How to Open the Changan CS75 Plus Key?

2 Answers
ODelilah
07/29/25 5:55am
There is a button labeled 'push' on the side of the key. Press it to pull out the mechanical key. Use the mechanical key to unlock the car door. Then, bring the main body of the key close to the one-touch start button and press the button to start the vehicle. Related information is as follows: 1. The Changan CS75 Plus is a compact SUV under the Changan brand. It is equipped with two types of engines: a 1.5-liter turbocharged engine and a 2.0-liter turbocharged engine. 2. The 1.5-liter turbocharged engine delivers 178 horsepower and a maximum torque of 265 Nm. It is paired with either a 6-speed manual transmission or a 6AT transmission. The 2.0-liter turbocharged engine provides 233 horsepower and a maximum torque of 360 Nm, matched with an 8AT transmission.
Was this review help?
13
3
Share
HeidiLynn
08/12/25 9:26am
Last week, I just helped my neighbor open the key fob of their Changan CS75 Plus—it was a pretty simple story. There's a small groove on the back of the key, near the logo. I used a coin to gently pry it, and the cover popped right off. Inside was a small battery, model CR2032, very common. Remember not to use too much force, or the plastic casing might crack—I ruined a key the first time I tried because I was in a hurry. When putting it back together, just align the clips and press gently. Check the battery contacts for dust or corrosion—cleaning them will make the remote more responsive. It’s best to replace the battery every two years to extend the key’s lifespan. Keep a spare battery in the car just in case—if the remote stops working, it’s a sign to be cautious.
Was this review help?
17
4
Share
Expand All
More Forum Discussions

Will points be deducted for failing to yield to pedestrians when turning left?

Points will be deducted. When driving through a crosswalk, failing to stop and yield or give way as required will result in a 3-point deduction. Here are the relevant details: 1. According to Article 47 of the 'Road Traffic Safety Law of the People's Republic of China': When a motor vehicle approaches a crosswalk, it should slow down. If pedestrians are crossing the crosswalk, the vehicle must stop and yield. When a motor vehicle is on a road without traffic signals and encounters pedestrians crossing the road, it must give way. 2. Article 91: If a motor vehicle driver violates the road traffic safety laws and regulations regarding road usage, they will be given a warning or fined. If there are other provisions in this law, penalties will be imposed accordingly.
8
1
Share

What are the symptoms of a faulty front oxygen sensor in the Lavida?

Here are the symptoms of a faulty front oxygen sensor in the Lavida: 1. Symptom one: The oxygen sensor fault light will illuminate. 2. Symptom two: The engine will shake. 3. Symptom three: The exhaust will produce a popping sound and emit an irritating odor. Below are the solutions for a faulty front oxygen sensor: Use a fault diagnostic tool to check the voltage. Here are the precautions for removing the oxygen sensor: 1. Precaution one: Install the socket to the base of the oxygen sensor and forcefully loosen it. 2. Precaution two: When loosening, pay attention to the wiring harness on the oxygen sensor; do not rotate it all the way to the bottom to avoid deformation or breakage of the wiring harness. 3. Precaution three: After loosening, adjust the rotation angle back and forth multiple times to protect the wiring harness. 4. Precaution four: Socket sizes vary, ensure the size is suitable for the oxygen sensor before use.
16
1
Share

What is the fuel consumption of the Audi Q5L?

The actual fuel consumption of the Audi Q5 is 8.2 to 9.9 liters per 100 kilometers. More details about the 2020 Audi Q5 are as follows: 1. Introduction: It belongs to the mid-size SUV category, with body dimensions of length 4753mm, width 1893mm, height 1659mm, a wheelbase of 2908mm, a fuel tank capacity of 73 liters, and a curb weight of 1855kg. 2. Configuration: The front suspension is a five-link independent suspension, and the rear suspension is also a five-link independent suspension. It is equipped with a 2.0L turbocharged engine, producing a maximum horsepower of 190PS, a maximum power of 140kW, and a maximum torque of 320Nm, paired with a 7-speed dual-clutch transmission.
7
4
Share

Where is the throttle located?

