How to Obtain a B1 Driver's License?

1 Answers
ODerek
07/24/25 7:01am
B1 driver's license allows driving medium-sized buses. Below are the specific details about applying for a B1 driver's license: 1. To apply for a B1 driver's license, the applicant must have held a C1, C2, C3, or C4 driver's license for more than three years with no full-point records in the previous two cycles; or have held an A3 or B2 driver's license for more than one year with no full-point records in the previous cycle. Applicants who are at least 24 years old can also apply for a B1 driver's license. 2. The B1 driver's license test content is the same as the C license test, consisting of four subjects: theoretical knowledge, field driving skills, road driving skills, and knowledge related to civilized driving. Additionally, applicants must undergo a medical examination before starting the B1 driver's license training, and only those who pass the medical examination can officially begin the training. 3. The application conditions for a B1 driver's license are quite stringent: those who have caused fatal traffic accidents and bear full or primary responsibility, or have driven under the influence of alcohol, are not eligible to apply for a B1 driver's license.
Was this review help?
2
3
Share
More Forum Discussions

How to Identify the Production Month from the VIN?

The production month cannot be seen from the VIN; the 10th digit of the VIN represents the production year of the vehicle. The VIN is typically located in the lower left corner of the front windshield, on the driver's side door lock pillar, or in the engine compartment. Additionally, the VIN can be found in the vehicle's registration document under the VIN section or on the car insurance policy. Functions of the VIN: 1. Vehicle Identification: Similar to an ID card, the VIN is unique to each vehicle; 2. Traffic Violation Inquiry: When checking traffic violations online, the VIN is required to perform the query; 3. Vehicle Batch Inquiry: Some automakers may issue recalls, and if your vehicle is among the recalled models, you can use the VIN to check if it belongs to the affected batch.
11
4
Share

What Does Curb Weight Mean?

Curb weight is what was traditionally referred to as 'empty vehicle weight.' The curb weight of a car refers to the weight of the vehicle when it is fully equipped according to the factory's technical conditions (such as with a spare tire, tools, etc.) and all fluids are filled. This is an important design indicator for automobiles. Curb weight is also a significant parameter affecting a car's fuel consumption. There is a direct proportional relationship between a vehicle's fuel consumption and its curb weight, meaning that the heavier the curb weight, the more fuel the car consumes. Gross vehicle weight, also known as total weight, refers to the weight of the car when it is fully equipped and loaded with passengers (including the driver) and cargo as per regulations.
7
0
Share

What brand is Turanza?

Turanza is a tire series under the Bridgestone brand, also known as the Turanza series, with Bridgestone being its actual brand trademark. Turanza belongs to the comfort-oriented tire category, emphasizing a balance between handling and comfort. The main models of Turanza comfort series tires available in the market include Turanza T001 and Turanza AR10. The innovative tread design delivers excellent noise reduction, superior grip, and outstanding wet-road braking performance. It not only ensures the balanced comfort and handling required by high-end sedans but also enhances tire durability while incorporating eco-friendly technologies.
20
0
Share

What are the advantages and disadvantages of rear-wheel drive cars?

The advantages and disadvantages of rear-wheel drive cars are: Advantages: 1. Better handling feel, with more balanced weight distribution between front and rear wheels; 2. Smaller turning radius, making U-turns more efficient; 3. Provides more traction, improving acceleration; 4. Easier to maintain. Disadvantages: 1. Rear-wheel drive cars are prone to oversteering; 2. In rainy or snowy weather, improper steering can easily cause the vehicle to spin in place. Rear-wheel drive means that the engine's power is transmitted to the rear wheels through the driveshaft, propelling the vehicle forward. Rear-wheel drive is a relatively traditional form of drive, and most cars in the past were rear-wheel drive. Examples of rear-wheel drive cars include the Cadillac ATS-L, Infiniti Q50L, and Jaguar XEL.
19
4
Share

How to Operate the High-Low Beam Headlight Switch?

High-Low Beam Headlight Switch Operation Method: Frequently push the lever inward one notch to make the low beams flash repeatedly. Pushing the lever outward allows the high beams to stay on continuously. Pushing the lever inward one notch returns it to the low beam position. Then, pushing the lever inward one more notch makes the high beams flash once, and releasing the lever automatically returns it to the low beam position. According to the Road Traffic Safety Law, drivers must alternate between high and low beams when driving at night in situations such as sharp curves, slopes, overtaking, arched bridges, pedestrian crossings, and intersections without traffic signals. When overtaking at night, drivers should turn on the turn signal and also use the high-low beam switch to alert the vehicle ahead. When approaching an intersection, drivers should use the high-low beam switch to alert vehicles on both sides of the intersection.
17
2
Share

What Does Cylinder Scoring Mean?

Cylinder scoring refers to the appearance of distinct longitudinal mechanical scratches and abrasions on the inner wall of the cylinder within the piston ring's movement range. In severe cases, adhesive wear may occur, leading to difficulties in engine starting or spontaneous stalling. Cylinder scoring is a major engine failure, fundamentally caused by the inability to form an oil film between the cylinder wall and the piston rings or piston, resulting in poor lubrication or even dry friction. Several reasons for engine cylinder scoring include: 1. Engine overheating due to leaks or water loss in the cooling system that isn't promptly replenished; 2. Severe oil shortage caused by engine oil leaks or excessive consumption; 3. Prolonged high-speed or overload operation of the engine, leading to excessively high temperatures; 4. Improper assembly of the piston pin or cylinder liner, causing deformation.
1
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.