How to Open the Front Engine Hood of the Lavida?

Should You Press the Brake When Shifting Gears?

Whether you need to press the brake when shifting gears in an automatic transmission depends on the situation. Scenarios where you should press the brake: When shifting between P (Park), R (Reverse), and D (Drive), it is advisable to press the brake. This is primarily for safety reasons. If the car is moving in D (Drive), you must press the brake and wait for the vehicle to come to a complete stop before shifting into R (Reverse). Otherwise, unexpected incidents may occur. When shifting from P (Park) to a forward gear, pressing the brake prevents the car from suddenly lurching forward, which could lead to loss of control. Most automatic transmissions have a shift-lock feature that requires you to press the brake when shifting from P (Park) to other gears. Forcing the shift without pressing the brake may damage the transmission. Scenarios where you don't need to press the brake: While driving, you don't need to press the brake when shifting between forward gears, such as D (Drive), S (Sport), and L (Low). Simply move the gear lever to shift. For automatic cars with manual mode, shifting up or down also doesn't require pressing the brake.

15

4

Share

How to Deal with Misfiring Cylinder Issues?

To address a misfiring cylinder issue, a thorough vehicle inspection is required. The specific steps are as follows: 1. First, inspect the misfiring cylinder. Use a flathead screwdriver to ground the spark plug terminal nuts one by one and observe the engine's operation. For a cylinder that was already misfiring, grounding it will not change its operation. If the grounded cylinder was functioning normally, the engine's power will noticeably decrease, and uneven operation will worsen. 2. Alternatively, you can determine the non-functioning cylinder by checking the temperature of the spark plugs—a colder spark plug indicates that the cylinder is not working. Once the non-functioning cylinder is identified, remove its high-voltage spark plug wire and hold it 3-4mm away from the spark plug. Turn on the ignition switch and observe the spark. If there is no spark, slightly pull the other end of the wire out of the distributor socket and check if the adjacent socket sparks to the wire. If it sparks to the wire, the wire is leaking electricity. If there is no spark, inspect the distributor cap's adjacent socket for leakage (you can remove the central high-voltage wire from the distributor cap, insert it into the adjacent socket of the cylinder, and turn the crankshaft to observe the contact gap when the cam lobe acts). If there is a spark when the cylinder's spark plug wire is removed and the engine speed evens out, it indicates excessive carbon buildup or minor leakage in the spark plug. If there is a spark but the engine speed does not change, the spark plug is severely leaking electricity, and it is recommended to visit an auto repair shop promptly for inspection and repair.

12

1

Share

Where is the fuel filter located in the BMW X1?

The fuel filter of the BMW X1 is located inside the body guard plate under the driver's seat, and its function is to filter impurities from the gasoline. Taking the 2020 BMW X1 as an example, it belongs to the compact SUV category, with body dimensions of: length 4565mm, width 1821mm, height 1620mm, wheelbase 2780mm, fuel tank capacity 61L, and luggage compartment capacity 505L. The 2020 BMW X1 is equipped with a 1.5T turbocharged engine, delivering a maximum horsepower of 140PS, maximum power of 103kW, maximum torque of 220Nm, paired with a 7-speed dual-clutch transmission.

19

1

Share

Is it useful to apply for ETC if I don't often use highways?

Applying for ETC is still useful even if you don't often use highways. Because ETC is free to apply, and after installation, your vehicle can enjoy a 5% discount when passing through toll stations. Benefits of installing ETC: Time-saving: Eliminates the hassle of waiting in queues; Green and eco-friendly: Promotes low-carbon travel, as vehicles can pass through toll stations without stopping, reducing noise and exhaust emissions, thereby decreasing pollution; Reduced wear and tear: Saves costs, decreases the frequency of vehicle starts and brakes, lowers wear and fuel consumption, and users can also enjoy a 5% discount on toll fees; Improved efficiency: The efficiency of passing through ETC lanes can theoretically increase by 2-3 times, making traditional ETC more updated, faster, and more high-tech. Compared to license plate payment, ETC technology is more mature and advantageous. ETC installation locations: For small vehicles like cars and minivans, the ETC card and OBU device are installed in the upper middle part of the front windshield. For large vehicles like trucks and buses, the installation location is in the middle-lower part. ETC installation requirements: The height should be no less than 1.2 meters and no higher than 2.5 meters; the installation angle N should be between 30º and 90º (the angle between the surface of the electronic tag and the horizontal plane).

8

5

Share

What are the methods to prevent car tire blowouts?

Methods to prevent car tire blowouts include: 1. Reduce tire pressure by 0.1 bar; 2. Avoid sudden acceleration and braking; 3. Ensure all four wheels are parked on the same level ground; 4. Fill tires and spare tires with nitrogen. Causes of car tire blowouts: 1. Excessive temperature; 2. Vehicle overload; 3. Speeding; 4. Rough roads; 5. Non-standard tire pressure; 6. Internal tire damage and excessive surface wear. Methods to prevent car tire blowouts: 1. Use radial tires; 2. Maintain standard tire pressure. A car tire blowout can cause the vehicle to lose control, making it difficult to maintain balance and leading to a rollover.

7

1

Share

Is the rear suspension of the Civic independent?

The rear suspension of the Civic is an independent suspension, specifically a multi-link independent suspension. The multi-link independent suspension enhances the wheel's grip, which in turn improves the vehicle's handling and ride comfort. The multi-link suspension is an improvement based on the double-wishbone suspension. Not only does the multi-link suspension ensure a certain level of comfort, but its multiple links also help keep the wheels as perpendicular to the ground as possible, reducing body roll and maintaining optimal tire contact with the road. The Civic is a model under Honda, and the domestically launched Honda Civic shares the same production platform as the Dongfeng Honda CR-V, with both vehicles using the same chassis. This provides the technical prerequisites for the domestic production of the Honda Civic.

2

1

Share

How to Open the Front Engine Hood of the Lavida?

Should You Press the Brake When Shifting Gears?

How to Deal with Misfiring Cylinder Issues?

Where is the fuel filter located in the BMW X1?

Is it useful to apply for ETC if I don't often use highways?

What are the methods to prevent car tire blowouts?

Is the rear suspension of the Civic independent?

Is transmission fluid maintenance based on mileage or years?

What tires are equipped on the Trumpchi GS8?

How to Pry Open a Car Door?

Is fingerprint scanning required for the Subject 1 exam?