How to Open the Front Hood of a Bora?

1 Answers
LaBrody
07/30/25 1:30am
To open the front hood of a Bora, follow these steps: 1. Locate the hood release lever near the driver's left foot area and pull it backward. 2. Move to the front of the car, reach under the center of the hood, and push the latch to the right to release and open the hood. The Bora measures 4663 mm in length, 1815 mm in width, and 1462 mm in height, with a wheelbase of 2688 mm. It has a fuel tank capacity of 50 liters and a trunk capacity of 506 liters, with a curb weight of 1320 kg. This model is equipped with a 1.2L turbocharged engine, delivering a maximum horsepower of 116 PS and a maximum power output of 85 kW, paired with a 7-speed dual-clutch transmission.
Was this review help?
5
4
Share
More Forum Discussions

How to Use the Engine Start-Stop Function in the Excelle?

The usage method of the Excelle's engine start-stop system is as follows: The system is enabled by default after the engine starts. The switch is located next to the ignition switch or on the center console. Pressing the button can manually deactivate the automatic start-stop system. When the start-stop function is enabled, with the gear lever in D position and the brake pedal depressed, the system stops when the tachometer needle points to the AUTOSTOP position. The Excelle is a compact car under SAIC-GM, equipped with a 1.3T or 1.0T Ecotec dual-injection turbocharged engine. The Super Connected Edition model features Buick eConnect connectivity technology, a human-machine interface, and supports cloud-based connected applications and services.
20
0
Share

Can the Jetta steering tie rod assembly be replaced?

Jetta steering tie rod assembly can be replaced. The disassembly and installation steps are as follows: 1. Remove the dust cover of the car tie rod; 2. Remove the screw connecting the tie rod and the steering knuckle; 3. Remove the ball joint connecting the tie rod and the steering gear; 4. Install the new tie rod, compare it with the old one, and assemble it after confirming that the parts are the same; 5. Tighten the dust cover, you can apply glue to both ends of the dust cover and then secure it with zip ties; 6. After replacement, a four-wheel alignment must be performed to adjust the data within the normal range. Jetta is an automobile brand under FAW-Volkswagen Automotive Co., Ltd., with a length, width, and height of 4501mm, 1704mm, and 1469mm respectively, and a wheelbase of 2604mm.
19
2
Share

How to Reset the Tire Pressure Light on the Sagitar?

The method to reset the tire pressure light on the Sagitar is as follows: You can turn off the tire pressure indicator light by using the tire pressure reset button on the car's central console. This button is usually located near the gear shift lever. Press and hold the tire pressure monitoring switch for more than 3 seconds, and you will hear a corresponding prompt sound. At this point, the tire pressure warning light on the dashboard will turn off. The Sagitar is a model under FAW-Volkswagen, with body dimensions of 4544mm in length, 1760mm in width, and 1461mm in height, and a wheelbase of 2578mm. The car is equipped with LED high-performance composite taillights, halogen integrated headlights, a windshield with a sunshade area, green UV-protective and heat-insulating glass, a multifunctional electric sunroof, and exterior rearview mirrors with electric adjustment and heating functions.
9
2
Share

Why Do Aircraft Engines Use Kerosene?

Aircraft engines do not use gasoline or diesel because gasoline is a volatile substance with a low flash point and rapid combustion. Below is an introduction to why aircraft engines avoid gasoline and diesel: 1. Kerosene has a higher specific gravity, allowing it to store more heat and weight, and it is not as volatile as gasoline. Since aircraft have limited fuel-carrying capacity, using kerosene is more economical and durable. Additionally, kerosene is safer than gasoline and can be better atomized in turbine engines, ensuring more stable combustion. Considering these factors, aircraft use kerosene as fuel. 2. During high-speed flight, aircraft inevitably generate heat through friction with the air, which would cause gasoline to evaporate more quickly. A mid-flight fuel shortage would have severe consequences. Diesel, on the other hand, is too viscous. While it can be used in compression-ignition engine aircraft, it is not easily atomized and sprayed in the more common turbine engines, making combustion more difficult.
7
5
Share

Does Rainwater Affect Cars?

Rainwater can indeed affect cars. Prolonged exposure to rainwater can lead to aging of the car's paint and moisture-induced mold inside the vehicle. During thunderstorms, road surfaces often accumulate water, and after driving through these puddles, acidic rainwater can adhere to the chassis. The retention of acidic water on the chassis can cause rusting. Therefore, it is advisable to park cars in covered garages and wash them as soon as possible after exposure to rain. Hazards of Rainwater to Car Headlights: During rainy weather, water can easily enter the vehicle's headlights. Once inside, it can affect the headlights, such as altering the light beam and causing refraction. This not only compromises driving safety but can also lead to serious traffic accidents. Hazards of Rainwater to Car Engines: Driving through water can easily cause the engine to stall. Engines are particularly vulnerable to water damage, and some cars may experience water ingress issues, preventing the car from starting. If the engine stalls, it is crucial not to attempt restarting it immediately, as this can severely damage or even destroy the engine. Hazards of Rainwater to Car Tires: Rain can directly impact the tire's grip on the road, increasing the risk of skidding. Additionally, prolonged exposure to damp conditions can accelerate the development of cracks and rust on the tires.
18
2
Share

What Are the Consequences of Not Changing the Car's Air Conditioning Filter for a Long Time?

Not replacing the car's air conditioning filter for an extended period can lead to the accumulation of a large amount of dust and dirt on the filter plate, radiator, evaporator, and fin surfaces, causing airflow blockage. This results in reduced cooling and heating efficiency, increased power consumption and noise, and a shortened lifespan of the air conditioning system. More seriously, the odors inside the car can harm the health of the driver and passengers. Prolonged exposure to such an environment may cause dizziness, nausea, and even respiratory diseases. The function of the car's air conditioning filter: The car's air conditioning filter uses activated carbon composite filter cloth, which combines highly efficient adsorption material activated carbon with long-fiber non-woven fabric, featuring a compact structure. It effectively filters smoke odors, pollen, dust, harmful gases, and various odors. The filter also efficiently captures and adsorbs particulate impurities, achieving oil filtration and air purification. Replacement cycle for the car's air conditioning filter: For urban household vehicles, it is recommended to replace the filter every 10,000 to 20,000 kilometers or approximately once a year. If the driving environment is poor with more dust, the filter may get dirty more easily, and the replacement cycle should be shortened accordingly. Additionally, the frequency of air conditioning use varies by season, which may also affect the replacement cycle.
6
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.