How to Open the Child Lock on a Bora?
5 Answers
For the rotary knob type child lock, you need to insert a key or the appropriate tool into the child safety lock hole to turn the knob switch. The toggle type child lock does not require a key. There is a direct toggle switch that can be flipped by hand to open or close the child lock. Parents with children should activate the child lock before going out, but never leave children or individuals in need of assistance locked inside the car.
I've used the child lock on my Bora many times, and it's quite simple to operate. Open the rear door, and you'll see a small knob or lever on the side edge of the door. For the knob type, insert the car key and turn it to the LOCK position, usually by rotating it clockwise all the way; for the lever type, simply push it down to the lock icon position. Make sure you hear a click to confirm it's locked, and test that the door cannot be opened from the inside to ensure success. Both rear doors need to be set separately, otherwise, children might open the door from the unlocked side. This feature is especially important for child safety, and I always pull the door handle a few times to double-check after locking. Remember to reverse the operation to unlock it, and don't forget to turn off the child lock when the kids get out, or adults won't be able to open the door either.
When I first used the Bora's child lock, I got the direction wrong before figuring out the trick. After opening the rear door, locate the switch along the door edge. For knob-type locks, turn the key toward the lock symbol direction until it won't budge; for lever-type, simply push it all the way down. The key is to test afterward: close the door and ensure it can't be opened from inside. Always operate both side doors—once I missed the right side, and my child nearly opened it. Now I also check if door seals are trapping clothing to prevent improper locking.
The Bora's child lock is quite convenient. After opening the rear door, you can find the control switch right next to the door lock. For the rotary type, you need to insert the key into the small hole and turn it about 90 degrees, while for the lever type, simply push it all the way down. Make sure the door is fully open to have enough space for operation. Here's the key point: After setting it, you must confirm that the door cannot be opened from the inside to ensure it's properly locked; otherwise, the operation might not be done correctly. Both doors need to be set—you can't be careless when traveling with children. I make it a habit to check the child locks before starting the car, so no matter how much the kids act up during the drive, they can't open the doors, making it much safer. I suggest you develop this habit too—safety always comes first.
The child lock of the Bora is located on the side of the rear door and can be seen when the door is opened. For the knob type, turn it with a key; for the lever type, simply push it down. After operation, close the door to test—if the door cannot be opened from the inside, it’s correctly locked. This lock is highly effective, preventing children seated in the rear from accidentally opening the door. Remember to lock both doors, otherwise accidents may occur. Always put the key away after use and keep it out of children’s reach.
