How to Open the Bonnet of the Bin Yue?

1 Answers
DelDawson
07/29/25 9:19pm
The method to open the bonnet of the Bin Yue is as follows: 1. Locate and press the unlock button in the control area on the left side of the steering wheel; 2. After the bonnet pops up, reach into the gap and pull the latch; 3. Lift the bonnet. Taking the 2020 Bin Yue as an example, its body dimensions are: length 4330mm, width 1800mm, height 1609mm, wheelbase 2600mm, fuel tank capacity 45l. The 2020 Bin Yue features a MacPherson strut front suspension and a torsion beam rear suspension. It is equipped with a 1.4L inline 4-cylinder turbocharged engine, with a maximum horsepower of 141ps, maximum power of 104kw, maximum torque of 235nm, paired with a 6-speed manual transmission.
Was this review help?
13
3
Share
More Forum Discussions

How Often Should Motorcycles Be Inspected Under the New Regulations?

Motorcycles within four years of purchase must be inspected every two years, while those over four years old require annual inspections. Below is relevant information about vehicle inspections: 1. Required documents for inspection: Bring the vehicle registration certificate, compulsory traffic accident liability insurance policy, the inspector's ID card, a triangular warning sign, and a fire extinguisher. A copy of the insurance policy must be submitted during the inspection, which will be retained by the inspection agency. 2. Inspection process: Drive the vehicle to the inspection station for an exterior check, fill out the motor vehicle exterior registration form with the staff, pay fees and log information, undergo online vehicle testing, and collect and affix the inspection compliance label to the upper right corner of the front windshield. 3. Inspection cost: Approximately 200 yuan.
14
1
Share

What to Do When the Water-Fuel Separator Light Comes On?

When the water-fuel separator light comes on, you can open the drain valve under the separator's reservoir to release the accumulated water. Below are detailed explanations about the water-fuel separator: 1. Function: The water-fuel separator is designed to separate water from fuel before it enters the fuel injection pump, utilizing the difference in gravity between fuel and water. 2. Reason for the Light: If the water-fuel separator warning light remains on, it is usually not a component issue. After prolonged use, water accumulates inside the separator, and when it reaches a certain level, the indicator light will illuminate. 3. Troubleshooting: If the light stays on after draining the water from the separator's reservoir, the issue might lie with the water-fuel separator sensor. Use a multimeter to check the sensor's voltage, which should normally be 12V and 5V. If the readings are abnormal and after confirming that it's not due to wiring issues or poor contact, replace the water-fuel separator sensor.
2
5
Share

Why are the Yidong and Santana models used for driving tests?

Both the Santana and Yidong have relatively low prices and fuel consumption, which is one of the reasons driving schools choose to purchase these vehicles. They have a good reputation, as both models were among the earliest to enter the Chinese market. These cars are known for being "indestructible" and are exceptionally suitable for driving school use. Currently, the Yidong and Santana have become the first batch of vehicles designated for driving tests in China. This is because traffic authorities require a unified standard, making these two models the preferred choice for driving schools. Below is additional information: 1. Yidong: Compared to its competitors, the Yidong's design does not blindly follow the current trend of sleek, tech-heavy styles. Instead, its lines convey a delicate, ethereal feel reminiscent of a foggy city. The spindle-shaped front grille is not exclusive to any brand, and the Yidong successfully expresses its unique style. Additionally, Changan's exterior assembly and paintwork have always been of high quality, a tradition continued with the Yidong. 2. Santana: As one of Volkswagen's flagship models, the Santana is far from obsolete. It offers reliable stability during driving and is unlikely to encounter major issues in the short term. Its engine displacement design also contributes to relatively low fuel consumption.
3
2
Share

What are the differences between the Fista Sport Edition and the Smart Speed Edition?

Fista Sport Edition and Smart Speed Edition have the following differences: 1. The Smart Speed Edition has 14 more horsepower, adds lane change assist, 2 more directions for seat height adjustment, lumbar support, electric adjustment for the driver's seat, heating function for the front seats, foldable rear seats in a certain ratio, GPS navigation with car internet, voice recognition control system, rear air vents and dual-zone temperature control, and PM2.5 filtration. 2. The interior of the Smart Edition Fista is based on Hyundai's latest design style, with clear functional divisions. It features a floating central control screen, a three-spoke flat-bottom sports steering wheel, and lines that emphasize a sense of strength. The overall layout is somewhat similar to the Hyundai Encino, with a distinct sporty vibe.
18
4
Share

Can the New Santana's Timing Belt Last for 200,000 Kilometers?

The New Santana's timing belt can last for 200,000 kilometers, but regular maintenance and timely replacement are recommended. Below are the relevant details: 1. New Santana: The exterior design of the New Santana no longer resembles the 'Pusang' or Zhijun models. Its family-oriented front grille is similar to the design of models like the New Lavida, making it more aligned with contemporary aesthetics compared to its predecessor. The vehicle features smooth and well-proportioned body lines, with a simple yet enduring design style. 2. Timing Belt: The timing belt is a crucial component of the engine's valve system. It connects to the crankshaft and ensures accurate intake and exhaust timing through a specific transmission ratio. Belts are used instead of gears for transmission due to their lower noise levels, minimal self-variation, and ease of compensation. However, it is evident that the lifespan of a belt is shorter than that of metal gears, necessitating regular replacement.
12
0
Share

How to eliminate the yellow engine light on Baojun 510?

Baojun 510 yellow engine light elimination methods are as follows: 1. Poor combustion state - The poor combustion state of the engine is the main reason for the engine fault light to illuminate, which can be eliminated by improving the combustion state; 2. Engine knocking - There are usually three situations: First situation: The car lacks power; Second situation: The car lacks power with excessive engine noise; Third situation: Obvious knocking sound from cylinders. In the first situation, some engine fault lights may illuminate while others may not, but in the second and third situations, the engine fault light will definitely illuminate; 3. Internal causes of engine fault light illumination: Poor fuel quality, unclean engine cylinders with accumulated carbon deposits. Addressing these three issues can eliminate the yellow light.
6
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.