How to Open the Engine Hood of the Buick Excelle?
2 Answers
The operation to open the engine hood of the Buick Excelle is as follows: 1. Locate the engine hood release lever below the left side of the steering wheel, pull it upward to release, and then return it to its original position. 2. There is a safety lock in the middle front of the hood; move it toward the driver's side and then lift the engine hood. When closing the engine hood: 1. First, lower the hood support stand, use your other hand to hold the hood, and slowly lower it. When the hood is about 50mm-60mm from closing, release it to allow it to fall freely. You will hear a 'clunk' sound indicating it is locked. 2. If the hood is not allowed to fall freely from this distance, it may not close properly. Of course, if released from too high, it might cause distress to car owners who care about their vehicles.
When I usually help friends with their cars and need to open the hood, I find the operation of the Buick Excelle quite straightforward. First, sit in the driver's seat, look down to find the small lever at the lower left corner of the steering wheel, and pull it to hear a click. Then, get out of the car and go to the front. There's a small switch or indentation slightly below the middle of the engine cover—just push it up or lift it to open the hood. The whole process takes about a few dozen seconds, but make sure the car is parked on level ground, turned off, and the handbrake is engaged to prevent accidental rolling. If the lever feels too tight to pull, it might be due to rust or dirt on the latch hook—a gentle tap or a bit of WD-40 spray can loosen it. After opening the hood, don't forget to properly support the rod to prevent it from snapping back and causing injury. Take the opportunity to check common areas like the oil dipstick and coolant reservoir—spotting leaks or stains early can save a lot on repair costs. In short, patience and taking it slow ensure safety.
