How to open the door when getting off the Odyssey?

3 Answers
ColtonLee
07/24/25 1:11pm
There are left and right door opening buttons above the driver's license. Press them to open the automatic door. Use the automatic door handle, pull it once, and release it to open the door.
Was this review help?
14
5
Share
MackenzieLee
08/10/25 6:33am
Every time I drive the Odyssey, I first make sure the vehicle is parked and turned off, then pull the inner handle of the front door to open it directly—simple and practical. The sliding doors at the back are even more convenient. If the car has the electric function, just a gentle pull or pressing the small button on the side of the door will automatically slide it open. Remember to glance at the rearview mirror or window before getting out to check for pedestrians or bicycles passing by, ensuring safety. The Odyssey's design is user-friendly, and the child lock option is crucial. I always remind my family how to activate it to prevent children from accidentally opening the door while driving. Additionally, if the lock is engaged, you need to unlock it via the button or remote key first to avoid the handle being stuck. These small details make the door-opening process smoother.
Was this review help?
2
4
Share
Expand All
McAddyson
09/25/25 5:50am
Safety comes first. Before opening the car door, I always check the surroundings, such as whether there are any vehicles or people approaching in the rearview mirror. Pulling the front door handle is straightforward, but the operation of the rear sliding door is different—it might require using an internal pull rod or lightly touching the switch panel. The Odyssey often comes with electric assist functions, so I test whether the buttons respond normally. Don’t forget to check if the key is in the locked state, and unlock it if necessary before pulling. If the door gets stuck, it might be due to debris or a lock malfunction, so I inspect it immediately to avoid forcing it and causing damage. This habit reduces the risk of accidents and is worth cultivating every time.
Was this review help?
3
3
Share
Expand All
More Forum Discussions

Where are Chevrolet car engines produced?

Among the currently available Chevrolet models, except for the engines of imported models such as the Camaro, Colorado, and Silverado which are produced in the United States, the engines of other models are manufactured in China. Chevrolet is an automobile brand under General Motors (GM) of the United States, established on November 3, 1911. It is an American brand primarily manufacturing sedans, sports cars, SUVs, and pickup trucks. Notes regarding car engines: 1. The engine should be cleaned approximately every 20,000 kilometers of driving; 2. It is recommended to change the engine oil and oil filter approximately every 5,000 kilometers of driving; 3. Try to avoid keeping the engine under overload operation for extended periods, as it not only increases fuel consumption but also reduces the engine's service life.
12
1
Share

What is the engine model of the Malibu XL?

The engine model of the Malibu XL is LSY, which includes a 1.3-liter three-cylinder turbocharged engine and a 2.0-liter four-cylinder turbocharged engine. The 1.3-liter version delivers a maximum horsepower of 165 hp, while the 2.0-liter version offers a maximum horsepower of 241 hp. The three-cylinder engine can enhance fuel efficiency while maintaining vehicle performance, making it a common choice for compact cars. The Malibu XL is a mid-size sedan produced by SAIC-GM Chevrolet, with dimensions of 4933mm in length, 1854mm in width, and 1472mm in height, and a wheelbase of 2829mm. It features a MacPherson strut front suspension and a multi-link independent rear suspension.
10
2
Share

How Many Years Can a Normal Private Car Be Driven?

Private cars generally have a service life of 15 years. According to the Road Traffic Law of the People's Republic of China, non-commercial vehicles have a mandatory scrapping period of 15 years, while motorcycles have a scrapping period of 10 years. Commercial vehicles require an annual mandatory inspection and have a scrapping period of 10 years. Below is an introduction to the mandatory scrapping standards for vehicles: 1. Vehicles that have reached the prescribed service life. 2. Vehicles that still fail to meet the national safety technical standards for in-use vehicles after repair and adjustment. 3. Vehicles that still fail to meet the national standards for pollutant or noise emissions for in-use vehicles after repair, adjustment, or the adoption of control technologies. 4. Vehicles that have not obtained the mandatory inspection qualification mark for three consecutive inspection cycles after the expiration of their inspection validity period.
6
2
Share

What are the body specifications and dimensions of the Fit?

The body specifications and dimensions of the Fit are as follows: length 4065 mm, width 1695 mm, height 1525 mm, with a wheelbase of 2530 mm. In terms of power, the Fit is equipped with a 1.5-liter naturally aspirated engine, model code L15B3, delivering a maximum power of 96 kW and a maximum torque of 155 Nm. The engine reaches its maximum power at 6600 rpm and maximum torque at 4600 rpm. Exterior-wise, the Fit adopts Honda's new family front-face design concept called 'solidwing,' where the front grille integrates seamlessly with the headlights, highlighting a sharp and sporty look. The side profile features a distinctive sporty blade-style double waistline design.
11
2
Share

How to reset the maintenance light on Audi S3?

Audi S3 maintenance light reset method: 1. Press and hold the button next to the odometer, turn ignition switch ON; 2. SERVICE or SERVICEIN will appear on the LCD display; 3. Release the button, press the button on the left side of the instrument panel (near the tachometer) to reset the display, and SERVICEIN10000MI will appear on the LCD; 4. Turn ignition switch to OFF position. For interior features, the Audi S3 comes with a three-spoke sport steering wheel, gray-white dashboard needles, combined with all-black interior, giving the new car's cabin a thoroughly sporty style.
16
2
Share

How many cylinders does the Sylphy engine have?

Sylphy is equipped with a four-cylinder engine. The Sylphy uses a 1.6-liter naturally aspirated four-cylinder engine with the model code HR16, delivering a maximum power of 102 kW and a maximum torque of 169 Nm. This engine features multi-point fuel injection technology and utilizes an aluminum alloy cylinder head and block. It is paired with either a 5-speed manual transmission or a CVT transmission. The Sylphy is a compact family sedan under the Nissan brand, with a wheelbase of 2,712 mm and dimensions of 4,641 mm in length, 1,815 mm in width, and 1,450 mm in height. The front suspension of the Sylphy employs a MacPherson independent suspension, while the rear suspension uses a torsion beam non-independent suspension. The torsion beam rear suspension is designed to maximize rear passenger space and trunk capacity.
15
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.