How to Open the Door When the New Magotan Key Fob Battery Dies?

2 Answers
SanLane
07/28/25 11:14pm
When the battery of the New Magotan key fob dies, you can open the door using the following steps: 1. Press the upper part of the key fob and pull out the mechanical key by hand; 2. Find a paper card and press it against the lower part of the driver's door handle; 3. Insert the previously extracted mechanical key into the lower part of the door handle; 4. Pry the mechanical keyhole cover loose by gently lifting it outward and then pull the cover off; 5. Insert the mechanical key into the keyhole; 6. Turn the mechanical key toward the front of the car to unlock the door. The New Magotan is a mid-size sedan under FAW-Volkswagen. Taking the 2020 Magotan 280 Comfort model as an example, its body dimensions are: length 4865 mm, width 1832 mm, height 1471 mm, with a wheelbase of 2871 mm. It is equipped with a 1.4T turbocharged engine, delivering a maximum horsepower of 150 PS.
Was this review help?
11
2
Share
BellaMarie
08/12/25 3:39am
I had the same frustrating experience when my Magotan's key fob ran out of battery – couldn't unlock the door in an emergency. Quickly located the small button on the key fob, pressed it to release the hidden mechanical key (just pull it sideways). The door handle had a plastic cover over the keyhole – easily pried open with a fingernail or coin. Inserted the key, turned counterclockwise, and voilà – door unlocked. Later realized the CR2032 battery typically lasts 1-2 years, but cold winters or frequent remote use drain it faster. Recommendation: always keep spare batteries in the car or check every six months. If stuck, never force it – safer to call roadside assistance. This method works for all modern vehicles – good knowledge to avoid future hassles.
Was this review help?
9
2
Share
Expand All
More Forum Discussions

Can BYD Electric Vehicles Charge Without Turning Off the Engine?

Charging a BYD electric vehicle without turning off the engine can easily lead to safety accidents, so it is recommended to turn off the engine before charging. Here are some precautions for charging new energy electric vehicles: 1. The choice of flame-retardant wires is crucial: When charging, select qualified flame-retardant wires with leakage protection devices. Only high flame-retardant charging cables can prevent electric vehicle fires during charging. 2. Pay attention to the placement of the charger: The charger should be placed on the footrest, and it is strictly forbidden to cover it with items or place it on the seat cushion or inside the seat bucket. Randomly extending the power cord and frequently pulling it can easily cause loose connections, aging wires, and short circuits due to damaged wire insulation. 3. Remember to turn off the ignition lock: Additionally, the ignition lock must be turned off. If the ignition lock is left on while charging, the battery voltage will rise, which can burn out the ignition lock and cause a short circuit fire. If the charger is dropped or collided, the fan can easily be damaged. During charging, observe whether the charger's cooling fan is operating normally. If the fan is damaged, it should be repaired or replaced with a new charger promptly.
4
3
Share

How to Manually Reset the Maintenance Light on a Geely Vision?

To reset the maintenance light on a 2019 Geely Vision, follow these steps: 1. Locate the maintenance light reset button on the vehicle's dashboard. 2. With the engine off, press and hold the maintenance light reset button. 3. Start the vehicle while continuing to hold the maintenance light reset button. 4. After a few seconds, the display will enter the reset mode for the maintenance cycle. 5. Once the reset begins, release the maintenance light reset button, then press the A button within 20 seconds to complete the maintenance light reset on the Geely Vision. Here are some important notes regarding the maintenance light reset: Not resetting the maintenance light will not affect the car's performance. Its main function is to record the mileage of important components. When the vehicle reaches a certain mileage, the maintenance light serves as a reminder for the owner or mechanic. To ensure the vehicle operates normally, always reset the maintenance light after servicing. Otherwise, you won't be able to track the usage of new components during the next replacement.
12
1
Share

How soon can I schedule the Subject 4 test after passing Subject 3 in Xi'an?