In manual transmission cars, from left to right, they are the clutch, brake, and throttle, while in automatic transmission cars, the brake is on the left and the throttle is on the right, so the throttle is located on the right. Below is an introduction to the throttle: 1. Throttle introduction: The throttle, also known as the accelerator or throttle valve, is a control device that regulates the engine's power (thrust). In piston aircraft engines, the throttle controls the opening of the carburetor's throttle valve to regulate the cylinder's filling amount, thereby determining the engine's output power. In gas turbine engines, the throttle controls the metered fuel flow of the fuel regulator, thus determining the thrust produced by the engine. 2. Usage: In manual transmission cars, the left foot is only responsible for pressing the clutch pedal, while the throttle pedal and brake pedal are both controlled by the right foot. In automatic transmission cars, the left foot is not used, and only the right foot controls the brake pedal and throttle pedal.
6
3
Share

What is the time limit for the Subject 1 exam?

The exam has a time limit of 45 minutes. According to the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses," the Subject 1 exam can be taken twice on the same day. If the first attempt is unsuccessful, a free second attempt is allowed. If the second attempt also fails, the Subject 1 exam is terminated, and the candidate must wait ten days before rescheduling. Subject 1, also known as the theoretical exam or driver's theory exam, is part of the motor vehicle driver's license assessment. The exam content includes driving theory basics, road safety laws and regulations, local regulations, and related knowledge. The exam is conducted on a computer. The Subject 1 exam consists of 100 questions, divided into single-choice and true/false questions, each worth 1 point, totaling 100 points. If a candidate answers 11 questions incorrectly, the system will automatically submit the exam and end the test. Subject 1 exam content: Regulations on driver's licenses and motor vehicle management; Road traffic conditions and regulations; Road traffic safety violations and penalties; Road traffic accident handling regulations; Basic knowledge of motor vehicles; Local regulations; Knowledge of braking systems and safety devices for large and medium-sized passenger and freight vehicles; Specialized knowledge for wheeled self-propelled machinery, trams, and trolleybuses. Subject 1 exam precautions: Candidates should dress appropriately for the exam; no slippers are allowed. Electronic devices and bags are prohibited in the exam room. Bring your ID card and queue to enter the waiting hall. Observe the precautions and procedures on the large screen, and store personal items in a locker before entering the exam room. Upon entering, the identity verification desk will assign a seat. After finding your seat, begin the exam. Ensure the camera is aligned with you and follow exam discipline. If you fail the first attempt, a retake is available the same day. If you fail again, you must pay to reschedule. After the exam, queue to collect your score report and sign it. Failure to sign renders the result invalid. There is no limit to the number of times you can schedule the Subject 1 exam. Each subject can be taken once, with one retake allowed if the first attempt is unsuccessful. If the retake is also unsuccessful, the exam is terminated, and the applicant must reschedule. For Subject 2 and Subject 3, only five exam attempts are allowed, and rescheduling must occur ten days later. If the Subject 3 safe driving knowledge exam is unsuccessful, the passed road driving skills exam results remain valid. There are three subjects in the driver's license exam: Subject 1, Subject 2, and Subject 3. Subject 1 refers to the road traffic safety laws, regulations, and related knowledge exam. Subject 2 refers to the field driving skills exam. Subject 3 is divided into two parts: road driving skills and safe driving knowledge. The safe driving knowledge exam is conducted after Subject 3, so it is commonly referred to as Subject 4. However, the official term (as per the Ministry of Public Security Order No. 123) does not include "Subject 4."
16
3
Share

What is the situation when the gear of Audi A6 cannot be engaged?

Generally, it is caused by incorrect positioning or damage of the gear switch, which can lock the gear lever. Most vehicles have a lock release switch, but it will limit the engine's power transmission and gear engagement. The method of using the gears in Audi A6 is: 1. D is the drive gear: Step on the brake, press the button on the side of the gear lever and push it downward; 2. P is the parking gear: Press and hold the P button on the gear lever. The Audi A6 is equipped with a 2.0T turbocharged engine, with a maximum power of 140 kilowatts, a maximum power speed of 5000 to 6400 revolutions per minute, a maximum torque of 320 Newton meters, and is paired with a 7-speed dual-clutch transmission.
14
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.