How to Obtain the Electronic Version of Driver's License on Traffic Management 12123?

What does AT mean?

AT refers to automatic transmission, which is the abbreviation of 'automatic transmission', also known as automatic gear. The automatic transmission consists of a torque converter, planetary gear transmission, and control mechanism, which can automatically adjust speed and torque according to road conditions, allowing the driver to focus entirely on the road traffic. Automatic transmission refers to an automatic gearbox, a transmission device that can automatically shift gears based on the vehicle's speed and engine RPM, as opposed to a manual transmission. There are four common types of automatic transmissions in cars: hydraulic automatic transmission, mechanical continuously variable automatic transmission, electronically controlled mechanical automatic transmission, and dual-clutch automatic transmission. DCT is also called a dual-clutch transmission. The structure of this transmission is similar to that of a manual transmission, but it has two sets of clutches. These two sets of clutches control odd-numbered gears and even-numbered gears, respectively. Dual-clutch transmissions have fast shifting speeds, high transmission efficiency, and are well-suited for use with some small-displacement turbocharged engines. AMT is the earliest automatic transmission. The structure of this transmission is the same as that of a manual transmission, except it has a control mechanism that can operate the clutch and gears. CVT transmissions are often used in some domestic or Japanese cars. These transmissions are compact, lightweight, and relatively low-cost. Most cars equipped with CVT transmissions are quite fuel-efficient. CVT transmissions do not have jerky shifts, and their smoothness is excellent. AT transmissions also have minimal shift jerkiness. Dual-clutch transmissions have noticeable jerkiness during low-speed shifts, while AMT transmissions have significant jerkiness and have largely been phased out. The development and manufacturing costs of AT transmissions are generally high, and they are often used in some high-end cars. A tiptronic transmission is a transmission device that combines manual and automatic shifting functions. This technology was developed to improve the fuel economy and controllability of automatic transmissions, allowing the driver to take back control of shift timing from the computer, thereby enhancing driving operability and enriching the driver's experience. A tiptronic transmission combines manual and automatic shifting modes. This transmission combines the advantages of automatic and manual transmissions, minimizing power loss in the transmission system. Manual mode allows the driver to freely adjust gears and RPM according to their subjective preferences. Unlike purely manual cars, tiptronic manual mode does not require the driver to operate the clutch, as it features automatic clutch control. When using manual mode in a tiptronic car, the driver only needs to switch to manual mode and adjust the gears up or down as speed changes. If the speed does not match the corresponding gear, the gear will automatically shift down; if the speed exceeds the current gear, the driver must manually shift up. Working Principle: Structurally, a tiptronic transmission mainly consists of a conventional gearbox (similar to a manual transmission), an electronically controlled clutch, an automatic shift control mechanism, and an electronic control unit. The electronically controlled clutch automatically engages, disengages, or 'floats' the clutch as needed. During operation, the transmission ECU controls a stepper motor to move the clutch fork, engaging or disengaging the clutch. The automatic shift control mechanism automatically selects the appropriate gear as needed, typically using two stepper motors controlled by the transmission ECU. The gear lever setup is similar to that of a conventional automatic transmission, with no clutch pedal. The transmission essentially uses automatic control to simulate manual shifting. Under normal driving conditions, it operates similarly to a hydraulic automatic transmission, except that the clutch is disengaged when the vehicle is stationary. Therefore, if parked on a slope, the driver must apply the brake to prevent rolling. In manual mode, the driving experience resembles that of a manual transmission car, with direct power delivery and no need to operate the clutch. Additionally, gears can be skipped during upshifts or downshifts. Product Types: Electronic and hydraulic control devices are added to the base automatic transmission. Even in manual mode, the automatic transmission system remains under control. If the driver forgets to upshift, the system will do it automatically. If attempting to downshift at high speeds, the system will not execute the command. During startup, the system automatically selects 1st or 2nd gear. In adverse weather conditions, the system switches to 'harsh weather mode' to prevent wheel slip. A transmission system combining a conventional 'H'-pattern manual transmission with an automatic clutch. The goal is to automate the clutch without altering the traditional shift mechanism of a manual transmission. Based on a manual transmission, it combines an automatic clutch with an electro-hydraulic sequential shift mechanism.

19

0

Share

What is the fuel tank capacity of the 2016 Honda Lingpai?

2016 Honda Lingpai fuel tank capacity is 47 liters. The size of the fuel tank is directly related to the vehicle's fuel consumption. Generally, a full tank can support driving over 500 kilometers. For example, a car with a fuel consumption of 10 liters per 100 kilometers usually has a fuel tank capacity of around 60 liters. Most car manufacturers follow a principle that a full tank should support driving approximately 600 kilometers, not less than 500 kilometers. While a large fuel tank capacity is beneficial, the most fundamental aspect is mastering fuel-saving techniques in daily driving. Under the premise of ensuring safety, avoiding aggressive driving actions such as sudden acceleration and hard braking can significantly reduce fuel consumption.

