How to Obtain the Physical Condition Certificate Required for Driver's License Renewal?

2 Answers
MacIsaac
07/29/25 3:55am
Method to obtain the physical condition certificate required for driver's license renewal: Generally, the vehicle management office can conduct the physical examination. If the vehicle management office does not provide the physical examination service, you should go to a medical institution at or above the county level for the examination and request them to issue a certificate confirming your suitability for driving. Below is an introduction to the driver's license physical examination: 1. Examination requirements: For a C1 driver's license, the height must be above 150CM, the vision of both eyes must be above 4.9, and there should be no red-green color blindness. The hearing test requires that each ear can distinguish the direction of the sound source when placed 50 centimeters away from the tuning fork. Each hand must have three healthy fingers with normal motor function, the right lower limb must have normal motor function, and the trunk and neck must have normal movement. 2. Materials to prepare: For the driver's license physical examination, you need to prepare your ID card and a recent one-inch color photo with a white background. Some driving schools/vehicle management offices may require students to take photos on-site.
Was this review help?
20
3
Share
EloiseFitz
08/12/25 7:42am
I just renewed my driver's license and completed the physical examination last month, and the process was quite straightforward. You can simply go to the hospital or medical check-up point designated by the DMV (Department of Motor Vehicles), usually without an appointment—just bring your ID card. The examination includes tests for vision, hearing, and limb mobility, among others. The doctor will issue a report on the spot, which becomes valid once stamped. You can then submit it to the DMV for license renewal. The entire process takes less than half an hour and doesn’t cost much, but make sure you go to an approved location, as regular hospitals might not be recognized. This is to ensure driving safety and prevent risks related to fatigue or illness. I think regular health check-ups are beneficial for oneself, and renewing the license serves as a reminder to maintain healthy habits. If there’s any decline in vision or other health issues, early detection and treatment are possible. Remember to check the local DMV’s official website for designated locations—it’ll make things more convenient.
Was this review help?
16
4
Share
Expand All
More Forum Discussions

What does the car door button mean?

door button in a car refers to the door. Different positions indicate different meanings, as follows: 1. The door button inside the car on the sunroof is used to open or close the sunroof. 2. On the front panel of the car, it is the interior reading light. Press to unlock the car, and the light turns on; after locking the car, the light turns off. Additional information is as follows: 1. Press the door button, then unlock the car, open the door, sit in the car, and after closing the door, the interior reading light will turn on. 2. Unlock the car, and the light will turn on. After a certain period, without pulling the handle, lock the car, and the light will turn off.
16
0
Share

What are the advantages and disadvantages of aluminum alloy car bodies?

Advantages and disadvantages of aluminum alloy car bodies are: 1. The advantages of aluminum alloy include light weight, strong oxidation resistance, and high plasticity. It can be cold-formed and processed, and slightly deformed frames can be easily restored to their original shape. 2. Aluminum alloy car bodies are more expensive. Compared to steel car bodies, aluminum alloy bodies are more brittle and difficult to repair through sheet metal and painting after collisions, resulting in very high maintenance costs. 3. Due to low hardness and poor wear resistance, parts are more prone to wear and tear. It is not suitable for frequently moving parts. 4. The excessive plasticity of aluminum alloy means it cannot provide better protection for occupants in the event of an accident.
17
1
Share

What is the reason why the Focus does not move when reversing?

Here are the reasons why the Focus does not move when reversing: 1. The gear is not fully engaged: It may be because the gear is not actually engaged, or because the vehicle's handbrake is not released, or because the synchronizer in the transmission is stuck. First, check if the gear is fully engaged. If there are no operational issues, it may need to be inspected. 2. Fault issues: The problem could be due to a leak in the reverse gear oil circuit, a fault in the reverse gear and high gear clutch, or an issue with the brake. When encountering such problems, it is best to send the vehicle for inspection immediately to minimize damage to the transmission. Normally, when shifting into reverse gear, it is important to ensure the vehicle is completely stopped before engaging reverse gear, otherwise it can easily cause the vehicle to shake after shifting into reverse.
11
3
Share

Which car brand has a pentagram logo?

The pentagram logo represents Jianghuai Automobile (JAC). Jianghuai Automobile offers a variety of models including MPVs, SUVs, and sedans. Among them, the JAC Refine S3 is a compact SUV with a wheelbase of 2560 mm and dimensions of 4345 mm in length, 1765 mm in width, and 1640 mm in height. In terms of powertrain, the JAC Refine S3 is equipped with two engines: a 1.5-liter naturally aspirated engine delivering 113 horsepower and 146 Nm of maximum torque, and a 1.6-liter naturally aspirated engine producing 120 horsepower and 150 Nm of maximum torque.
7
0
Share

How Long Can You Drive When the Oil Warning Light Comes On?

When the oil warning light comes on, you can drive for a maximum of 60 kilometers. Insufficient engine oil can cause mechanical damage to the engine. In chain-driven engines, the timing chain is guided by rails, which are tensioned by hydraulic cylinders powered by pressurized oil. The pressure is proportional to the engine speed. There are three scenarios for oil pressure warnings: 1. The warning appears during engine startup and disappears shortly after normal startup. 2. High-temperature warning, where the alert does not appear during startup but occurs during normal or high-speed operation. 3. Continuous warning, where the alert persists from startup through operation. Oil pressure warnings are not only related to the quality of the lubricating oil but also closely tied to the engine's condition. Factors such as the car's age, mileage, clearance size, and the working condition of the oil pump and auxiliary systems must all be thoroughly inspected, analyzed, and evaluated.
17
1
Share

How Long Can the Annual Vehicle Inspection Be Delayed?

Vehicle annual inspection can be done in advance but not postponed. If the inspection is overdue, the vehicle owner will be fined 200 yuan and receive 3 penalty points by the traffic police department. The consequences of overdue annual inspection are as follows: 1. The traffic police have the authority to impound the vehicle, impose fines, and deduct points. If an uninspected vehicle is found on the road, the traffic police department will temporarily seize the vehicle and, according to the "Road Traffic Safety Law of the People's Republic of China," impose a fine of up to 200 yuan and deduct 3 points from the driver's license. 2. Insurance will not cover accidents. Some people may skip the annual inspection to avoid paying vehicle and vessel tax or compulsory traffic insurance. According to the relevant provisions of the "Road Traffic Safety Law," if an uninspected vehicle is involved in a traffic accident, the insurance company has the right to refuse any compensation.
19
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.