How to notify the owner for self-service car moving?

1 Answers
StJulian
07/30/25 7:21am
Self-service car moving can notify the owner through the 114 hotline. Other methods to move a car after being blocked: 1. Call the police: If you cannot find the owner's moving number and you have urgent matters to deal with, you can directly call the traffic police to have the car towed. 2. Contact the traffic management department: If the owner does not leave a moving number on the front windshield, you can contact specialized traffic management staff. Just provide the license plate number of the car owner, and the staff will contact the owner to move the car as soon as possible.
Was this review help?
15
5
Share
More Forum Discussions

What does ATM mean in cars?

The ATM in cars refers to the automatic manual transmission, which is an automatic transmission with manual shifting function. Nowadays, many cars are equipped with automatic manual transmissions. Essentially, this type of transmission is an automatic transmission but comes with a manual mode that allows the driver to manually control gear shifting up or down. Common automatic transmissions include CVT transmissions, DCT transmissions, and AT transmissions. The manual mode of an automatic transmission can be very useful in certain situations, such as when climbing long and steep slopes. Manually controlling the transmission gears can help keep the transmission in a lower gear without upshifting, making the climb smoother.
11
5
Share

How to Set Cruise Control on BYD S7?

BYD S7 cruise control setting method: Press the ON/OFF button at the top of the cruise control lever, maintain the throttle position, and after approximately three seconds, push the lever downward once to complete the speed setting. The basic functions of the cruise control system include: setting constant speed, deceleration or coasting, resuming, accelerating, and deactivating or canceling. When the speed setting switch SET is pressed, it stores the current speed and automatically maintains that speed. The BYD S7 is BYD's new mid-to-large-size SUV, with dimensions of 4840mm in length, 1855mm in width, 1720mm in height, and a wheelbase of 2735mm. The front suspension system of the BYD S7 is a MacPherson independent suspension, and the rear suspension system is a multi-link independent suspension.
13
3
Share

How to Use the Folding Function of Magotan's Rearview Mirrors

Magotan rearview mirror folding method: The control switch for the folding function of Magotan's rearview mirrors is located inside the driver's side door. Rotate the control knob clockwise to the folding icon at the lower right to electrically fold both the left and right exterior rearview mirrors. After using the electric folding function, do not manually fold or unfold the electrically foldable exterior rearview mirrors by mechanical means, as this may damage the electric drive mechanism. The Magotan is the first B-class sedan produced and sold by FAW-Volkswagen since its establishment, with dimensions of 4866mm in length, 1832mm in width, and 1464mm in height, and a wheelbase of 2812mm. In terms of active safety, the Magotan 1.8TSI and all models in the series are equipped with a high-level ESP electronic stability program. The Magotan features front-wheel drive.
1
2
Share

How to Bleed Hydraulic Brakes?

Hydraulic brake bleeding method: 1. Pump the brake pedal 5-6 times continuously and then hold it down; 2. Immediately loosen the bleeder screw on the right rear wheel brake caliper, then quickly tighten it. Repeat this process until all air bubbles are expelled from the bleeder screws of all wheels; 3. The recommended bleeding sequence is: right rear wheel, left rear wheel, right front wheel, left front wheel, and clutch master cylinder. During bleeding, ensure the brake fluid reservoir above the master cylinder never runs low - it must remain full at all times. Since the clutch master cylinder shares the same hydraulic circuit, it also requires bleeding. Depress the clutch pedal, loosen the bleeder bolt on the master cylinder to drain contaminated fluid, then retighten the bolt. Note that the clutch pedal may feel loose and fail to return - don't panic, simply lift it with your foot and continue pumping.
18
1
Share

Where to Check the Tire Pressure Display in a Car?

The tire pressure display is located on the car's dashboard. If the car does not have an original tire pressure monitoring function, it will have a tire pressure warning. When the inflation pressure of one or more tires is significantly low, the low-pressure tire position indicator light will illuminate the corresponding position indicator to show the location of the tire with significantly low pressure. When the tire pressure is too high, it reduces the contact area between the tire and the ground, increasing the pressure the tire bears and affecting its grip. Additionally, when the vehicle passes over bumps or uneven roads, the tire lacks sufficient space to absorb shocks, which not only affects driving stability and ride comfort but also increases the impact on the suspension system, leading to potential hazards. Moreover, the risk of a tire blowout increases correspondingly in high temperatures.
6
0
Share

Where is Dongfeng Fengguang produced?

Dongfeng Fengguang is produced domestically in China. It is a passenger vehicle sub-brand under the Dongfeng Motor brand and is manufactured by Dongfeng Xiaokang Automobile Co., Ltd. Dongfeng Fengguang is dedicated to building a comprehensive passenger vehicle brand that includes MPVs, SUVs, and sedans. Currently, it offers five SUV models: the Fengguang 580, Fengguang 580Pro, Fengguang ix5, Fengguang ix7, and Fengguang S560. The Fengguang 580 has dimensions of 4690mm in length, 1845mm in width, and 1715mm in height, with a wheelbase of 2780mm. Its front suspension features a MacPherson strut independent suspension, while the rear suspension uses a torsion beam non-independent suspension, with a front-wheel-drive configuration.
14
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.