How to Open the Engine Hood of Roewe 550?

[VonCody]

To open the front engine hood of the SAIC Roewe 550, follow these steps: 1. Open the driver's side door. 2. Engage the handbrake to prevent the vehicle from rolling. 3. Pull the engine hood release lever located on the left side of the driver's leg area. 4. Lift the engine hood upwards. 5. Secure the hood with the support rod to ensure it is firmly held in place and to avoid any hazards. Below is an introduction to Roewe: 1. The name "Roewe (ROEWE)" is derived from the meaning "Innovative Honor, Prestige Worldwide." The brand name blends Eastern and Western cultures, being open yet reserved, elegant yet confident. The logo embodies a classic and noble temperament, reflecting a fusion of Eastern and Western elements that conveys self-assurance. It fully expresses SAIC's commitment to independent control and innovation, inheriting world-class technology to reshape China's international brand with determination and confidence. 2. "Roewe (ROEWE)" products are positioned in the mid-to-high-end segments of various market levels, targeting consumers who are knowledgeable, cultured, successful in their careers, innovative, proactive, and quality-conscious. The "Roewe (ROEWE)" brand aims to provide consumers with a unique, confident, and enriching brand experience. Meanwhile, SAIC strives to deliver products and services that embody "Quality, Technology, and Realization" through models like the Roewe 750, Roewe 550, Roewe 350, and future products.

[VonLorenzo]

Last time I helped my buddy open the hood of his Roewe 550, it took me a while to figure out the trick. First, you need to sit in the driver's seat and locate the hood release lever under the dashboard near your left leg. That small black handle is tucked away and only becomes obvious when you bend down to look. Pull it down firmly until you hear a 'click' sound. Don't rush to lift the hood yet - that only releases the first lock. Then walk to the front center of the car, slide your hand into the gap that's popped open, feel for a metal latch, push it to the left while lifting up, and the whole hood will open. Be careful with older cars - if the hydraulic struts can't hold it, prepare a support rod in advance. Last time his support rod failed and nearly smashed his hand.

[LawsonRose]

For beginners driving a Roewe 550, opening the front hood can be confusing. Here’s a lesson from my own experience. You don’t even need to remove the key—just pull the release lever near the driver’s left foot with some force, as the plastic handle can feel a bit stiff. The first time I pulled it, I thought it was open and rushed to the front of the car, only to find nothing had happened! Turns out, you still need to manually release the secondary latch at the front. The latch is hidden in the gap right above the car emblem. Slide your finger in from the middle to feel the cold metal piece, then push it all the way toward the driver’s side while lifting the hood. Remember to do both actions simultaneously, or the latch will snap back. If you notice oil stains on the car paint, check if the hydraulic struts are leaking.

[SanDallas]

Briefly describe the steps: 1. Sit in the driver's seat, reach down with your left hand to find the black plastic lever and pull it hard, the hood will pop open slightly. 2. Get out of the car and go to the front, reach into the gap that just popped open to feel the middle position, push the small lever to the left when you touch it. 3. Simultaneously use your right hand to lift the hood upwards, the support rod will automatically lock in place. If the plastic lever is stiff in winter, wear gloves—once in winter, I tore a small gap when pulling it. If the hood doesn’t pop up high enough, check if the hood latch is rusted and stuck, and lubricate the hinge area.

[SaraAnn]

Emphasize safety precautions! When pulling the release lever under the dashboard, ensure the brake is firmly pressed (put automatic transmission in P gear), as the vehicle may roll on uneven ground. Avoid facing directly at the hood gap when releasing the secondary latch, as the hood may suddenly drop if the support rod fails. For older vehicles, it's advisable to first check the hydraulic struts on both sides: test their support by lifting the hood with your hand. If it feels heavy or makes creaking sounds, they should be replaced immediately to prevent sudden collapse, which is extremely dangerous. When closing the hood, release it from about 30 cm above to allow it to drop freely and lock securely. A distinct 'thud' confirms it's properly locked.

[MacLeilani]

As a decade-long owner's experience: The Roewe 550's 'double safety' design for opening the hood is quite normal. Pay attention to a few key points during operation: If the hood doesn't budge after pulling the cabin lever, check if the wiring harness is broken; if you hear a popping sound but can't find the second latch, it might be blocked by the front trim panel; if the gaps on both sides are uneven after closing, you need to reclose it. By the way, a reminder: every time you open the hood, take a look at whether the grease on the hinges has dried up. It's best not to open the hood on rainy days, as aged seals may let water seep into the engine compartment.