashboard when there is abnormal tire pressure. The functions of tire pressure monitoring: 1. Prevent accidents; 2. Extend the service life of tires; 3. Reduce wear and tear on vehicle components. Taking the 2021 Lamando as an example, its body dimensions are: length 4615mm, width 1826mm, height 1425mm, with a wheelbase of 2656mm. The 2021 Lamando has a MacPherson independent front suspension and a multi-link independent rear suspension. It is equipped with a 1.4T inline 4-cylinder turbocharged engine, with a maximum horsepower of 131ps, a maximum torque of 225Nm, and a maximum power of 96kW, paired with a 7-speed dual-clutch transmission.
12
0
Share

How often should the timing chain be replaced on the Magotan?

The timing chain on the Magotan should be replaced at 200,000 kilometers. The replacement method for the timing chain is as follows: 1. Remove the valve cover and then the timing chain housing; 2. Rotate the crankshaft to position the first cylinder at top dead center and secure the crankshaft with the fixing screw; 3. Rotate the intake and exhaust camshafts—there are grooves at the rear of the camshafts, align the grooves of both camshafts horizontally; 4. Remove the old chain and install the new one; 5. During installation, ensure there is no gap at the crankshaft position sensor to avoid triggering fault codes. Taking the 2020 Magotan as an example, it is a mid-size sedan with the following dimensions: length 4865mm, width 1832mm, height 1471mm, wheelbase 2871mm, and a curb weight of 1445kg.
10
0
Share

How to eliminate the circle slash on the dashboard?

The appearance of a circle slash on the dashboard may indicate that the car's handbrake is engaged. Lowering the handbrake will turn off the light. If this light is on without the handbrake being engaged, it could mean the brake fluid is insufficient and needs to be replenished promptly. Below is related information about dashboard symbols: 1. Exclamation mark inside a triangle: A. Overheating of the dry dual-clutch transmission clutch. B. Fuel cut-off system intervention or malfunction. C. Parking sensor issues. 2. Exclamation mark inside parentheses: Refers to the tire pressure monitoring indicator, indicating insufficient tire pressure.
12
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.