How to Open Car Drain Holes?

1 Answers
VonAmy
07/29/25 11:42pm
To open the car drain holes, follow these steps: 1. Open the car door and locate all the drain holes; 2. Remove the covers from the drain holes. Depending on their location, car drain holes can be categorized into door drain holes, sunroof drain holes, air conditioning drain holes, fuel filler drain holes, drain holes under the front windshield, and car condensation drain holes. The car drain holes are located in: 1. The front windshield area of the engine compartment; 2. The four corners inside the sunroof; 3. The lower part of the front and rear doors; 4. Inside the fuel filler cap; 5. The bottom of the spare tire in the trunk; 6. The gaps between the front and rear headlights and the body fenders.
Was this review help?
19
3
Share
More Forum Discussions

What is the application scope of 220 gear oil?

It is suitable for gear transmission devices operating under high temperature and high load conditions in the steel industry; suitable for gear devices in the paper industry that require high temperature and excellent demulsification performance; and suitable for gear transmission devices in ships with significant temperature variations. Below is relevant information about gear oil: 1. Automotive gear oil: 220# falls under the viscosity category of ISO3448 industrial lubricants and does not meet the specifications for automotive use. Automotive gear oil is defined by SAE viscosity grades, typically 80W-90 for manual transmissions and 85W-140 for axle oils. Automatic transmission oil follows different specifications. 2. ISO viscosity grade: The ISO viscosity grade is one of the most fundamental, important, and correct criteria for oil selection. ISO is the English abbreviation of an organization. Its full name is International Organization for Standardization. ISO is the largest international standardization organization in the world.
5
2
Share

Can Car Keys Be Self-Duplicated?

Yes, they can. If you have a spare key, it can be used normally. Additional information: 1. Car keys are relatively more secure and advanced compared to ordinary house keys. To duplicate a remote key, the 4S shop needs to match the new key with a "code" from the original car. 2. After the car key is matched, the new key can be activated, and the lost key will become invalid immediately. 3. Duplicating car keys is relatively expensive, depending on the car model and brand. 4. Many cars are equipped with electronic key locks, which are mostly applied to ignition locks, further enhancing the functionality and anti-theft effect of the car's electronic anti-theft system. Electronic key locks can be divided into two categories: resistive electronic key locks and coded electronic key locks. The working principles of these two types of electronic key locks are exactly the same, both using a codec circuit.
17
0
Share

What are the differences between Cadillac ATS and XTS?

The main differences between ATS and XTS lie in their positioning. Below are the detailed differences between Cadillac ATS and XTS: 1. Difference one: Engine layout. The Cadillac ATS-L adopts a front-engine, rear-wheel-drive layout, while the XTS uses a front-engine, front-wheel-drive layout. 2. Difference two: Engine power. Both are equipped with a 2.0T engine, but the ATS-L has a maximum power output of 205KW and a maximum torque of 400N·m, whereas the XTS has a maximum power of 198KW and a maximum torque of 353N·m. 3. Difference three: Transmission. The ATS-L is equipped with an 8AT transmission, while the XTS comes with a 6AT transmission. 4. Difference four: Exterior and interior design. Since the ATS-L has not been updated after the 2017 model, its design style is relatively older, whereas the XTS features Cadillac's latest design language.
6
2
Share

What materials can 308 welding wire weld?

308 is a Cr19Ni10 stainless steel welding rod with titanium-type flux coating, suitable for both AC and DC welding. During welding, the flux coating exhibits characteristics of not turning red or cracking, and the weld metal possesses excellent mechanical properties and resistance to intergranular corrosion, making it particularly suitable for flat welding of thin plates. Additional information: 1. Z308 welding rod: Z308 is a cast iron welding rod with pure nickel core and strongly reducing graphite-type flux coating, generally used for repairing cast iron thin parts and machined surfaces, such as engine mounts, machine tool guide rails, gear seats, and other important gray cast iron components. 2. E308 welding rod: E308 is a stainless steel welding rod, belonging to the chromium-nickel stainless steel welding rod category, used for welding stainless steel materials. The stainless steel welding rod is a titanium-type flux-coated Cr19Ni10 stainless steel welding rod that can be used with both AC and DC. During welding, the flux coating does not turn red or crack, and the weld metal exhibits good mechanical properties and resistance to intergranular corrosion, making it particularly suitable for flat welding of thin plates.
18
4
Share

What is the difference between 22-cylinder and 30-cylinder?

The difference between 22-cylinder and 30-cylinder car air pumps lies in their inflation speed. The 30-cylinder model inflates faster than the 22-cylinder one. Slower inflation speeds make it more difficult to inflate larger vehicles. Details are as follows: Working principle of car air pumps: Car air pumps operate by drawing power from external or built-in batteries to run the motor. The motor generates power to draw in surrounding air, creating air pressure that opens the valve of the connecting device. The air pressure then enters the air cylinder. When inflating tires, the air pressure in the cylinder flows through the outlet hose into the tire's valve, using the pressure to open the valve core rubber ring and allow air to enter the tire. Requirements for selecting an air pump: Consider the power rating. Small cars can opt for low-power air pumps, which are cheaper and more energy-efficient. For accurate inflation data, precision is crucial. High-quality tire pressure gauges typically feature an embedded, integrated design to prevent impact and loosening that could affect measurement accuracy.
17
4
Share

What are the five driving modes of the GLC?

Mercedes-Benz GLC is the first all-new crossover model launched by Mercedes-Benz. The five driving modes of the GLC are: 1. E (Eco) Mode: Its function is to save fuel and energy, but the vehicle's power will be reduced, making it feel sluggish. The transmission always shifts to the highest gear as soon as possible, allowing 6th gear cruising at 60 km/h. 2. C (Comfort) Mode: This is the most commonly used mode. In this mode, balanced comfort is the GLC's greatest performance, offering a calm, smooth, and unhurried drive. The steering is light and precise, especially at low speeds. 3. S (Sport) Mode: In this mode, the transmission keeps the engine RPM above 2500, and the steering wheel immediately feels much tighter. 4. S+ (Sport+) Mode: Sport+ is more aggressive than Sport mode. 5. IN (Individual) Mode: Allows customization of powertrain and steering settings, such as combining Eco mode power with Sport mode steering.
16
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.