You can take the Subject 4 test immediately after passing Subject 3 in Xi'an. According to Article 36 of the 'Regulations on the Application and Use of Motor Vehicle Driving Licenses': The vehicle management office shall arrange the test according to the scheduled test site and time. After the applicant passes the Subject 1 test, they can schedule the Subject 4 test. Below is more information about Subject 4: 1. Test content: Subject 4, also known as the Subject 4 theory test or driver theory test, is part of the motor vehicle driving license assessment. After the implementation of the 'Ministry of Public Security Order No. 139 of the People's Republic of China', the Subject 3 test was divided into two parts: the road test and the addition of a safety and civilization knowledge test, commonly known as 'Subject 4', which evaluates 'driving ethics'. 2. Retake instructions: If you fail Subject 4, you do not need to retake the previously passed subjects (Subject 1, Subject 2, Subject 3). You can schedule a retake on your own, and no additional fees are required for the retake.
10
0
Share

Volkswagen Indirect Tire Pressure Monitoring Failure?

Tire pressure monitoring failure can be addressed by using a tire pressure gauge. For the safety of the vehicle owner, it is recommended to promptly visit a 4S shop for repairs. The correct method for using a tire pressure gauge is as follows: 1. The central line of the pressure measurement port should form a 90°-180° angle with the axis of the gauge body: The scale is a quadrangular prism with a range of 0.07Wpa-0.4Wpa. Before reading, gently tap the instrument's casing or surface glass with your finger to eliminate friction in the transmission mechanism. 2. When observing, the pointer should overlap with the mirror pointer: The value indicated by the pointer at this time is the pressure reading, accurate to one decimal place. Read the temperature value on the pressure gauge, precise to one decimal place. 3. Align and press the measurement end notch of the pressure gauge with the tire valve: At this point, the pointer of the tire pressure gauge will deflect, and the indicated value is the inflation pressure of the tire. If the gauge's indicator rod is pushed out by the pressure, the value displayed on the rod is the tire's inflation pressure. The greater the internal pressure, the more the pointer will deflect.
10
1
Share

What to Do When the Turn Signal Automatically Turns Off During a Right Angle Turn?

You need to immediately reactivate the turn signal; otherwise, it will show that the turn signal is not on, resulting in a deduction of ten points. Below are the precautions for the right-angle turn in Subject 2 of the driving test: 1. Before entering the turn: It is crucial to slow down the speed and align the car body properly. 2. When the car body is aligned: The vehicle should slowly move close to the outer edge line of the road while maintaining a proper lateral distance. It is advisable to keep the outer wheels within about 300mm of the outer edge line and proceed parallel. 3. When the front of the car approaches the turning point: Turn the steering wheel sharply without delay. When the front bumper aligns with the turning point, quickly turn the steering wheel to the left (or right) to the maximum position. Avoid pressing the accelerator pedal abruptly. 4. Rear wheels in the rearview mirror: Remember to turn the steering wheel back. When the front of the car approaches the right-angle turning point, promptly turn the steering wheel back. When the front of the car turns to the new direction, gradually straighten the steering wheel to keep the car moving straight. Additionally, you can observe the movement of the rear wheels in the rearview mirror. When the rear wheels are about to pass the turning point, straighten the steering wheel.
10
3
Share

Is Brake Fluid the Same as Brake Oil?

Brake fluid is the commonly referred to brake oil, a liquid medium used in hydraulic braking systems to transmit braking pressure, employed in a vehicle's hydraulic braking system. Introduction to Brake Fluid: Brake fluid is a highly concentrated liquid with strong water absorption capabilities. After a period of use, its water content gradually increases. Brake fluid should be replaced every 2 years or every 40,000 kilometers driven. Alternatively, professional instruments can be used to measure the water content of the brake fluid. If it exceeds 5%, it should be replaced as soon as possible; otherwise, it may affect driving safety. Precautions for Brake Fluid Replacement: During the brake fluid replacement process, if air enters the oil pipe, the brakes may feel softer after replacement, potentially leading to delayed braking or even brake failure. The brake fluid can be replaced using the complete drainage method: open the brake caliper's bleed valve, start the engine, and repeatedly press the brake pedal until no more fluid comes out of the bleed valve, then tighten it. Refill the reservoir with new fluid, repeatedly press the brake pedal until firmness is felt, then loosen the caliper bleed valve to drain the fluid. Once the pedal lowers, quickly tighten the valve. Repeat this process twice until no air bubbles emerge from the fluid. Be sure to check the fluid level in the reservoir, ensuring it does not drop below the minimum mark.
17
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.