How to Open the Charging Port Cover of BYD Han?

What are the requirements for meeting oncoming vehicles in the Subject 3 driving test?

Subject 3 requirements for meeting oncoming vehicles are as follows: 1. When meeting oncoming vehicles on roads without central isolation facilities or center lines, failing to slow down and drive on the right, or failing to maintain a safe distance from other vehicles, pedestrians, or non-motorized vehicles will result in a 100-point deduction; 2. Failing to yield when meeting oncoming vehicles is difficult will result in a 100-point deduction; 3. Poor judgment of lateral safety distance and emergency steering to avoid oncoming vehicles will result in a 100-point deduction. More details are as follows: 1. Regarding the operation during vehicle encounters, examination regulations vary by region. Some areas only require lightly tapping the brakes, some require that the right side of the vehicle body does not exceed 40 cm from the right boundary line, and some areas require the speed not to exceed 30 km/h. Specific test requirements should be consulted with the local vehicle management office or the instructor. 2. When hearing the voice prompt, the right turn signal should be activated, the situation of the vehicle behind should be observed, and the speed should be reduced with downshifting if necessary. After confirming safety, gradually move into the right lane, and when the raised part of the wiper just coincides with the right boundary line, the body is about 30 cm from the right boundary line. 3. Students can also use the right rearview mirror to judge the distance. When the current door handle position is tangent to the roadside right boundary line and the body is parallel to the boundary line, the vehicle is also about 30 cm from the right boundary line.

18

5

Share

Do Privacy Glass Need Window Tinting?

Privacy glass does require window tinting. Here is an introduction to window tinting: 1. Besides protecting privacy, the main functions of window tinting are safety, explosion-proof, and heat insulation. 2. In case of an accident while driving, the glass can easily shatter and cause injuries. The tint film helps secure the glass fragments to prevent secondary injuries. High-quality films also provide excellent heat and UV insulation, preventing excessive temperature inside the car. Below are the steps and precautions for window tinting: 1. To avoid dust and impurities affecting the tinting effect, the car's glass must be thoroughly cleaned before applying the film. 2. Areas that might be damaged during the tinting process should be covered in advance to prevent scratches on the car paint or interior. Any accessories that might interfere with the process should also be removed beforehand. 3. After the overall preparation of the car body, the film should be cut according to the size of the glass for an initial fit. 4. The roughly cut film is then applied to the car glass. The front and rear windshields need to be heated (using a heat gun) to conform the film to the curvature of the glass, ensuring a smooth application without water marks. 5. After heating, the film will adhere closely to the glass. Further adjustments are then made, precisely cutting the film to match the shape of the glass. 6. Since window tinting is applied to the interior side of the glass, a crucial step is the installation of the film. The interior side of the glass must be cleaned thoroughly, and the film must be applied quickly and accurately to push out any water bubbles. 7. After completing all the steps, a final inspection is necessary. Check each window, especially the edges and corners, and address any bubbles immediately. 8. After the tinting is done, avoid rolling down the windows for 2-5 days. The rear windshield's defogger function should not be used, and the front windshield should not be exposed to direct air from the air conditioner. Avoid using serrated items to clean the glass. After the installation, make sure to fill out the warranty application form to ensure future after-sales service. It is recommended to return to the shop for a follow-up inspection after 3 days to address any quality issues promptly.

19

1

Share

What documents are required for the 6-year exemption vehicle inspection?

