How to Open a Car's Fuel Tank Cap?

How to apply for ETC for corporate vehicles?

To apply for ETC for corporate vehicles, you need to bring the original vehicle license, drive the application vehicle to the bank branch or ETC processing institution, fill out the Express Electronic Tag and Express Card application form, submit the original vehicle license and other supporting documents, then pay the fee and receive the invoice. After completion, install the Express Electronic Tag. The ETC installation process is as follows: Upon receiving the device, first check if the ETC card and electronic tag (OBU) are damaged. Press the anti-tamper button on the back of the OBU; the red light will briefly illuminate, and the OLED screen will display 'Tag Invalid' or 'Please Insert Card,' indicating the device is functioning properly. Clean the front windshield, ensuring the glass surface is smooth, clean, and dry. Then peel off the adhesive backing of the OBU and attach it to the installation position. Press firmly for 2-3 minutes to remove any air bubbles. Insert the ETC card with the front facing the driver and the back facing the windshield, ensuring the chip is inserted into the OBU device.

9

4

Share

Does Car Insurance Cover Spontaneous Combustion?

Spontaneous combustion loss insurance for vehicles is an additional coverage to the vehicle damage insurance, and only vehicles insured with vehicle damage insurance can purchase this coverage. The following is relevant information about compensation: 1. Compensation Amount: For insured motor vehicles that catch fire due to faults in the vehicle's electrical system, wiring, fuel supply system, or due to the nature of the cargo being transported, resulting in loss to the insured vehicle, as well as necessary and reasonable rescue expenses incurred by the insured to reduce vehicle loss during an accident covered by this insurance, the insurance company will compensate for the actual loss of the vehicle within the insurance amount specified in the policy. In the event of a total loss, compensation will be made within the insurance amount specified in the policy based on the actual value of the vehicle at the time of the accident. The absolute deductible rate for this insurance is 20%. 2. Non-Compensable Losses: The insurance company will not be liable for compensation if the loss is caused by the insured's violation of vehicle safety operation rules, such as manual direct fuel supply or open flame baking, or if the spontaneous combustion only results in loss to the electrical system, wiring, fuel supply system, or the cargo itself, as well as losses caused by the insured's intentional actions.

17

2

Share

What is the difference between unibody and body-on-frame structures?

The differences between unibody and body-on-frame structures include structural differences, maintenance differences, collision differences, chassis and body connection differences, body weight differences, and ride comfort differences. Structural differences: In unibody vehicles, all components are directly installed on the body; in body-on-frame vehicles, components are installed on the chassis frame, and the body does not bear the weight of vehicle components. Maintenance differences: Unibody structures are more complex to repair; body-on-frame structures make it easier to replace parts or perform maintenance. Collision differences: In a collision, the front and rear frames of a unibody structure will crumple to absorb impact forces and protect occupants; body-on-frame structures, due to the presence of the chassis frame, cannot crumple like unibody structures to absorb impact forces. Chassis and body connection differences: In body-on-frame structures, the chassis and body are not integrated, and the vehicle can still operate normally if the body is separated from the chassis; in unibody structures, the body and chassis are integrated and cannot be completely separated. Body weight differences: Body-on-frame structures are heavier, have a higher center of gravity, and are less conducive to vehicle handling; unibody structures are lighter, have a lower center of gravity, and are more conducive to vehicle handling. Ride comfort differences: Body-on-frame structures are heavier, have a relatively higher center of gravity, and offer relatively poorer ride comfort; unibody structures are relatively lighter, have a lower center of gravity, offer higher interior space utilization, and provide relatively better ride comfort. The most notable feature of a body-on-frame structure is the presence of an independent frame. The body is elastically mounted on the frame with springs or rubber pads, and components such as the engine, transmission, and suspension system are installed on the frame. The frame bears the main load, while the body only carries the weight of passengers and luggage. This structure is mainly used in trucks, buses, off-road vehicles, and some high-end sedans (e.g., Mercedes-Benz S600). The most notable feature of a unibody structure is the absence of a frame. The body is formed by welding components such as the floor, skeleton, and inner and outer panels into a rigid frame structure. Components such as the engine, transmission, and suspension system are installed on the body, and the entire body structure participates in load-bearing, hence the name unibody. This structure is mainly used in most sedans, urban SUVs, and some large buses.

14

5

Share

What is the Difference Between Cruise Control and Adaptive Cruise Control?

