···
Log in / Register

How to Obtain the New Vehicle Inspection Sticker?

1Answers
MacEmmett
07/29/2025, 09:45:50 AM

Methods to obtain the new vehicle inspection sticker: Go to the local vehicle management office to receive it. After the vehicle inspection at the vehicle management office, they will issue the inspection sticker. Before the inspection, make sure to bring the vehicle registration certificate, a copy of the compulsory traffic insurance policy, and the owner's ID card. When purchasing compulsory traffic insurance for a new car, you can directly use the copy of the compulsory traffic insurance to apply for the exemption inspection procedure. The compulsory traffic insurance will include the record of the vehicle and vessel tax. Do not leave the original copy with the vehicle management office, as the original is needed for vehicle insurance claims. Vehicle annual inspection refers to the annual inspection of vehicles that have already obtained formal license plates and registration certificates, conducted according to the technical conditions for the safe operation of motor vehicles. The purpose is to check the technical condition of the vehicle, strengthen vehicle maintenance, ensure the vehicle is in good condition, and guarantee driving safety.

Was this review help?
112
Share
More Q&A

What happens when a car's steering knuckle is deformed?

Car steering knuckle refers to the steering wheel. If the steering wheel is deformed or damaged, it will reduce the car's stability, cause slippage between the tire and the ground, and prevent the wheel from automatically returning to the correct position, leading to wheel misalignment. The steering knuckle has a complex shape, combining the structural features of four types of components: shafts, sleeves, rings, and fork brackets. It mainly consists of three parts: the supporting journal, the flange, and the fork bracket. Here is additional information: Symptoms of slight deformation in a car's steering knuckle include: Deformation of the steering knuckle affects the car's stability, making it difficult to control the direction. Deformation can also cause uneven tire wear, and if detected, it should be replaced promptly. If the steering knuckle is damaged, it can lead to slippage between the tire and the ground, shortening the tire's lifespan, and preventing the wheel from automatically returning to the correct position, resulting in wheel misalignment.
113
Share

Does Car Icing Affect the Paint?

Long-term icing on a car can affect the paint. Precautions for washing the car after snow: It is important to wash the car promptly after snowfall. Even if the weather forecast predicts more snow in the coming days, do not delay washing. As soon as the car is covered with snow, rinse it off with clean water immediately. Snow contains corrosive elements that can damage the paint, chassis, tires, and rims if left covered for an extended period. Scenarios where the paint may be damaged: During the warmer seasons of summer and autumn, parking the car under trees can actually harm the paint. Many trees produce sap, which, along with fallen leaves, accumulates on the car body. If it rains several times, the leaves and sap can undergo chemical reactions that may corrode the paint, especially non-metallic paints. Ordinary white paint may lose its gloss after washing, with slight yellowing occurring. In more severe cases, colors may penetrate the white paint, and to remove the color difference, polishing may be necessary.
115
Share

What Causes a Diesel Vehicle to Fail to Shut Off When the Ignition is Turned Off?

In diesel vehicles, the fuel pump is not electrically powered; it operates as long as the engine is running. To shut off the engine, the high-pressure pump must be manually cut off from fuel supply by pulling a lever, which will cause the engine to stop after a few seconds. Below is relevant information: Introduction: Diesel engine idle speed typically refers to the operating condition where the diesel engine runs without load. For automotive diesel engines, this refers to the engine speed when in neutral. For diesel engines used in power generation, it usually refers to a certain no-load speed after startup, generally above 0.8 of its rated speed. As for diesel engines used as marine main engines, there is usually no such term as idle speed. How to Obtain: If you need to know the idle fuel consumption of a diesel engine, you can approximate it by checking its speed characteristic curve or load characteristic curve based on its idle speed value.
118
Share

Can I still drive if the oil dipstick is slightly contaminated?

Strictly speaking, it is not advisable to drive as there are potential hazards. Below is relevant information: Oil dipstick: Remember that burning 1 liter of oil per 10,000 kilometers is normal. Perform a routine check every 3,000 kilometers by inspecting the oil dipstick. Method for checking oil level: Park the car on a flat surface. With the engine off, pull out the oil dipstick, wipe it clean, reinsert it into the oil hole, ensure it is fully inserted, then pull it out again to check the oil level based on the dipstick's markings. Choosing engine oil: When selecting a lubricant brand, if you prioritize long-lasting oil, you can choose Mobil lubricants; if you care about the oil's engine cleaning capability, Shell lubricants can be used; if you need lubricants with strong oil film toughness, Castrol is recommended. For turbocharged engines, which are prone to carbon buildup at high speeds, Shell's fully synthetic oil with strong cleaning capabilities can be used.
117
Share

Should the Anti-Leakage Ball Valve Be Opened or Closed?

Anti-leakage ball valves should normally remain closed. Functions and Features of Anti-Leakage Ball Valves: Anti-leakage ball valves are primarily used for opening and closing the medium in pipelines and equipment. They are suitable for frequent operation, offering quick and effortless opening and closing. They have low fluid resistance. The structure is simple, with relatively small volume and light weight, making them easy to maintain. Working Principle of Anti-Leakage Ball Valves: When a valve with downstream self-relief function is in the closed position, the pipeline pressure acts on the outer surface of the upstream seat ring, pressing the seat ring tightly against the ball. If the medium leaks from the upstream seat into the valve cavity, when the pressure in the valve cavity exceeds the downstream pipeline pressure, the downstream seat will detach from the ball, allowing the pressure in the valve cavity to be relieved downstream of the valve.
115
Share

Will I get in trouble for speeding in a highway section with average speed cameras?

Speeding in a highway section with average speed cameras will result in penalties. Here's an analysis of two scenarios: 1. Starting point of section speed measurement: If you don't speed at the starting point, the camera won't capture your vehicle at either the starting or ending points. This means as long as you're not photographed at the first point, no speeding violation will be recorded regardless of your speed during that section. 2. Speeding at the starting point: If you exceed the speed limit at the starting point and your average speed throughout the section is higher than the maximum allowed speed, you'll be photographed at the endpoint and receive a violation. However, if your average speed within the section is below the maximum limit, no photo will be taken at the endpoint and no violation will be recorded.
104
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.