How to Open the Engine Hood of the Magotan?

Can Window Scratches Be Repaired?

Window scratches can be repaired. Here is a detailed introduction to the methods for repairing window scratches: 1. Grinding Removal: Small scratches can be removed by grinding. However, grinding may cause some loss to the glass, which could affect visibility. 2. Using Repair Agents: Minor scratches can be repaired with glass scratch repair agents. For more severe scratches, it is recommended to visit a 4S shop for professional repair. The repair agent should be slowly applied along the crack in the glass. 3. Using Toothpaste to Remove Scratches: Toothpaste can be used to repair some fine scratches. Apply a small amount of toothpaste to the scratched area of the window glass, gently rub with a soft cloth, and rinse with water.

6

2

Share

What lights should be turned on when parking by the roadside?

When parking by the roadside, turn on the hazard warning lights. This function is mainly used to remind passing vehicles at night to avoid collisions. Here are the relevant details: Introduction to hazard warning lights: Press the button with a triangular pattern on the car's central console to turn on the hazard warning lights, and press it again to turn them off. The hazard light button is usually red and is prominently positioned on the central console. It features a white double-triangle border and is relatively large in size. Parking precautions: When parking by the roadside, observe whether there are other high-speed vehicles around, and promptly turn on the right turn signal before slowly pulling over to the right side.

16

5

Share

What Causes Engine Idle Vibration in Cars?

Engine idle vibration in cars can be caused by severe carbon deposits, aging engine mounts, ignition system failures, and other reasons. The specific causes are as follows: Severe Carbon Deposits: The main reason for severe carbon deposits in the engine is a dirty throttle body or excessive carbon buildup in the fuel injectors, which is also a common cause of engine vibration. Aging Engine Mounts: If the vibration during idle does not decrease when the car's air conditioning compressor is running, it is likely due to aging engine mounts, which need to be replaced promptly. Ignition System Failure: Ignition system failure occurs when spark plugs, high-voltage wires, or ignition coils degrade over time, leading to poor ignition performance and resulting in idle vibration.

10

5

Share

What causes a motorcycle to stall after a few ignition attempts?

The reasons for a motorcycle stalling after a few ignition attempts include insufficient fuel supply, thermal breakdown of electronic components, etc. It is best to conduct an actual inspection. The solutions are as follows: 1. First, close the choke to prevent air from the air filter from entering the carburetor, then disconnect the power and kick the starter a few times; 2. For the first electric start, do not use the throttle and see if it can start; 3. If it doesn't work, try a second start while slowly applying the throttle (not too fast) until you hear the engine start working, then you don't need to continue applying the throttle; 4. Try to control the throttle well to keep the engine running at idle speed.

9

1

Share

How many times a year should a car be inspected after 15 years?

After 15 years of use, a car needs to be inspected twice a year. Here are the specific regulations for vehicle annual inspections: 1. Passenger vehicles for commercial use: Inspected once a year within 5 years; after 5 years, inspected once every 6 months. 2. Trucks and large or medium-sized non-commercial passenger vehicles: Inspected once a year within 10 years; after 10 years, inspected once every 6 months. 3. Small and mini non-commercial passenger vehicles: Inspected once every 2 years within 6 years; after 6 years, inspected once a year; after 15 years, inspected once every 6 months.

10

3

Share

How long does a car need to run after a jump start?

If using a regular charging mode, it typically takes about 12 hours. If relying on the car's own alternator for charging, driving for 1 to 2 hours should suffice. Here are some precautions for jump-starting: (1) The rescue vehicle should turn off its power to prevent short circuits caused by incorrect connections and avoid equipment damage; (2) Use dedicated automotive jumper cables, not homemade ones; (3) When connecting the cables, follow the sequence of connecting the positive terminal first, then the negative terminal, ensuring the positive and negative terminals do not touch; (4) After connecting the jumper cables, promptly start the engine of the rescue vehicle to ensure it has sufficient power; (5) Once the rescued vehicle's engine starts successfully, disconnect the negative terminal first, then the positive terminal to prevent short circuits.

2

5

Share

How to Open the Engine Hood of the Magotan?

Can Window Scratches Be Repaired?

What lights should be turned on when parking by the roadside?

What Causes Engine Idle Vibration in Cars?

What causes a motorcycle to stall after a few ignition attempts?

How many times a year should a car be inspected after 15 years?

How long does a car need to run after a jump start?

Is it acceptable to be less than 30 cm from the edge line on a slope?

What are the reasons for delayed shifting in automatic transmissions?

How Long Does the First Maintenance Take?

What does 1.5t displacement mean?