The differences between cruise control and adaptive cruise control lie in their applicable road conditions, functions, principles, nature, and characteristics. The specific details are as follows: Applicable Road Conditions: Cruise control is suitable for good road conditions, such as highways and roads with light traffic; adaptive cruise control is suitable for highway conditions and can also be used in urban road conditions. Function Differences: In emergency situations, cruise control relies solely on the driver's manual operation; adaptive cruise control can maintain the vehicle's longitudinal movement and, in the event of a collision risk, will alert the driver and actively intervene with braking. Vehicles are equipped with cruise speed control buttons, visible on the steering wheel, allowing the driver to control the distance from the vehicle ahead. If the driver needs to rest, they should place their foot on the edge to the right of the accelerator pedal, making it difficult to accidentally press the accelerator and achieve sudden acceleration, thus enhancing safety. Differences in Principle, Nature, and Characteristics: Once the speed is set, the cruise control system maintains that speed. However, this poses a significant safety hazard, as cruise control will continue at the set speed regardless of the situation and will not automatically slow down in emergencies. In contrast, the adaptive cruise control system can set a safe distance and will adaptively reduce the vehicle's speed when a potential hazard is detected, eliminating safety risks. Overall, the adaptive cruise control system is more intelligent, safer, and more user-friendly. Cruise control, abbreviated as CCS, can be equipped in both manual and automatic transmission vehicles. It allows the vehicle to travel at the speed set by the driver, eliminating the need to press the accelerator pedal. Adaptive cruise control is more intelligent, enabling the vehicle to judge braking and adjust speed based on road conditions. Cruise control is generally usable at speeds between 30 km/h and 150 km/h, depending on the vehicle model, but this feature is not suitable or safe in current road traffic conditions. Adaptive cruise control (ACC) is only available in automatic transmission vehicles because it does not maintain a constant speed; the speed changes dynamically, requiring an automatic transmission to accommodate this feature. Adaptive cruise control is divided into: standard adaptive cruise control (simple speed control) and full-speed range adaptive cruise control (intelligent driving). Adaptive cruise control is semi-autonomous driving, where the vehicle's speed is set to a fixed value. When there is a vehicle ahead, the speed will appropriately decrease, and when overtaking, the vehicle will accelerate back to the preset speed. It can also include a follow-up system (this feature is based on full-speed range adaptive cruise control and requires vehicles with L2-level autonomous driving capabilities). Adaptive cruise control is more advanced than cruise control, incorporating a digital information processor, radar sensor, and control module, making it more intelligent.

8

0

Share

Should You Use Internal or External Air Circulation When Turning on the Heater in Winter?

When using the heater in winter, it is recommended to use internal circulation for short trips and external circulation for long trips. Below are detailed explanations of internal and external circulation: 1. Internal circulation system: The air exchange channel between the inside and outside of the car is closed. When the fan is off, the airflow inside the car does not circulate. When the fan is on, the incoming airflow is only drawn from inside the car, creating an internal airflow cycle. 2. External circulation system: External circulation mode uses the fan to draw air from outside the car into the cabin. The air blown by the fan comes from outside the car. Even if the fan is off, airflow is still drawn into the car while driving, replenishing fresh air inside the cabin.

6

5

Share

What is the fuel consumption of the Trumpchi M8?

The comprehensive fuel consumption of the GM8 is 10.1L/100km. The dimensions of the GAC Trumpchi GM8 are: length 5066mm, width 1923mm, height 1822mm, with a wheelbase of 3000mm. Here are the specific details of the GAC Trumpchi GM8: 1. Dimensions: The GAC Trumpchi GM8 is an MPV with a fuel tank capacity of 68 liters and a curb weight of 2002kg. 2. Powertrain: The GAC Trumpchi GM8 features a MacPherson independent front suspension and a multi-link independent rear suspension. It is equipped with a 2.0L turbocharged engine, delivering a maximum horsepower of 201PS, a maximum torque of 320Nm, and a maximum power of 148kW, paired with a 6-speed automatic transmission.

12

4

Share

How to Open a Car's Fuel Tank Cap?

How to apply for ETC for corporate vehicles?

Does Car Insurance Cover Spontaneous Combustion?

What is the difference between unibody and body-on-frame structures?

What is the Difference Between Cruise Control and Adaptive Cruise Control?

Should You Use Internal or External Air Circulation When Turning on the Heater in Winter?

What is the fuel consumption of the Trumpchi M8?

How to Remove and Install a Tire Equipped with a Tire Pressure Monitoring Device?

What is the emission standard of the Geely Emgrand?

Is It Safe to Have a Crack on the Windshield?

What are the reasons for vehicle stuttering during driving?