How to Obtain the Annual Inspection Sticker?

2 Answers
LaGavin
07/29/25 5:25am
Annual inspection stickers can be obtained at the vehicle management office or at inspection stations designated by the vehicle management office. Here is more information about vehicle annual inspections: Purpose: Vehicle annual inspections can promptly eliminate potential safety hazards, encourage better vehicle maintenance, and reduce the occurrence of traffic accidents. Best Time: Vehicles can undergo inspection and apply for annual review within 3 months before the annual inspection date. It is best to go two months or slightly more than one month in advance, and try not to wait until there are only a few days left before the inspection expires. Additionally, before the 10th of each month, inspection stations have relatively fewer appointments, making it an ideal time to avoid long queues.
Was this review help?
14
4
Share
BennettRose
08/12/25 9:00am
I just went through my vehicle annual inspection last year, and getting the sticker was quite straightforward. After passing the inspection, the staff at the testing station directly gave me a paper sticker to affix to the upper right corner of the windshield. The whole process was quick: just bring the original ID card and the vehicle registration certificate, pay the inspection fee of about 100-200 yuan, and you can collect it at the window. If you're pressed for time, you can also authorize someone else to pick it up for you, but you'll need to prepare a letter of authorization and the proxy's ID. Nowadays, many places are promoting electronic stickers. Later, I applied for an electronic version through the Traffic Management 12123 APP, which can be downloaded to your phone—very convenient and hassle-free. It's advisable to promptly affix the sticker after each annual inspection to avoid being fined on the road.
Was this review help?
9
2
Share
Expand All
More Forum Discussions

Where is the window drain hole located?

The window drain hole is located at the bottom of the door panel. The door drain hole is mainly used to drain water that enters the window gap, such as rainwater or car wash water. Below is relevant information about car drain holes: 1. Concept: The vehicle drain hole is the outlet that discharges accumulated water from the vehicle during rainy days. Generally, vehicle drain holes are located in the following areas: the front windshield of the engine compartment, the four corners inside the sunroof, the lower part of the front and rear doors, inside the fuel tank cap, at the bottom of the spare tire in the trunk, and the gaps between the front and rear headlights and the body fenders. 2. Precautions: There is usually a drain hole below the fuel tank cap. If it gets clogged, water may accumulate in the fuel tank during car washes or rainy weather, potentially damaging the fuel tank. The spare tire in the trunk is generally located at a relatively low part of the body. When driving through water, if the water level rises above the headlights, water may seep in and reach the interior. The drain holes in this area are used less frequently.
20
0
Share

Can Vaseline Protect Car Sealing Strips?

Vaseline can protect car sealing strips. Vaseline is a semi-liquid mixture of alkane hydrocarbons or saturated hydrocarbons, also known as petroleum jelly, which is obtained through petroleum distillation. At room temperature, it exists in a state between solid and liquid and comes in three colors—brown, yellow, and white—depending on its intended use. Vaseline can act as a rust inhibitor and waterproofing agent, providing maintenance benefits for car door seals. Below is an introduction to car doors: 1. Car Door: A car door provides access for the driver and passengers and isolates external disturbances. It also helps mitigate side impacts to a certain extent, protecting occupants. The aesthetics of a car are also related to the design of its doors. 2. Quality of Car Doors: The quality of car doors is primarily reflected in their anti-collision performance, sealing performance, ease of opening and closing, and other functional indicators. Anti-collision performance is particularly important because, during a side collision, the buffer distance is very short, making it easy for occupants to be injured. A good car door should have at least two anti-collision beams, which are relatively heavy. This means that high-quality doors are indeed heavier, but it does not necessarily mean that the heavier the door, the better.
3
2
Share

Is There a Charge for Telematics?

Telematics services require payment. From the perspective of the costs involved in providing telematics services, they mainly consist of three parts: hardware costs (on-board terminals and software), communication costs (data traffic costs), and content costs. The hardware cost can be considered as part of the vehicle and is generally included in the vehicle price, while the communication and content costs are the main components of telematics charges. Below is an introduction to telematics: 1. Overview: Telematics enables integrated networks for intelligent traffic management, smart dynamic information services, and vehicle control. It is a typical application of IoT technology in the transportation sector, an essential path for the mobile internet and IoT to develop in depth and substance, and a convergence technology for future advancements in information communication, environmental protection, energy saving, and safety. 2. Functions: The number of vehicles equipped with telematics functions in the market is gradually increasing, but the functions are generally similar, such as remote locking/unlocking, vehicle starting, air conditioning control, vehicle anti-theft, audio/text message push, emergency rescue, and vehicle information viewing. These telematics services primarily allow control of some basic vehicle functions through a mobile app, with applications focusing on navigation, weather checking, online music, or news broadcasting.
11
5
Share

What does tire pressure reset mean?

