How to Obtain the Vehicle Environmental Protection Label?

2 Answers
ElijahMarie
07/29/25 2:34am
Steps to obtain the vehicle environmental protection label are as follows: 1. Visit the local vehicle exhaust emission testing department to have your vehicle's exhaust measured. 2. Take the exhaust emission test pass certificate to the environmental protection label issuance office at the vehicle management office to apply for the environmental protection label. You need to bring the original copies of three documents: the vehicle license, the vehicle registration certificate, and the owner's ID card. Submit these to the staff to receive the vehicle environmental protection label. 3. Note that the label should be affixed to the upper right corner of the vehicle's windshield. It is recommended to use a static cling sticker for easy removal during re-inspection without leaving residue on the glass. 4. If the vehicle fails the exhaust emission test, it should be repaired and then re-tested at the original testing facility. Only after passing the re-test can you apply for the environmental protection label.
Was this review help?
20
3
Share
JourneyDella
08/12/25 6:30am
I remember it was quite simple to help a friend with this last year. Nowadays, most cities issue the environmental label directly through the annual inspection. You drive to the testing station for the tailpipe emissions test, and if it passes, you can get the paper label on the spot. In some places, it’s directly synchronized to the electronic version in the Traffic Management 12123 App. For new cars, it’s even more convenient—just bring the purchase invoice, certificate of conformity, and other materials when registering the license plate at the vehicle management office, and they’ll give you the environmental label along with the vehicle license. Pay special attention that some new energy vehicles are exempt from inspection and can receive the label directly, so don’t make a wasted trip. If you lose the old label and need a replacement, many government service centers now have self-service kiosks where you can print it by scanning your ID card.
Was this review help?
2
5
Share
Expand All
More Forum Discussions

How to Disassemble a Cruze Key?

Press the button on the side of the Cruze remote key to pull out the mechanical key from the housing. Here are the specific steps to replace the Cruze key battery: 1. First, locate the switch on the back of the key, grab the top part and pull it outward. After removing the internal metal mechanical key, you will see a small groove. 2. Use a flathead screwdriver or other tool to pry open the key cover along the groove. Once a gap appears, you can manually open it. 3. After opening the key cover, remove the old battery and replace it with a new one, paying attention to the battery polarity. 4. Reattach the key cover and reinsert the mechanical key.
1
3
Share

Can I Renew an Expired Driver's License?

Whether an expired driver's license can be renewed depends on the specific expiration period. The regulations for driver's license renewal are as follows: If the license has been expired for less than one year, it can be renewed normally; if it has been expired for more than one year but less than three years, the license will be canceled, but it can be renewed by passing the subject one test; if it has been expired for more than three years, the license will become invalid and cannot be renewed. Renewal and inspection must meet the following conditions: The holder of a large passenger vehicle, tractor, city bus, medium-sized passenger vehicle, or large truck driver's license has no demerit points in the current scoring cycle, or the holder of other types of driver's licenses has not accumulated 12 demerit points in the current scoring cycle; The holder of a large passenger vehicle, tractor, city bus, medium-sized passenger vehicle, or large truck driver's license has demerit points in the current scoring cycle, or the holder of other types of driver's licenses has been involved in a traffic accident resulting in death and bears equal or greater responsibility without having their driver's license revoked, and has participated in the inspection education; The applicant has no pending road traffic safety violations or traffic accidents; The applicant's physical condition meets the driving permit requirements; The driver's license is not legally seized, detained, suspended, revoked, canceled, or invalidated.
14
4
Share

Symptoms of a Faulty Fan Clutch in a Heavy Truck?

Heavy truck fan clutch failure can cause excessive or insufficient airflow. Below are some tips for driving near heavy trucks: 1. Avoid truck blind spots: Trucks have large blind areas. During normal driving when a truck occupies the center lane and slower vehicles block the fast lane, attempting to overtake from the truck's right side often leads to accidents. 2. Dangers of truck turns: A special term called 'off-tracking' describes the difference between paths of a truck's front and rear wheels during turns. If passenger vehicles remain in this zone, truck drivers cannot see them. Maintain distance immediately.
20
1
Share

Will U-turns on Highways Definitely Be Captured by Cameras?

U-turns on highways will definitely be captured by surveillance cameras, as highways are now under full monitoring coverage. The consequences are severe, including a 12-point deduction on the driver's license and a fine. Prohibited U-turn situations: U-turns are prohibited at crosswalks: U-turns are not allowed at crosswalks. If at an intersection where U-turns are permitted, drivers must cross the crosswalk before making the turn and should not perform the U-turn on the crosswalk. U-turns are prohibited when there is no left-turn lane: Even in the leftmost lane, if there is no sign permitting left turns, U-turns are not allowed. U-turns are prohibited from the second left-turn lane: When a vehicle is in the second left-turn lane, it cannot make a U-turn. In the absence of any directional signs, U-turns are only permitted from the innermost left-turn lane. U-turns are prohibited at solid yellow lines: U-turns are not allowed at solid yellow lines. Even if there is a sign permitting U-turns, drivers must wait for the green light and cross the stop line to make the turn. U-turns are prohibited on highways: Crossing the central divider to make a U-turn on a highway is illegal and will result in a fine and a 12-point deduction. If you miss an exit on the highway, continue to the next exit to leave the highway; never attempt an illegal U-turn out of misplaced confidence.
19
2
Share

How to Drive a New Santana During the Break-in Period?

During the break-in period of a new Santana, the following aspects should be noted: 1. Warm up before starting. For fuel-injected cars, turn the key to the second position and wait for 5-10 seconds before starting the engine. 2. Avoid high-speed driving. New cars have speed limits during the initial driving phase, typically 40-70 km/h for domestic vehicles. The engine speed during the break-in period should strictly be kept between 2000 to 4000 rpm. 3. Avoid overloading. Running a new car at full capacity can damage the components. 4. Do not remove the speed limiter prematurely. The speed limiter is a throttle device installed between the carburetor and the intake pipe. Drivers should not remove it in advance but should wait until the initial 1000 km is completed and combine it with the initial maintenance. 5. Avoid long-distance trips. Long trips in a new car will prolong the engine's continuous operation time, increasing component wear. 6. Avoid emergency braking. Emergency braking not only shocks the braking system during the break-in period but also increases the impact load on the chassis and engine. Therefore, avoid emergency braking within the first 300 km of driving. 7. Shift gears promptly. Shift gears timely and appropriately to avoid driving at high gears with low rpm or low gears with high rpm. 8. Use high-quality gasoline whenever possible. The engine oil used in a new car should not be of a lower grade than the manufacturer's specified standard.
2
1
Share

Where is BYD's manufacturing plant located?

BYD Auto Co., Ltd. has production bases in Xi'an, Shanghai, Guangdong, Beijing, Hangzhou, Tianjin and other locations. Here is more information about BYD: 1. BYD is a Chinese automotive brand founded in 1995, primarily producing commercial vehicles, passenger cars, and batteries. 2. Representative models of BYD include traditional high-quality fuel vehicles such as the F3, F3R, F6, F0, G3, G3R, L3/G6, and Surui, the S8 sports hardtop convertible, the premium SUV model S6 and MPV model M6, as well as globally leading models like the F3DM and F6DM dual-mode electric vehicles and the pure electric vehicle E6.
3
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.