How to Open and Close the Fuel Tank Cap of the Lingpai?

What's the reason when the dashboard completely fails but the car can still be driven?

The reasons why the dashboard completely fails but the car can still be driven are: 1. The dashboard lighting is faulty or damaged; 2. The dashboard power supply wire is broken; 3. The dashboard power supply fuse is blown; 4. The dashboard motherboard is damaged or faulty; 5. The converter's fuse is faulty. The solutions for when the dashboard completely fails but the car can still be driven are: 1. Test whether functions like the horn are working; if they are not, it indicates a converter fuse issue; 2. Check the condition of the dashboard power supply fuse; if the fuse is blown, replace it. If the problem persists, visit the nearest 4S shop or auto repair shop for inspection.

17

5

Share

What do Audi 45 and 55 represent?

Audi 45 and 55 represent the horsepower of the engine. The larger the number, the greater the horsepower of the engine, and the better the performance. Generally, 45 represents the 2.0T high-power engine, while 55 represents the 3.0T engine. It can also be understood that the larger the number on the tail badge, the stronger the power. Taking the 2020 Audi A4L 45 TFSI quattro Premium Elegance model as an example: it is a medium-sized 4-door 5-seater sedan with a length, width, and height of 4851mm, 1847mm, and 1411mm respectively, a wheelbase of 2908mm, and equipped with a 7-speed dual-clutch transmission. The 2020 Audi A4L 45 TFSI quattro Premium Elegance model has a top speed of 240 km/h, a fuel tank capacity of 58 liters, a front-engine four-wheel-drive system, and uses 245/35R19 tire specifications.

16

1

Share

Why does the car shake like it's convulsing?

The reasons why the car shakes like it's convulsing are: 1. Ignition system issues: including faulty spark plugs, high-voltage wires, or ignition coils; 2. Aging engine components: vehicle shaking is also related to the aging of engine parts. If these parts fail, the vibrations will be transmitted to the steering wheel and the cabin, causing shaking at idle; 3. Severe engine carbon deposits, including a dirty throttle or excessive carbon buildup in the fuel injectors; 4. Unstable oil pressure. Solutions for a car shaking like it's convulsing include: 1. Check the oil pressure and replace the intake pressure sensor if necessary; 2. Clean the fuel system and check if the idle speed motor has carbon deposits, and clean it if necessary.

8

1

Share

What Are the Reasons for an Automatic Transmission Not Moving When in Gear?

Automatic transmission not moving when in gear can be caused by the following reasons: Torque Converter: The torque converter shaft is locked, causing the fuel injection pump to stop working. It must be replaced to resolve the issue. Lubricating Oil: The lubricating oil passage is blocked, leading to insufficient lubrication, which results in the planetary carrier burning out. Oil Pump Shaft: The oil pump shaft is broken, causing the oil pump to stop working or the differential to lack oil and burn out. Transmission: The transmission oil pan is damaged, causing all the transmission oil to leak out and leading to vehicle issues. The transmission valve body or solenoid valve is damaged and not functioning. Loose Linkage: The linkage or cable between the gear shift handle and the manual valve rocker arm is loose, keeping the manual valve in the neutral or parking position.

1

5

Share

How to Determine if the Oil Pressure Sensor is Faulty?

The methods to determine if the oil pressure sensor is faulty are: 1. After starting the vehicle, if the oil pressure warning light comes on, immediately turn off the engine and send it for repair as soon as possible; 2. Noticeable power loss. A damaged pressure sensor may cause insufficient lubrication in the engine, increasing friction within the cylinders and resulting in reduced power; 3. Using specialized diagnostic equipment to read the fault code "P01CA", which indicates that the oil pressure sensor voltage is above the upper limit. The oil pressure sensor in a car is a crucial device for monitoring the engine's oil pressure, and the data it detects helps ensure the normal operation of the engine.

20

4

Share

How to Install the Cruze VVT Pulley?

The installation method for the Cruze VVT pulley is as follows: 1. Use a clamp to secure the crankshaft pulley to prevent the crankshaft piston from springing back and locking the pulley; 2. Loosen the crankshaft pulley bolt with a wrench to facilitate the later installation of the chain; 3. Open the crankshaft pulley cover to allow the crankshaft gear to be inserted; 4. Align the colored part of the crankshaft gear with the crankshaft pulley, ensuring the position matches the corresponding mark; 5. Align the crankshaft pulley chain with the small round hole on the crankshaft pulley and secure the pulley top. Taking the Cruze 2018 320 Manual Pioneer Edition as an example: It is a compact 4-door 5-seater sedan under SAIC-GM Chevrolet, with dimensions of 4666mm in length, 1807mm in width, and 1460mm in height, a wheelbase of 2700mm, and a top speed of 185 km/h.

15

2

Share

How to Open and Close the Fuel Tank Cap of the Lingpai?

What's the reason when the dashboard completely fails but the car can still be driven?

What do Audi 45 and 55 represent?

Why does the car shake like it's convulsing?

What Are the Reasons for an Automatic Transmission Not Moving When in Gear?

How to Determine if the Oil Pressure Sensor is Faulty?

How to Install the Cruze VVT Pulley?

What does Audi RS mean?

How to adjust the timing of the wiper motor on an old Buick GL8?

How to Enable One-Touch Window Lift for the 2021 Sylphy?

Will the engine warning light come on if the fuel cap is not tightened properly?