···
Log in / Register

How to Navigate New Traffic Signals?

3 Answers
MargaretFitz
09/08/25 5:00am
Stop when the light is red, proceed when it's green. Right turn is allowed when the red arrow is off; prohibited when lit. Left turn is prohibited when not displayed, but permitted when the left turn signal is green. Decide your movement based on whether there are red lights on the left or right.
Was this review help?
20
0
Share
VanConnor
09/20/25 3:40am
I've been driving for many years, and navigating new traffic signals isn't complicated. Stop immediately when the red light comes on, don't cross the line; proceed on green, but watch out for pedestrians and other vehicles; slow down and prepare to stop at yellow lights, never try to rush through. The new ones have added arrow indicators, for example, turn left only when the left-turn green light is on, otherwise, you might get fined. Traffic lights often come with countdown displays, showing the seconds change, making it easier to react in advance. Many new lights in cities have synchronized pedestrian signals, so don't move when the red light is on, and scan the intersection for safety before the green light. If you encounter flashing lights or malfunctioning signals, don't force your way through; detour or report for repair. Develop the habit of stopping well before intersections to avoid rear-end collisions. Remember, safety first, the rule never changes.
Was this review help?
1
2
Share
Expand All
IsaacLynn
11/03/25 4:02am
The core principle of traffic signal compliance is to stop at red, go at green, and stop at yellow. New signal types have added dedicated arrows, such as green arrows indicating when turns are permitted, while standard green lights allow straight movement but prohibit unauthorized turns. Pedestrian signals are also integrated - when the pedestrian red light is lit, drivers must yield. Maintain full attention while driving; when yellow appears, decelerate instead of rushing through, as this is a high-risk situation for accidents. At intersections, observe carefully to ensure signals are functioning properly, as some smart sensor lights automatically adjust timing. Beginners can practice in low-traffic areas to build familiarity. Safety reminder: Never assume a green light guarantees safety; always confirm no pedestrians are present before proceeding.
Was this review help?
7
0
Share
Expand All
More Forum Discussions

What does 96W on a tire represent?

The meaning of 96W on a tire: The preceding number indicates the tire's load index, with 96 representing a maximum load capacity of 710KG per tire; the following letter denotes the tire's speed rating, where W indicates a maximum speed of 270 km/h. More details are as follows: 1. Tire speed rating: The speed rating of a tire refers to the maximum speed at which the tire is allowed to travel, generally represented by uppercase letters and marked on the sidewall of the tire. 2. Tire load index: The load index of a tire refers to the maximum load capacity that the tire can bear when inflated to the specified pressure.
15
4
Share

What is the issue with P0700 Transmission Control Module malfunction?

P0700 is a fault code stored by the engine control module, and its appearance generally indicates a problem with the transmission. Below is relevant information about P0700: 1: Simple fault: The transmission computer control module or a certain solenoid valve is malfunctioning. 2: Severe fault: Internal mechanical components of the transmission are damaged. 3: Solution: Use a decoder to access the transmission control module for diagnosis, which can display detailed fault codes, followed by repairs. (P0700 fault code, applicable to all automobile manufacturers, means Transmission-Control System (MIL-Request) malfunction (Malfunction Indicator Lamp request)).
19
3
Share

What materials are used to make car fuel tanks?

Car fuel tanks are primarily made from resin, aluminum alloy, and sheet metal. Below is an extended introduction to car fuel tanks: 1. Metal fuel tanks: Metal fuel tanks are divided into sheet metal and aluminum alloy types. Currently, the preferred material for metal fuel tanks is aluminum alloy. This is because aluminum alloy tanks are lighter, reducing the vehicle's load, and they are also corrosion-resistant. Many heavy-duty trucks now use aluminum alloy fuel tanks. 2. Plastic fuel tanks: Plastic fuel tanks are made from synthetic resin. Plastic tanks are even lighter in weight and also resistant to corrosion. They offer good insulation and ductility, strong impact resistance, and high plasticity.
3
0
Share

What Happens When Speed and Gear Don't Match?

If the speed is relatively high while the gear is low, the car is prone to phenomena such as sluggish acceleration, unresponsive throttle, and jerking. Conversely, if the speed is low while the gear is high, the car is more likely to stall or vibrate during driving. In actual driving, prolonged use of gears that don't match the speed can increase wear between the transmission gears, leading to larger gear meshing gaps, thereby reducing the transmission's lifespan. Speed ranges corresponding to each gear in a manual transmission: First Gear: The starting gear, used when the car moves from a standstill or climbs steep slopes, typically at speeds around 10 km/h. Second Gear: The driving gear. Used as a transitional gear for acceleration after starting or for low-speed forward movement, typically at speeds around 20 km/h. Third Gear: The acceleration gear. From this gear onwards, you can coordinate with the throttle to accelerate, increasing the car's speed to a certain extent. This gear is commonly used in urban driving at speeds between 20-40 km/h. Fourth Gear: The medium-high-speed driving gear. This is generally the highest gear used on city roads except for elevated sections, typically maintained at speeds around 60-70 km/h depending on the vehicle. Fifth Gear: The high-speed gear. Used only on elevated roads, highways, etc., generally at speeds of 80 km/h or above.
8
4
Share

What is the power output of the 1.2T Corolla?

Toyota Corolla's 1.2T engine delivers a maximum horsepower of 125 hp, with a peak power output of 85kW (116Ps) and maximum torque of 185Nm available between 1500-4000rpm. The 1.2T turbocharged engine is paired with an S-CVT transmission that simulates a 10-speed automatic manual gearbox. Toyota Corolla powertrain configuration: The Toyota Corolla's 1.2T engine produces 125 hp maximum horsepower, 85kW (116Ps) peak power, and 185Nm maximum torque between 1500-4000rpm. It's mated to an S-CVT transmission simulating 10-speed automatic manual shifting. The specifications clearly demonstrate the Corolla's excellence, with 0-100km/h acceleration outperforming competitors in its class. The powertrain calibration is particularly well-tuned for urban driving conditions - even light throttle inputs elicit immediate response, with no perceptible turbo lag from the 1.2T engine, representing this Corolla model's greatest advantage. Toyota Corolla interior features: The Corolla utilizes independent suspension front (MacPherson strut) and rear (double wishbone), with a chassis tuned for robustness, compactness, and balanced handling. Safety equipment includes eight airbags plus ABS anti-lock braking, BA brake assist, VSC vehicle stability control, TRC traction control, HAC hill-start assist, EPB electronic parking brake, and numerous other standard features.
15
2
Share

Why Can't the Car Door Be Opened from the Inside?

If the car door cannot be opened from the inside, it may be because the central locking system is not unlocked or the child lock on a particular door is engaged. Below is an extended introduction to car doors: 1. How to open from the inside: (1) Central locking not unlocked: Press the central locking switch on the driver's control panel to unlock the system. (2) Child lock engaged on a particular door: Open the door from the outside. There is a child lock on the side of the door; toggle the switch to disengage the child lock. 2. Purpose of car doors: Car doors provide access for the driver and passengers while isolating external disturbances. They also offer some protection against side impacts and enhance passenger safety. The aesthetics of a car are also influenced by the design of its doors. The quality of car doors is primarily reflected in their anti-collision performance, sealing performance, and ease of opening and closing.
1
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.