How to Obtain a Vehicle License?

1 Answers
VonMalachi
07/29/25 7:42pm
Vehicle licenses are processed at the vehicle management office. According to regulations, the vehicle management office must legally accept applications for motor vehicle driving licenses, review the materials submitted by applicants, and issue motor vehicle licenses for eligible applicants based on specified standards, procedures, and timelines. For incomplete or non-compliant applications, the office must provide a written notice detailing all required corrections. For ineligible applications, the office must provide a written explanation. The process for obtaining a vehicle license includes: 1. Obtaining a vehicle qualification certificate; 2. Processing the vehicle purchase invoice; 3. Paying the purchase tax; 4. Purchasing vehicle insurance; 5. Preparing necessary documents; 6. Registering and inspecting the vehicle; 7. Selecting a license plate.
Was this review help?
11
4
Share
More Forum Discussions

How to Remove the Wiper Blades on an XRV?

Here are the steps to remove the wiper blades on an XRV: 1. Lift the driver-side wiper arm, then lift the passenger-side wiper arm. 2. Press the locking tab and slide the blade out of the wiper arm. 3. Pull the tab end and slide the blade out of the bracket. 4. Insert the new blade into the bracket from the bottom. 5. Slide the blade onto the wiper arm. 6. Lower the passenger-side wiper arm first, then lower the driver-side wiper arm. Additional information: Replacing the front wiper blade rubber on a Honda XRV. If the wiper blade rubber is aged, it may leave streaks on the windshield, and the metal wiper arm could potentially scratch the windshield glass.
16
1
Share

How to Turn Off the Headlights of an Audi A4?

The headlight switch of the Audi A4 is located on the left side of the steering wheel. To turn off the headlights, rotate the knob to the right. Starting from the 'O' position and rotating to the right, the sequence is: off, auto, night driving, and headlights. To turn on the low beams, adjust the knob to the auto or headlight position. Pushing the dimmer switch forward activates the high beams. Below is additional information: 1. In terms of powertrain, the Audi A4 3.0 comes standard with Audi's patented quattro all-wheel-drive system, providing double the traction. This system automatically, accurately, and promptly distributes the ground force to each wheel when steering or braking on various complex road surfaces, thereby enhancing the directional stability and traction of the vehicle under challenging conditions. 2. The Audi A4 1.8T and 2.4 models come standard with the multitronic continuously variable/manual transmission, representing an advancement in automotive transmission technology. It combines the advantages of both automatic and manual transmissions, offering the simplicity of an automatic transmission and the responsiveness of a manual transmission. The multitronic continuously variable/manual transmission can automatically adjust to the optimal gear ratio at any engine speed, improving the vehicle's acceleration performance while also enhancing fuel efficiency and comfort.
1
5
Share

How often should the engine belt of Golf 7 be replaced?

Replace it after the vehicle has traveled 100,000 kilometers. If the engine belt is found to be intact during replacement, it should still be replaced. Below are the steps for replacing the timing belt: 1. Remove the valve cover, detach the crankshaft pulley, and take off the timing chain cover; rotate the crankshaft to align it with the top dead center of the first cylinder, then tighten the crankshaft fixing screw to secure the crankshaft. 2. Rotate the intake and exhaust camshafts. There are grooves at the rear of the camshafts. Align the grooves of both camshafts evenly and insert the specialized tool. 3. Remove the old chain and install the new one. The crankshaft pulley does not have a sliding key. During installation, align the round hole on the pulley with the groove on the chain cover. 4. The crankshaft position sensor is adjustable. Ensure there is no gap during installation; otherwise, a fault code may be triggered. The crankshaft sprocket and pulley can rotate freely.
8
4
Share

How Many Seats Can a C License Drive?

C license can drive vehicles with up to 9 seats. More information about C license is as follows: 1. The C1 license is the most versatile type of C license, covering small cars, small automatic transmission cars, low-speed trucks, and three-wheeled vehicles, while the C2 license only permits driving automatic transmission small cars. 2. Taking the C1 license as an example, its permitted vehicle types include small cars, small automatic transmission cars, low-speed trucks, and three-wheeled vehicles. According to various complex regulations, small cars refer to vehicles with a total mass not exceeding 4.5 tons, a seating capacity including the driver not exceeding 9 people, and a length under 6 meters.
13
1
Share

Can Beijing's New Energy Vehicle Quota Be Used to Purchase Plug-in Hybrids?

Beijing's new energy vehicle quota cannot be used to purchase plug-in hybrids. Additional information regarding Beijing's new energy vehicle quota is as follows: 1. The new energy vehicle quota is only applicable to pure electric models. Hybrid models are not included in this category and still require participation in the regular passenger vehicle license plate lottery. 2. Beijing's new energy vehicle quota does not use a lottery system but instead operates on a first-come, first-served basis. 3. Individuals who already own a fuel-powered vehicle are not only ineligible to participate in the lottery for a second fuel-powered vehicle but also cannot apply for a quota to purchase a new energy vehicle. 4. Those who already own a new energy vehicle are also ineligible to purchase a second new energy vehicle and cannot apply to participate in the fuel-powered vehicle lottery.
7
5
Share

How to Start and Park an Automatic Transmission Car?

Starting method for automatic transmission cars: 1. Without pressing the brake, press the start button to turn on the ACC light, then press it again for the vehicle self-check. 2. Ensure the handbrake is engaged and the gear is in P or neutral, press the brake, then press the start button to ignite and start the engine. 3. Release the foot brake to warm up the car for 1-3 minutes. 4. Press the foot brake again, shift to D gear, and release the handbrake. 5. Observe road conditions, watch for vehicles behind and pedestrians on the side, slowly release the foot brake and press the accelerator to complete the start. Parking method for automatic transmission cars: 1. Release the accelerator, press the brake to stop the vehicle smoothly. 2. Shift the gear from D to N. 3. Engage the handbrake, release the foot brake, but do not turn off the power. 4. Continue pressing the foot brake, shift the gear from N to P. 5. Release the foot brake, press the start button to turn off the power, completing the parking.
12
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.