How to Open a Wheel Clamp?

1 Answers
LeilaAnn
07/29/25 4:27pm
Wheel clamps can be opened by inserting the specialized key into the lock cylinder and turning it 90 degrees clockwise. Functions of car tires: 1. Transmit driving force, braking force, and steering force to enable vehicle operation; 2. Support vehicle load; 3. Reduce and absorb vibrations and impacts during driving. Car tire maintenance methods: 1. Regularly check tire pressure; 2. Remove debris from tire treads; 3. Inspect tire wear and replace them promptly based on wear condition; 4. Perform tire rotation to ensure even force distribution across all four tires and prevent excessive wear.
Was this review help?
12
5
Share
More Forum Discussions

What to Do About Worn Brake Pads?

Brake pads are consumable items and need to be replaced in a timely manner. Below is a detailed introduction to brake pads: 1. Introduction to brake pad wear: The replacement cycle for brake pads and brake discs is not fixed and depends on the vehicle's driving conditions, the frequency and force with which the driver presses the brake pedal. Generally, conventional brake pads should be replaced every 25,000 to 30,000 kilometers driven. 2. Brake pad wear replacement: Brake shoes consist of two parts: the iron backing plate and the friction material. It is essential to replace them with the original manufacturer's spare parts to ensure the best braking effect between the brake pads and discs, achieving minimal wear. After replacing the brake shoes, it is crucial to press the brake pedal several times to eliminate the gap between the shoes and the brake disc, preventing potential accidents.
15
5
Share

Can the Rearview Mirror Housing Be Replaced?

Can the rearview mirror housing be replaced? If only the housing is damaged and all other functions remain intact, there is no need to replace the entire assembly. Simply replacing the housing is sufficient, as auto parts stores sell individual rearview mirror housing components. Relevant details are as follows: 1. When installing the rearview mirror housing: It must be installed tightly without significant gaps. Otherwise, rainwater may seep through the gaps into the mirror's mechanism, leading to short circuits or damage. 2. Classification by installation location: (1) Interior rearview mirror: The interior rearview mirror is designed to allow the driver to confirm rear conditions without significantly shifting their forward line of sight. (2) Exterior rearview mirror: Passenger vehicles typically mount the exterior rearview mirror on the door. In Japan, some vehicles also mount them on the fender. (3) Undermirror: This mirror enables the driver to see areas beyond the front and rear wheels beneath the car's body from the driver's seat. It helps the driver check for people or obstacles near the wheels or the vehicle's sides when reversing or moving forward, preventing injuries, damage to objects, or harm to the vehicle.
13
1
Share

What are the effects of keeping the air conditioning on in the car all the time?

Keeping the air conditioning on while the car is stationary has an impact on the vehicle, mainly affecting the engine slightly, which can easily lead to carbon deposits forming at the exhaust pipe tailpipe and also increases fuel consumption. Relevant information is as follows: 1. Air Conditioning: Car air conditioning refers to the air conditioning device installed in the car, which can cool, heat, ventilate, and purify the air inside the cabin, providing a comfortable environment for passengers, reducing driver fatigue, and improving driving safety. 2. Principle: When the car air conditioning is cooling, the compressor clutch engages, and the engine drives the compressor to operate. The compressor continuously compresses the refrigerant and delivers it to the evaporator. The cooled evaporator can then cool the air blown by the blower, allowing the car air conditioning vents to blow cold air. When the car air conditioning is heating, the high-temperature antifreeze from the engine enters the heater core, and the air blown by the blower may pass through the heater core, allowing the car air conditioning vents to blow warm air.
10
4
Share

What is the meaning of the marking inside the red circle?

The marking inside the red circle indicates a bay-style bus stop, which can also be understood as a no-parking zone. It refers to a public transport stop that partially widens the roadway on the outer side of the traffic lane—this is called a 'bay-style bus stop.' Its basic form involves the road surface cutting into the sidewalk by 3 meters, forming a parking bay over 90 meters in length. The differences between bay-style stops and direct stops are as follows: 1. Direct stops: Vehicles stop directly within the traffic lane, occupying the driving lane when parked. These are commonly used on urban arterial roads, major roads, and branch roads with dedicated bus lanes. 2. Bay-style stops: Typically used on urban arterial roads without dedicated bus lanes, main roads with bidirectional four-lane configurations, and some secondary roads with high traffic volume.
11
1
Share

What are the differences between the Geely Emgrand S and GS?

Emgrand S and Emgrand GS are both SUV models under the Geely brand. The main differences between the Emgrand S and Emgrand GS are as follows: 1. Price comparison: The Emgrand S is slightly more expensive than the Emgrand GS. 2. Product positioning comparison: Although the Emgrand S and Emgrand GS are similar in many aspects of the vehicle model, the Emgrand S places more emphasis on brand upgrades in terms of youthful sportiness, fashion sense, and technological appeal. Relevant details are as follows: 1. Powertrain: The new Geely Emgrand is equipped with a 1.3T GeTec DVVT turbocharged engine, featuring front-wheel drive, a maximum power of 98kW, turbo engagement at 1800 rpm, and a peak torque output of 185Nm at 2000 rpm. 2. Brand: Emgrand adheres to the brand proposition of 'Excellence, Stability, and Prestige,' representing Geely's development direction in safety, energy efficiency, and environmental protection.
18
3
Share

How many points can a novice driver's license be deducted within one year?

New drivers can have a maximum of 11 points deducted in their first year. Additional information: 1. Article 74 of the 'Regulations on the Application and Use of Motor Vehicle Driver's Licenses' stipulates that the first 12 months after a motor vehicle driver initially obtains a driver's license or adds a permitted driving type is the probationary period. If a driver newly obtains a license for large buses, tractors, city buses, medium-sized buses, or large trucks, they must take a test on road traffic safety laws and regulations, safe and civilized driving, emergency handling, and other knowledge within 30 days after the probationary period ends, and receive no less than half an hour of traffic accident case warning education. If driving a motor vehicle during the probationary period, a uniform-style probationary sign must be affixed or hung at the rear of the vehicle. 2. Article 79 of the 'Regulations on the Application and Use of Motor Vehicle Driver's Licenses' states that if a motor vehicle driver accumulates 12 points for traffic safety violations during the probationary period, the driving qualification for the probationary driving type will be revoked. If the revoked driving qualification is not the highest permitted driving type, the driving qualification for the highest permitted driving type shall also be revoked in accordance with the first paragraph of Article 78.
8
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.