Tire pressure reset is a tire pressure monitoring operation. Generally, when the tire pressure monitoring detects an abnormality, it will trigger an alarm. If you get out of the car and check the tires and find no issues, simply press the reset button, and the dashboard warning light will stop flashing. If you find a puncture, such as a nail in the tire, deal with the issue first and then press the reset button to cancel the dashboard alarm, allowing normal driving. Tire pressure reset itself only eliminates the dashboard warning light and does not change the actual tire pressure inside the tire. What to do if tire pressure is insufficient: If no damage is visible on the car's tires, simply inflate them to the normal pressure and reset the tire pressure system. If a puncture is found during inspection, drive to a repair shop to have it fixed, then reinflate the tire. If the low tire pressure warning appears again after inflation, but there is no puncture, it may be due to air leakage caused by a deformed wheel rim. It is recommended to check the rim and replace it if necessary. How tire pressure monitoring works: Pressure sensors installed inside the tires measure the air pressure, and wireless transmitters send this information from inside the tire to a central receiver module.
6
2
Share

What is the difference between vehicle networking and smartphone mirroring?

Here are the differences between vehicle networking and smartphone mirroring: 1. Different definitions: Vehicle networking is a massive interactive network composed of vehicle location, speed, route, and other information. Through devices such as GPS, RFID, sensors, and camera image processing, vehicles can collect environmental and status information about themselves. Using internet technology, all vehicles can transmit and aggregate their various information to a central processor. Through computer technology, this vast amount of vehicle information can be analyzed and processed to calculate the optimal routes for different vehicles, report road conditions in real-time, and adjust traffic signal cycles. Smartphone mirroring refers to the connection between handheld devices and a display (such as a car's infotainment screen) via at least one wired/wireless method. Currently, the mainstream methods for connecting handheld terminals to displays include MHL, DLNA, and Apple's proprietary AirPlay. 2. Different functionalities: Smartphone mirroring projects the functions and interface of a smartphone onto the central control display. Vehicle networking integrates in-vehicle networks, inter-vehicle networks, and mobile internet through next-generation information and communication technologies. It leverages wireless communication networks and modern intelligent information processing technologies to achieve intelligent traffic management, smart decision-making for traffic information services, and intelligent vehicle control.
19
5
Share

What are the four major systems of an engine?

The four major systems of an engine: cooling system, ignition system, lubrication system, and fuel supply system. Cooling system: The function of the cooling system is to dissipate the heat absorbed by the heated parts in time to ensure that the engine works at the most suitable temperature. Ignition system: In a gasoline engine, the combustible mixture in the cylinder is ignited by an electric spark. For this purpose, a spark plug is installed on the cylinder head of the gasoline engine, and the head of the spark plug extends into the combustion chamber. Fuel supply system: The function of the gasoline engine fuel supply system is to prepare a certain amount and concentration of the mixture according to the requirements of the engine, supply it into the cylinder, and discharge the exhaust gas after combustion from the cylinder into the atmosphere. Lubrication system: The function of the lubrication system is to deliver a certain amount of clean lubricating oil to the surface of the relatively moving parts to achieve liquid friction, reduce friction resistance, and reduce the wear of the parts. The following methods can be used for daily engine maintenance: Use lubricating oil of appropriate quality grade. For gasoline engines, SD--SF grade gasoline engine oil should be selected according to the additional devices of the intake and exhaust systems and the conditions of use; for diesel engines, CB--CD grade diesel engine oil should be selected according to the mechanical load, and the selection standard should not be lower than the requirements specified by the manufacturer; Change the oil and filter regularly. The oil quality of any quality grade of lubricating oil will change during use. After a certain mileage, the performance will deteriorate, which will bring various problems to the engine. To avoid failures, the oil should be changed regularly according to the conditions of use, and the oil volume should be moderate; When the oil passes through the fine holes of the filter, the solid particles and sticky substances in the oil accumulate in the filter. If the filter is blocked and the oil cannot pass through the filter element, the filter element will burst or the safety valve will open, and the oil will pass through the bypass valve, still bringing the dirt back to the lubrication part, causing engine wear and aggravating internal pollution; Clean the crankcase regularly. During the operation of the engine, high-pressure unburned gas, acid, water, sulfur, and nitrogen oxides in the combustion chamber enter the crankcase through the gap between the piston ring and the cylinder wall, and mix with the metal powder generated by the wear of the parts to form sludge. When the amount is small, it is suspended in the oil; when the amount is large, it precipitates from the oil, blocking the filter and oil holes, making it difficult to lubricate the engine and causing wear. Use a radiator cleaner to clean the radiator regularly. Removing rust and scale can not only ensure the normal operation of the engine but also extend the overall life of the radiator and the engine.
16
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.