How to open the door when the Baojun 510 runs out of battery?

Does the Baojun 730 Have a Defogging Function?

Baojun 730 has a defogging function. How to use the defogging function of Baojun 730: The glass defogging switch of Baojun 730 is located on the air conditioning panel, featuring a fan-shaped button resembling a glass symbol. When driving, if the front windshield fogs up, simply press this button to automatically activate the front windshield defogging function. Reasons for windshield fogging: Most cases of windshield fogging occur due to a significant temperature difference between the inside and outside of the vehicle. When the outside temperature is lower than the inside temperature, the warm air inside the car cabin condenses on the inner surface of the windshield, forming fog.

16

3

Share

What are the reasons for the BMW 325 fan not spinning?

BMW 325 fan not spinning reasons introduction: Coolant temperature not reaching standard: Most modern car radiator fans operate with electronic temperature control, so the fan usually only starts spinning normally when the engine coolant reaches the required temperature. If the temperature is too low, the radiator fan won't spin. Therefore, when the car radiator fan fails to spin, the first thing to check is whether the coolant temperature meets the requirement. Relay malfunction: If the relay malfunctions, the car's radiator fan won't work either. Thermostat switch problem: If there are no issues with the above two aspects, then you should check the thermostat switch. Sometimes faults can occur here, which can also affect the operation of the car radiator fan, so this should also be checked.

3

1

Share

What are the dimensions of the Genesis GV70?

The dimensions of the Genesis GV70 are 4685/1850/1400MM, with a wheelbase of 2835MM. Exterior of the Genesis GV70: The Genesis GV70 adopts the brand's signature design, featuring the iconic shield-shaped grille and split-type headlight design, which are characteristic of Genesis models. The body design is smooth and rounded, with the triangular window between the C-pillar and D-pillar being a highly distinctive design detail that offers excellent recognition. Interior of the Genesis GV70: Inside, the Genesis GV70 presents a strong sense of luxury. The combination of leather, metal, high-gloss decorative panels, and Alcantara materials creates an impressive interior that rivals its European, American, or Japanese competitors. Additionally, in today's era, a full LCD instrument panel and a large central control display screen are indispensable.

13

1

Share

What Causes the Door Squeaking in BMW X3?

Introduction to BMW X3 Door Squeaking: Lack of Lubrication: The car door is connected to the body via hinges. If the hinges lack lubrication, squeaking will definitely occur when opening or closing the door. This issue is relatively simple to resolve—just lubricate the hinges promptly. Dirty Door Limiter: If the door limiter arm, limiter pin, or other parts accumulate sand, stones, or other debris and are not cleaned in time, it can also cause squeaking when opening or closing the door. In this case, the door limiter should be cleaned promptly. Door Deformation: After a collision, if the door is deformed, it may also produce squeaking noises. This situation requires professional sheet metal repair at a repair shop or 4S store.

19

4

Share

What's the reason for a Volkswagen 7-speed dual-clutch transmission not moving when engaged?

Volkswagen 7-speed dual-clutch transmission not moving when engaged may be due to the following reasons: Automatic transmission oil pan leakage: Loosening of the linkage or cable between the control lever and the manual valve rocker arm, manual valve remaining in neutral or parking position, clogged oil pump inlet filter screen, severe leakage in the main oil circuit, or oil pump damage. Not pressing the accelerator: Some automatic transmission vehicles can move when shifted to D gear and the brake is released, while others require pressing the accelerator to move. This is actually related to the type of transmission power coupling device. After shifting to D gear, the clutch remains disengaged, and no power is transmitted, so the vehicle does not move. When the accelerator is pressed, the clutch gradually engages, allowing power to be transmitted, and the vehicle begins to move forward.

1

2

Share

What are the reasons for the Volkswagen Polo window not being able to go up and down?

Introduction to the reasons why the Volkswagen Polo window cannot go up and down: Loose screws on the window regulator: In this case, the window will vibrate and make abnormal noises. Window regulator stuck: All window regulators will not work. Long-term use of the vehicle: Due to reasons such as rubber aging and dust accumulation in the rubber guide channel of the window glass, the window glass often rises slowly or stops at a certain position. Some window glasses will tilt to one side when rising, making it difficult to rise, etc. Incorrect operation of the window switch in daily use: The correct way to use the window switch is: when lifting, lift the switch all the way, and when lowering, press it all the way. Avoid operating the switch bit by bit, as the contacts will instantly bear a strong current, leading to burning out the switch.

12

3

Share

How to open the door when the Baojun 510 runs out of battery?

Does the Baojun 730 Have a Defogging Function?

What are the reasons for the BMW 325 fan not spinning?

What are the dimensions of the Genesis GV70?

What Causes the Door Squeaking in BMW X3?

What's the reason for a Volkswagen 7-speed dual-clutch transmission not moving when engaged?

What are the reasons for the Volkswagen Polo window not being able to go up and down?

Where is the air intake located on a BMW M5?

What Material Are BMW Fenders Made Of?

How to cancel the maintenance reminder display on Volkswagen Lavida?

Is the MG ZS lens a bi-xenon lens?