···
Log in / Register

How to Open the Engine Hood of GLC?

4 Answers
MacLola
07/29/25 8:36am
Here is the method to open the engine hood of GLC: 1. Click the button on the main driver's door to open the door and enter the cockpit. 2. Locate the front hood release button below the steering wheel in the cockpit. 3. Pull the red front hood release button above the left foot to unlock the front hood. 4. Pull the lever at the front of the hood to fully open it. Here is some information about the GLC: Exterior Introduction: The new generation Mercedes-Benz GLC adopts the latest family design, with further lengthening of the body and wheelbase. On the front face, the area of the grille has been expanded, featuring a dense mesh pattern, and the LED headlights on both sides seem to have adopted the same "inverted triangle" style as the new CLS. Inside the car, the new central touchpad design is simple and easy to operate, while the newly added steering wheel touch control allows the driver to control the digital instrument panel and central display functions via touch buttons on both sides without taking hands off the wheel.
Was this review help?
6
0
Share
OJason
08/12/25 6:01am
Opening the hood of a Mercedes-Benz GLC is actually quite simple, and as an experienced driver, I do this often. First, sit in the driver's seat, look down to the left footwell area, and find a small lever. Gently pull it, and it will snap back into place. Then, walk to the front of the car, reach under the hood near the center, and you'll feel a small latch. Press it with your finger and lift the hood upward to open it. Make sure the car is turned off, parked, and the engine is cooled down to avoid burns or accidental starts. After opening, don't forget to regularly check the engine oil and coolant—low levels can cause problems. I recommend doing a quick check every month to keep the engine running smoothly. If the lever is hard to pull, try applying some lubricant, but don't force it—repairs can be expensive. Once you're familiar with the steps, it becomes easy after a couple of tries. Practice a few times in the garage to get comfortable.
Was this review help?
11
0
Share
Expand All
McLydia
10/05/25 7:17am
Operating the GLC's engine hood isn't difficult at all. I've shared this with friends when we often tinker with cars. Sit in the driver's seat, and you'll find a release lever near the left footrest. Just pull it, and you'll hear a slight click indicating it's unlocked. Then quickly move to the front of the car, reach into the hood gap to press the central lock button, and lift the hood smoothly. The operation should be fluid, not rushed. Make sure the car is turned off and stationary, and the engine is cool before proceeding to avoid injury. After opening, take a quick glance at the battery status and belt wear to spot any issues early and save money. If it gets stuck, don't force it—it might be due to rust or dust clogging the lock, so consult a professional. Regular minor maintenance can keep your car running smoother.
Was this review help?
17
4
Share
Expand All
PatrickLee
11/19/25 2:01am
As a female car owner, I always prioritize safety when driving my GLC. Before opening the hood, make sure the car is parked and turned off, and the engine is cooled to prevent burns. Inside the car, locate the small lever under the left foot area, gently pull it to release. Move to the front of the car, reach under the hood to the center, press the latch, and then lift the hood upwards to open it. The whole process is quick and easy, but don't forget to confirm you hear the click sound when closing the hood to ensure it's securely locked. After opening, it's best to check if the coolant level is normal, as too little can cause overheating. Developing the habit of checking these details can make driving more reassuring.
Was this review help?
19
5
Share
Expand All
More Forum Discussions

What Kind of Vehicle is a Tow Truck?

A tow truck is a type of special vehicle that requires a Class B driver's license or higher. The following precautions should be taken during towing operations: Conspicuous Colors: Choose towing tools with highly visible colors such as yellow, blue, fluorescent green, or fluorescent red. If the colors are not conspicuous enough, hang colored cloth strips on the towing tools. When towing at night, use towing ropes or towing bars with reflective materials to enhance warning effectiveness. Hazard Warning Lights: Both the towing vehicle and the towed vehicle should turn on their hazard warning lights during operation. Drive along the outermost lane, and you can also affix a "Towing" sign at the rear of the towed vehicle to alert other drivers to drive carefully.
12
5
Share

What are the solutions for engine overheating?