The "Regulations for the Implementation of the Road Traffic Safety Law of the People's Republic of China" stipulates that the materials required for the 6-year exemption vehicle inspection are divided into the following situations: If applying offline, the vehicle owner needs to prepare the following documents: vehicle license (in duplicate), the owner's ID card, compulsory traffic insurance policy, and proof of vehicle and vessel tax payment or exemption. These should be submitted to the local vehicle management office for processing, with no fees required. If authorizing an agency to handle the process, the original ID of the agency representative and a written authorization signed by the vehicle owner must also be provided. For online applications, the required materials include copies of both sides of the owner's ID card (1:1 original print), the original vehicle license, the second copy of the compulsory traffic insurance policy, a personal electronic photo, and a photo of the owner holding their ID card (with the face and ID details clearly visible). The standards for the 6-year exemption are as follows: The vehicle must be a non-commercial automobile. The vehicle must have a seating capacity of 6 or fewer. Starting from November 20, 2020, non-commercial small passenger vehicles with 7-9 seats (excluding small trucks) are included in the exemption. The vehicle type indicated on the license must be: passenger cars (small, medium, or large), small general passenger vehicles, small off-road passenger vehicles, medium general passenger vehicles, medium off-road passenger vehicles, or medium special-purpose passenger vehicles. Vehicles that have not been registered within four years from the date of manufacture are excluded. The vehicle must meet the above criteria and must not have been involved in any fatal traffic accidents during the exemption period. According to the "Regulations for the Implementation of the Road Traffic Safety Law of the People's Republic of China," the main items of vehicle inspection include: Exterior inspection: mainly checking the vehicle's lights, body appearance, suspension, sunroof, and tires, ensuring the lights function properly, the body has not been repainted, and the suspension has not been modified. Emission test: ensuring the vehicle's exhaust emissions meet national standards during high-speed operation. On-road test: primarily testing the vehicle's braking system, headlights, horn, and chassis. Violation check: all traffic violations must be resolved before the inspection to pass. Vehicle inspections can be conducted up to 90 days in advance but must not be overdue. The consequences of overdue inspection, as per the "Regulations for the Implementation of the Road Traffic Safety Law of the People's Republic of China," are as follows: Vehicles that fail the annual inspection on time are not allowed on the road. Driving an overdue vehicle results in a 3-point penalty and a 200 CNY fine. If an accident occurs involving an overdue vehicle, the owner bears full or primary responsibility, and insurance will not cover the damages. Driving an overdue vehicle is considered illegal and may result in vehicle impoundment.

11

3

Share

How many points will be deducted for not wearing a seat belt in the front passenger seat?

Passengers not wearing seat belts will not result in point deductions but will be fined between 20 and 200 yuan. Below is more information about seat belts: 1. Relevant regulations: According to the "Road Traffic Safety Law of the People's Republic of China," both drivers and passengers must use seat belts as required. 2. Function of seat belts: In case of unexpected situations while riding in a vehicle, wearing a seat belt can effectively protect life safety. Both drivers and passengers should wear seat belts, and the Road Traffic Safety Law also stipulates that passengers in the front seat must use seat belts.

4

Share

What are the speed limits on different roads?

Here are the speed limits for different types of roads: 1. Roads without a center line: The speed limit is 30 km/h in urban areas and 40 km/h on highways. 2. Roads with only one lane in the same direction: The speed limit is 50 km/h in urban areas and 70 km/h on highways. 3. On urban roads without speed limit signs or markings: The maximum speed should not exceed 70 km/h. 5. Rural roads: The speed limit should not exceed 60 km/h. 6. On roads with two or more lanes in the same direction without speed limit signs or markings: The maximum speed is 70 km/h in urban areas, and 80 km/h on closed motor vehicle-only roads and highways.

19

2

Share

Can I still use it if I smell the burning odor of the clutch plate?

Due to abnormal friction, the clutch plate generates high temperatures, leading to damage, and should not be used further. Possible causes of clutch plate issues include: 1. Improper operation by the driver, such as riding the clutch, which causes continuous friction between the clutch plate, pressure plate, and flywheel, generating high temperatures that can burn the clutch plate. 2. Sudden release of the clutch pedal during operation, causing abrupt engagement of the clutch plate, which can easily lead to disintegration of the clutch plate and damage to the pressure plate surface. 3. Excessive use over time or mileage, resulting in natural aging and wear of the clutch plate. 4. Poor-quality clutch plate material, leading to premature damage.

1

5

Share

How to Open the Charging Port Cover of BYD Han?

What are the requirements for meeting oncoming vehicles in the Subject 3 driving test?

Do Privacy Glass Need Window Tinting?

What documents are required for the 6-year exemption vehicle inspection?

How many points will be deducted for not wearing a seat belt in the front passenger seat?

What are the speed limits on different roads?

Can I still use it if I smell the burning odor of the clutch plate?

Are all manual-automatic transmission cars equipped with AT transmissions?

What materials are used for car polishing?

Is there a subsidy for scrapping National IV emission standard vehicles?

How long can the red ribbon on a new car be removed?