How to Open a Geely Key Fob to Replace the Battery?
3 Answers
Here are the steps to replace the battery in a Geely key fob: 1. Remove the mechanical key and locate the small button on the top of the remote key. 2. Select a suitable screwdriver that fits precisely into the small button slot. This ensures easier and quicker opening of the key compartment without causing any cosmetic damage. 3. Insert a flat-head screwdriver into the small button slot on the top of the Geely car key and twist it. Try to open it directly from the front to avoid the casing touching other parts. 4. After opening the key compartment, you will see the battery—remove and replace it. 5. Insert the new battery, close the battery compartment, and press the cover firmly to complete the battery replacement.
Changing the battery in my Geely key was quite simple, just a few steps to get it done. Most Geely car keys have a similar design, with a small groove or button on the back. You can gently pry open the cover—avoid using metal tools to prevent scratching the shell; I usually use my fingernail or a plastic card. Inside, you'll find a small coin-cell battery, typically a CR2032. You can note this down and buy a new one at a supermarket or hardware store. When replacing it, pay attention to the battery's orientation—remove the old one and discard it, then insert the new one firmly. When reassembling the cover, listen for a click to ensure it's securely fastened. After replacing the battery, it's best to test the key buttons to see if the light works or if the remote door response is normal, just to avoid any contact issues. The whole process takes about five minutes, saving you the cost and time of visiting a dealership. I've done it several times myself without any issues—just don't use excessive force. Also, the key battery usually lasts one to two years. If you notice the remote range shortening or the buttons becoming unresponsive, it's time to replace it promptly.
As someone who enjoys tinkering with car accessories, my experience of replacing the battery in a Geely key fob was quite fun. The key's construction is actually quite intuitive, and finding the right spot is key. Typically, Geely key fobs have a plastic shell that snaps together, with a fine seam or indentation on the back cover. I used a small screwdriver or a phone pry tool to gently push along the seam and slowly pry it open, being careful not to rush to avoid cracking it. Inside, there's a round battery, usually a CR2032 model with 3 volts—make sure not to buy the wrong type to avoid damaging the circuit. After removing the old battery, I cleaned out any dust or grime. Before inserting the new battery, I confirmed the electrode direction matched the positive/negative markings and pressed it firmly in place. When putting the cover back on, I aligned the clips and applied a bit of pressure to secure it, then tested the remote functions to ensure they worked properly. I recommend checking your key fob battery life regularly to avoid the awkward situation of being unable to unlock your car when parked. The whole process is very DIY and safe, and it's quite rewarding to do it yourself. The battery only costs a few bucks, and once replaced, it lasts a long time, saving a lot compared to getting it done elsewhere.