Solutions for engine overheating are as follows: 1. Find a safe place to pull over and let the vehicle idle without turning off the engine, as shutting it down will stop the cooling fan and coolant circulation, making the engine even hotter; 2. Open the hood to increase air circulation. Once the water temperature drops, slightly loosen the radiator cap and wait for the internal steam to escape before fully opening it; 3. Check for any leaks in the radiator hoses and inspect whether the coolant is sufficient. If no coolant is available in the vehicle, mineral water can be used as a temporary substitute, but it must be replaced with new coolant afterward; 4. For engine overheating, the most common actions an average person can take are checking and adding coolant. For other issues caused by faults in components like the water pump or thermostat, professional assistance is required.
12
5
Share

What are the dimensions of a trailer in terms of length, width, and height?

The dimensions of a trailer are 12060x2600x1500 mm (length x width x height). Some precautions for using a trailer are as follows: 1. Prefer a tow bar: If the vehicle behind has braking issues or if towing is required on icy or snowy roads, a tow bar should be prioritized. A rigid tow bar can prevent situations where the towing vehicle pulls too hard or needs to brake suddenly, causing the trailer to lose control and collide with the towing vehicle. In fact, using a tow bar is generally safer even under normal circumstances. 2. Choose the appropriate hitch: The hitch of the trailer should not just be able to 'hook' onto the vehicle; it must be securely fastened and properly installed. Always double-check that the hitch is properly secured before towing. If the hitch comes undone halfway during towing, it can cause significant inconvenience.
11
2
Share

What are the effects of installing the car air conditioning filter backwards?

Installing the car air conditioning filter backwards may affect the filtration efficiency and could potentially reduce the airflow from the air conditioning, though the impact is generally not significant. Here are some tips for determining the correct installation direction: 1. The air conditioning filter has a front and back side and must be installed in the correct orientation, with the front side facing the airflow direction. Inside the car, the airflow typically blows from the bottom upwards; 2. The air conditioning filter usually has an arrow indicator, which points in the direction of airflow and indicates the correct installation direction. Additionally, the two sides of the filter have different surface structures—the ordinary fuzzy side is the front, facing upwards towards the airflow; 3. The side with support wire structures is the back, facing away from the airflow. For filters containing activated carbon, the black side should face the airflow direction (front), while the white side should face away (back).
18
1
Share

Does Dashboard Wax Harm the Car?

Dashboard wax does not harm the vehicle. The wax on the car dashboard is an oily substance that easily attracts dust upon contact. Therefore, dashboard wax is more commonly used on car interiors. After application, the interior looks as good as new and emits a faint fragrance. Functions of Dashboard Wax: It is a specialized maintenance product designed for car leather accessories, dashboards, and other components. It effectively prevents aging of the dashboard and interior parts while offering features like dirt removal, anti-static properties, and UV protection. This liquid wax also provides cleaning, anti-static, and surface maintenance benefits. It is suitable for cleaning various household leather items, wooden products, and appliance casings. How to Use Dashboard Wax: Spray the wax from about 20 centimeters away from the object. Use a clean, soft cloth to spread the wax evenly. When polishing leather seats or dashboards, wait briefly after spraying before wiping with a clean cloth for a shiny finish. For tire beautification, first remove any mud from the tire surface before applying the wax. When used to prevent surface roughness or rust, simply spray the wax directly. Normally, the wax evaporates naturally within 15-20 days. Avoid frequent use—limit application to once a month at most.
9
5
Share

Can the Same Model Car Key Open Another Same Model Car?

In theory, the same model car key cannot open another same model car, but in reality, there have been cases where a key opened someone else's car door. However, there's no need to worry as current car models use rolling code anti-theft systems, with each vehicle having a unique anti-theft code. Even if the door can be opened, the car cannot be driven away. Car keys have a vehicle locating function: The vehicle locating function uses the remote control or alarm system. When the button is pressed, the car's horn will sound and the hazard lights will flash, making it easier to quickly locate your car in crowded parking areas. You can open the trunk with the car key: The remote car key has a button to open the trunk. If you're coming out of a supermarket with bags of groceries—have you ever tried holding down the trunk unlock button (some cars require pressing it twice)? The trunk will automatically pop open.
7
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.