How to Open the Car Jack?

[MacTeagan]

Before lifting, locate the lifting points. There will be marked lifting points near each tire of the vehicle. After positioning, raise the jack slowly and securely engage it with the lifting point. Turn the knob on the jack by hand until it can't be turned anymore, then use the connecting rod tool.

[DelArianna]

Well, about using the car jack, I often change tires myself, so here's some experience to share. First, find a flat spot to park, engage the handbrake, and shift to P or first gear to ensure safety. Then open the trunk and check near the spare tire—the jack is usually tucked in a hard case or mounted on a bracket; be careful not to pinch your fingers when pulling it out. Some are foldable, so you'll need to extend and assemble the brackets, then insert the crank handle. Placement is crucial—it must be on the vehicle's frame support point underneath (never on plastic parts, or you might damage the body). Turn the handle steadily and slowly to lift until the tire is just off the ground; don’t over-lift to avoid risks. After use, always check if the latch is secure before lowering and storing it. I always keep mine in a dry place to prevent rust and ensure smooth operation next time. Safety first—never crawl under the car while it's supported by just the jack; always use jack stands to secure the vehicle.

[MacNora]

As an ordinary person who enjoys DIY car repairs, here's how I generally use a car jack step by step: After opening the vehicle's trunk, I search for the jack components in the spare tire compartment—commonly a scissor jack or hydraulic jack. I carefully remove it and lay it flat on the ground, usually requiring loosening a securing bolt or inserting a turning handle. I then position it at the designated point on the chassis—metal markers near the wheel indicate the spot. Crouching down, I turn the handle to raise the jack evenly, stopping once the tire lifts about 1-2 cm off the ground. After completing the task, I slowly lower the jack by turning the handle in reverse, avoiding sudden release. When changing a tire, it's best to wear gloves for grip and choose a firm concrete surface—soft or uneven ground can make the jack unstable. Beginners should first review the manual or watch a tutorial video to avoid confusion during emergencies.

[Valerie]

I drove my old car for ten years and used the jack countless times. Here's a simple guide on how to operate it. Open the trunk and find the small jack bag, assemble the support part, and place it steadily on the metal point under the car. Turn the central wrench slowly to lift it up, avoiding sudden movements to prevent jamming. When finished, simply rotate it back to lower the car.