How to One-Touch Window Roll-Up in BMW 5 Series?

2 Answers
DiBraxton
07/28/25 8:55pm
BMW 5 Series one-touch window control method: You can operate the one-touch window function using the lock and unlock buttons on the key fob. Hold the lock button for more than 3 seconds to roll up and close all windows simultaneously; similarly, hold the unlock button for about 3 seconds to synchronously lower all four windows. The BMW 5 Series is a premium sedan featuring a front double-wishbone independent suspension and rear multi-link independent suspension across all models. Powering the 5 Series is a newly developed six-cylinder engine paired with an 8-speed automatic transmission. In terms of dimensions, the BMW 5 Series measures 5106mm in length, 1868mm in width, and 1500mm in height, with a wheelbase of 3150mm.
Was this review help?
8
4
Share
KateDella
08/12/25 1:37am
Having driven the BMW 5 Series for so many years, I'm most familiar with its one-touch window control feature. On the driver's door handle, there's a button marked 'AUTO'. Gently pull it upward and hold for about two seconds without releasing – you'll hear a click, and all windows will automatically close. It's incredibly handy when you encounter rain or forget to close windows with the AC on in summer. But a reminder: be careful not to pinch your fingers when using this function. The system does have anti-pinch protection, but it's best not to test it by blocking the windows. Another practical tip: if you've just had window tinting applied, the technician should advise you not to use one-touch window closing for 3 days, as the new film may curl at the edges. If you turn off the engine and realize the windows are open, simply press and hold the lock button on the key fob for three seconds, and all windows will close automatically – a perfect trick for the forgetful!
Was this review help?
3
1
Share
Expand All
More Forum Discussions

Is Chery a Domestic or Joint Venture Car?

Chery is a domestic car, and its models include: Tiggo 8, Tiggo 5x, Tiggo 3x, Tiggo 3, Arrizo 5e, etc. Taking the 2020 Tiggo 8 as an example, its body dimensions are: 4700mm in length, 1860mm in width, 1746mm in height, with a wheelbase of 2710mm and a trunk capacity of 889l. The 2020 Tiggo 8 features a MacPherson independent front suspension and a multi-link independent rear suspension. It is equipped with a 1.5L turbocharged engine, delivering a maximum horsepower of 156ps, a maximum power of 115kw, and a maximum torque of 230nm, paired with a 6-speed manual transmission.
10
3
Share

How to Install Car Bumper Guards?

First, clean the area where you need to install the bumper guard with a towel. Peel off a small portion of the adhesive strip inside the bumper guard to better secure its position. Then, attach the adhesive side of the bumper guard to the desired installation location. While pressing the bumper guard along the direction, peel off the remaining double-sided tape. Finally, trim any excess protruding bumper guard to complete the installation. Are you referring to bumper guards on the front and rear bumpers or those on the doors? Bumper guards are essentially decorative strips. Those on the front and rear bumpers are usually attached with 3M double-sided tape, while door bumper guards may be adhesive, clip-on, or secured with screws from the inside of the door. First, clean the area where you need to install the bumper guard with a towel. Peel off a small portion of the adhesive strip inside the bumper guard to better secure its position. Then, attach the adhesive side of the bumper guard to the desired installation location. While pressing the bumper guard along the direction, peel off the remaining double-sided tape. Finally, trim any excess protruding bumper guard to complete the installation.
14
0
Share

What to Do When the Engine Yellow Light on the Car Dashboard Comes On?

When the engine yellow light appears on the car dashboard, it indicates that there may be an issue with the engine. There are two scenarios: if, when the power is turned on, all warning lights including the engine fault light illuminate and then turn off, this is normal. However, if the light remains on after the car is started, it signifies a fault in the vehicle. The engine yellow light is often related to fuel quality or sensor issues. Fuel quality concerns can involve both gasoline and engine oil. Gasoline comes in specific grades, and owners should use the grade recommended by the manufacturer. Similarly, engine oil varies between semi-synthetic and fully synthetic, and it should also be added according to the manufacturer's specifications. If the owner fails to follow these guidelines, prolonged use can lead to engine wear, triggering the fault light.
3
0
Share

What are the tips for U-turns and turns?

The tips for U-turns and turns are: 1. When making a U-turn, look at the right rearview mirror. Once you can see the intersection below the mirror, turn the steering wheel all the way, and straighten it when the car body is parallel to the road. 2. When turning, if you need to make a sharp turn, try to turn the steering wheel all the way, and then slowly straighten it after completing the turn. For wide turns, gradually turn the steering wheel. When making a sharp turn, if you feel you can't complete it in one go, first turn the steering wheel slightly in the opposite direction. This approach can extend the turning path, ensuring the car body levels out sooner and reducing the chance of scraping. If it still doesn't work, turn the steering wheel slightly in the opposite direction, reverse a bit, and then turn again.
12
1
Share

What to Do If a Car Without a Spare Tire Gets a Flat?

If a car without a spare tire gets a flat while driving, it is important to stabilize the steering wheel and slowly come to a stop. Then, set up a warning triangle behind the vehicle and call your insurance company or roadside assistance to explain the lack of a spare tire and arrange for a tow truck. The causes of tire wear are as follows: Excessive wear on both sides: The main reasons are insufficient inflation or prolonged overloading. When the tire is underinflated or overloaded, the contact area with the ground increases, causing the edges of the tire to wear prematurely. Excessive wear on one side: The main reason is misaligned front-wheel positioning. When the camber angle is too large, the outer edge of the tire wears prematurely. If the camber angle is too small or nonexistent, the inner edge of the tire wears prematurely. Sawtooth wear on the tread: The main reasons are improper front-wheel alignment or issues with the front suspension system, such as loose ball joints, which cause the normally rolling wheel to slip or continuously change alignment, resulting in sawtooth wear on the tire.
17
5
Share

What are the warning signs of brake failure?

Brake failure warning signs include: 1. A feeling of weakness when pressing the brake; 2. The vehicle pulls to one side when braking; 3. The brake pedal feels soft; 4. Unusual noises occur when braking; 5. The brake pedal does not return to its original position after being pressed and there is no resistance felt when pressing it. Solutions for brake failure are: 1. Release the accelerator pedal; 2. Shift to manual mode and manually downshift from high to low gears; 3. When applying the handbrake, hold the release button and pull the handbrake intermittently, not all the way; 4. After the vehicle stops, shift into park. The brake system consists of a vacuum booster pump, master cylinder, wheel cylinder, brake pads, and brake discs.
5
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.