19

0

Share

How many seconds does the Huanglong 600 take to accelerate from 0 to 100 km/h?

Huanglong 600 accelerates from 0 to 100 km/h in 4.5 seconds. Here is some relevant information: Styling features: The Huanglong 600, model BJ600GS, retains the distinctive style of previous Benelli models in its overall lines. Just from the specifications, the Huanglong 600 delivers impressive results—upside-down front forks, radial calipers, a high-rigidity frame, and a robust rear swingarm. Even when compared to Japanese 600-class street bikes, these features do not appear inferior. Influenced by Italian design, the NK model, which should have a more conventional appearance, is endowed with exaggerated muscular lines under the influence of Italy's romantic and passionate national character, showcasing a look that differs from the traditional. Liquid-cooled four-cylinder: The Huanglong is equipped with a 600ml displacement, four-cylinder liquid-cooled DOHC 16-valve engine with a compression ratio of 11.5:1. It can produce a maximum power of 60 kW at 12,000 rpm, and a maximum torque of 55 N·m ensures sufficient traction even at low speeds. The engine features a long-stroke design, with a bore and stroke configuration of 65×45.2 mm, achieving maximum torque at just 8,000 rpm. It delivers solid power output in the low-speed range and a linear response throughout the entire range.

13

4

Share

What is the 0-100 km/h acceleration time of FAW-Volkswagen CC?

What is the 0-100 km/h acceleration time of FAW-Volkswagen CC? Here are the detailed specifications: Body dimensions: The FAW-Volkswagen CC measures 4865×1870×1459. 0-100 km/h acceleration time: The official FAW-Volkswagen data states 8.3 seconds, while actual testing results show 7.4 seconds. The new model of FAW-Volkswagen CC still lacks a launch control function. In the initial stage of acceleration, the DSG transmission limits some torque output, causing a slight delay in power delivery. After 0.5 seconds, full power is unleashed, resulting in brief front-wheel spin, ultimately achieving a 0-100 km/h time of 7.37 seconds.

2

4

Share

What is the tire specification model for the Roewe 550?

Tire specification is 215/55R16. Tire specification representation methods: There are many ways to represent tire specifications, and the four most common ones on the market are the British, German, metric, and American systems. Here’s a brief explanation of these four: The British system is used by countries that were formerly British dependencies, with units in inches. For example, 4.00H184PR indicates a width of 4 inches, suitable for speeds below 210 KM/H, with a tire rim diameter of 18 inches and a 4-ply rating. Metric tire representation: This provides a more complete description of tire characteristics. It is similar to the German system but replaces the "-" low-pressure tire mark with an "R" to indicate radial tires. For example, the rear tire of an FZR400 is 140/60R1864H, where the R in R18 indicates that the tire is a radial tire.

10

2

Share

What is the fuel consumption of the Peugeot 307?

The Peugeot 307 has a fuel consumption of 8.0 liters per 100 kilometers. Here is some relevant information: Body strength: On one hand, in the event of a collision, specially designed impact absorption zones reduce the impact on passengers, enhancing passenger protection. On the other hand, the overall body ensures excellent grounding performance, significantly improving driving safety. The Peugeot 307 series enjoys a high global reputation and is an outstanding representative in the mid-size car market. The Dongfeng Peugeot 307 not only retains the distinctive technologies and performance of the French Peugeot 307 series but also incorporates many high-tech features. It has undergone multiple rigorous scientific tests and adjustments in China, making it a perfect blend of comfort and dynamism in a sedan. It is suitable for both business purposes and meets the aesthetic, convenience, and practical needs of family use. Power performance: The Dongfeng Peugeot 307 shares the same design philosophy as other models in the series, featuring a transversely mounted engine, front-wheel drive, four-wheel independent suspension, and comprehensive active and passive safety devices. Human-centric design is evident throughout. The wheelbase measures 2.61 meters. The car is 4.47 meters long, 1.76 meters wide, and 1.51 meters tall, with a trunk capacity of 506 cubic decimeters, making it a leader in its class.

4

5

Share

How to Obtain the Electronic Version of Driver's License on Traffic Management 12123?

What does AT mean?

What is the fuel tank capacity of the 2016 Honda Lingpai?

How many seconds does the Huanglong 600 take to accelerate from 0 to 100 km/h?

What is the 0-100 km/h acceleration time of FAW-Volkswagen CC?

What is the tire specification model for the Roewe 550?

What is the fuel consumption of the Peugeot 307?

What features does the Tiida Intelligent Edition have?

What is the headlight switch instruction for the 2005 Buick Regal?

What are the reasons for the reduced power in the 14th-generation Sylphy engine malfunction?

What engine was used in the 2013 Weizhi V5?