How to Measure Car Tire Pressure?

2 Answers
MariaAnn
07/25/25 1:54pm
Methods for measuring car tire pressure: 1. Quickly screw the copper nozzle of the pressure gauge onto the tire valve; 2. Observe the reading on the pressure gauge, using the inner scale as the reference, which is marked with numbers like 1, 2, 3, 4, 5, 6, 7. These numbers represent multiples of standard atmospheric pressure. For example, 2 means twice the standard atmospheric pressure; 3. Remove the pressure gauge to read the value, as it functions similarly to a stopwatch, with the needle fixed at the measured pressure value. During tire usage, tire pressure is a crucial indicator. Both excessively high and low tire pressure can cause unnecessary wear and shorten the tire's lifespan. Driving with low tire pressure can lead to increased fuel consumption, accelerated tire wear, wheel rim deformation, and potential blowouts. Conversely, excessively high tire pressure may reduce tire grip, weaken braking performance, and increase the risk of blowouts.
Was this review help?
4
4
Share
CharlesFitz
08/11/25 8:54pm
I've been driving for decades, and checking tire pressure is a piece of cake for me. You need to wait until the tires are completely cooled down before doing it, like after the car has been parked overnight. Find a reliable tire pressure gauge—I recommend a digital one for better accuracy. Unscrew the valve cap on the tire, press the gauge head firmly onto it, hold it steady for a few seconds, and then read the pressure value. Compare it with the manufacturer's recommended pressure—usually, there's a label on the driver's side door frame showing the PSI value. If it's too low, use an air pump to inflate it to the correct level; if it's too high, release some air, but don't overdo it. I always remind my family never to overlook this because insufficient pressure can lead to blowouts, increased fuel consumption, and even uneven tire wear, shortening their lifespan. Make it a habit to check once a week, especially before long trips—it saves trouble and money. Just keep a good-quality portable tire pressure gauge in the trunk; it's affordable but practical, and don't wait until problems arise to regret it.
Was this review help?
2
4
Share
Expand All
More Forum Discussions

How to Adjust the Height of an Electronic Throttle Pedal in a Car?

There is a push rod between the vacuum booster drum and the brake master cylinder. The push rod has a screw head that can be adjusted to lengthen the push rod slightly. If the brake pedal feels too soft, it indicates there is air inside, and bleeding is required.
12
2
Share

What is the working principle and maintenance method of an automobile generator?

Use a multimeter to check whether the generator has electrical output when starting the engine. Try replacing it with a generator of the same power output and pulley diameter. When the engine is running, the generator pulley drives the generator to operate. If the operation is normal, disconnect the positive terminal of the battery, and if the car stalls, the generator may not be generating electricity. Measure the voltage of the generator. Increase the throttle and change the speed. If the voltage fluctuates and stays around 12V, it is normal; otherwise, there is a problem. To determine if there is an issue with the generator, under the working condition of the voltage regulator's output voltage, if there is voltage, it indicates that both the generator and the regulator's output voltage are normal.
5
3
Share

What to Do When the Car Throttle Body Gets Waterlogged

Slowly remove the waterlogged throttle body. Use a machine to blow-dry the wet parts or wait for them to air dry naturally. Reassemble the dried throttle body. If you notice unstable idling, use an automotive diagnostic scanner to perform throttle body adaptation.
7
5
Share

How to Remove Car Floor Mats?

Floor mats should avoid high temperatures, fire exposure, acids and alkalis, strong pressure, and rainwater immersion. Avoid cigarette butts falling on the mats to prevent burns. Press the upper part of the mat with both thumbs while supporting the lower part with the other four fingers. Apply force with both hands to gently lift the mat and release the clips. Fold the mat and use the same method to press it with both hands. Apply force to gently lift the mat and release the clips.
16
5
Share

What to Do If the Car Manual Is Lost?

You can bring the relevant vehicle documents to the dealer and contact the manufacturer. The manufacturer's online system will have records, which can be checked using the vehicle identification number (VIN). Most manufacturers now provide electronic versions of the manual, which you can download yourself. Alternatively, you can ask the after-sales technicians at the 4S store to note down the important details for you.
15
2
Share

How to Adjust the Angle of Windshield Washer Nozzles?

Use a pin or a thin object to insert into the nozzle for adjusting the spraying direction and angle; When operating, first insert the pin or similar object into the nozzle by 2 to 3mm; Gently push it up or down as needed, then test the water spray and adjust to the appropriate position.
18
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.