How to Match Tire Pressure for the 15 Base Model Buick Excelle?

2 Answers
DiRafael
07/29/25 12:38am
15 Base Model Buick Excelle tire pressure matching method: Depress the brake pedal of the Buick Excelle to prepare for starting the engine. Press the one-touch start button. All dashboard lights will illuminate, indicating the engine has started. Inflate all four tires to the standard pressure. Press the tire pressure reset button to complete the matching process. Tire pressure reset method: First, turn on the ignition switch, then press and hold the tire pressure monitoring reset button. Release the button after hearing a "ding" sound. The tire pressure monitoring system will then store the current normal tire pressure data, automatically clear the previous data, and finally, the dashboard warning light will turn off, completing the tire pressure reset. Precautions for inflating tires: Always use a pressure gauge to check the tire pressure to avoid overinflation, which could cause the tire to burst. After stopping the vehicle, wait for the tires to cool down before inflating, as driving increases tire temperature, which affects pressure.
Was this review help?
10
3
Share
DeAyla
08/12/25 4:51am
I drive a base model 2015 Buick Excelle myself, and matching the tire pressure isn’t actually difficult. First, make sure all tires are inflated to the standard values, usually found on the door frame or in the manual—around 32 psi for the front tires and 30 psi for the rear. Then, get in the car, turn the ignition on (but don’t start the engine), locate the small button on the left side of the steering wheel, and hold it down until the tire pressure light on the dashboard flashes before releasing. Sometimes, you might need to wait a few seconds in the ignition-on state for it to reset. After that, take the car for a drive, maintaining a speed of 40-60 km/h for about ten minutes, and the tire pressure system will automatically learn and calibrate. Note that if the tire pressure light remains on, it could mean the sensor battery is dead, and you’ll need to visit a shop for inspection. For regular maintenance, check the tire pressure periodically—measuring it every two months can help avoid blowout risks, saving money and ensuring safety. By the way, lower pressure during cold starts in winter is normal; it will recover as the tires warm up, so don’t rush to rematch it.
Was this review help?
3
5
Share
Expand All
More Forum Discussions

What to Do If the Antifreeze Leak Cannot Be Located?

Antifreeze leaks can be categorized into external leaks and internal leaks. Below is an introduction to both types: 1. External leaks. This refers to situations where antifreeze leaks outside the engine system, such as in areas like hoses, hose connections, water pumps, radiator tanks, or heater cores. 2. Internal leaks. This refers to antifreeze leaking inside the engine. If the antifreeze level keeps decreasing without any visible external leaks, an internal leak may be the cause. Below are the reasons for internal leaks: 1. A damaged cylinder head gasket can cause coolant to enter the oil passages or combustion chamber. Coolant entering the oil passages can be identified by checking if the engine oil has emulsified. Coolant entering the combustion chamber will participate in combustion. If the spark plug's center electrode is wet or white smoke is emitted from the exhaust pipe during cold starts or driving, it can be concluded that there is an internal coolant leak. To address this issue, engine repair is required, including replacing damaged components like the cylinder head gasket. 2. Sand holes or fine cracks in the cylinder walls can also cause antifreeze to enter the combustion chamber. Sand holes are generally related to casting process issues, while cracks are often caused by improper use or maintenance, such as prolonged high-load operation, excessive thermal stress, or sudden exposure to cold water when the engine is hot. For such faults, if they cannot be repaired, the cylinder block must be replaced.
10
3
Share

Has Zotye Auto Ceased Production?

Zotye Auto has currently ceased production. Below is relevant information about Zotye Auto: 1. Brand Interpretation: The brand logo of Zotye Auto is derived from the initial letter 'Z' of the English name ZOTYE-AUTO, showcasing the company's unique identification genes, which endows the logo with strong recognizability and brand differentiation. The new logo has been completely reshaped and redesigned based on the original one, with the 'Z' shape optimized to appear more sporty and powerful. The golden ratio highlights technological dynamism, reflecting Zotye Auto's brand genes of innovation, strengthening independence, leading driving trends, and unleashing youthful passion and vitality; the linear three-dimensional effect demonstrates robust strength, embodying the solid and safe quality of Zotye Auto products, as well as reflecting the company's substantial and solid strength. 2. Vehicle Models: Its vehicle models include: Zotye T700, Zotye Z500, Zotye T600, Zotye 5008, Zotye SR7, etc.
6
1
Share

What does the battery indicator light mean in a car?

The battery warning light on a car indicates a fault in the battery system. If the headlights are left on after the car is turned off, this warning light may appear after some time. However, once the car starts and the alternator begins working, the light should turn off. If the warning light remains illuminated after starting the engine, it suggests an issue with the alternator, wiring, or the battery itself. A red warning light typically indicates a serious problem that could affect the car's operation and requires immediate inspection and repair. A yellow indicator light, while less urgent than a red warning, still signals an issue that should be addressed promptly to avoid potential complications.
3
0
Share

Which Direction to Turn the Lug Nuts When Changing a Tire - Left or Right?

The direction to turn lug nuts when changing a tire depends on the vehicle type. For passenger cars, turning right (clockwise) tightens the nuts, while turning left (counterclockwise) loosens them. However, for large trucks, the lug nut directions differ between the left and right sides. The left side (driver's side) has reverse threads, while the right side has standard threads. This means tightening is achieved by turning in the direction of the vehicle's forward motion, and loosening by turning in the reverse direction. Below are the lug nut turning directions for passenger cars and precautions for tire changing. Lug nut turning directions for passenger cars: To loosen lug nuts on passenger cars, turn counterclockwise: Place your left hand facing the center of the wheel, grip the wrench with your right hand, and lift upward to loosen the nuts. For large trucks, the left and right sides have different thread directions. The left side (driver's side) has reverse threads, while the right side has standard threads - meaning tightening is done by turning in the direction of forward motion, and loosening by turning in reverse. Precautions before changing a tire: Before changing a tire, first park the vehicle in a relatively safe and level location. Then engage the parking brake, shift into park, and turn the ignition to the "lock" position. Activate the hazard lights and place a triangular warning sign at a sufficient distance from the vehicle.
12
3
Share

How to Remove the Sunny Panel?

Method for removing the sunny panel: Start by prying open the clips from the gap above the air vent, then gradually pry downwards along the gap. Once all clips are released, pull the panel outward to remove it. Special prying tools should be used during the process to avoid damaging the panel. The center console is the dashboard located at the front of the cabin, in front of the driver and passenger seats. It serves as the mounting platform for the instrument panel, air conditioning and audio panels, storage compartments, airbags, and other devices. The center console concentrates most of the vehicle's control buttons outside of driving, with function keys for comfort and entertainment features like air conditioning and audio systems all arranged on it.
4
4
Share

What does seektrack mean?

seektrack is the button for switching radio channels. When the owner wants to switch channels, pressing it once will switch to the next channel. In addition to seektrack, other buttons also have their own functions: MUTE: mute; MODE: mode selection; VOL: volume control; BAND: channel selection; RPT: repeat playback; RDM: random playback. The car audio system is mainly composed of signal sources, amplifiers, speakers, antennas, etc. Speakers are the key components that determine the audio performance inside the car and are the terminal of the car audio system. A multi-speaker system does not combine speakers with the same characteristics, but rather reproduces the optimal frequency band of the speaker itself, eliminating unwanted frequency bands.
9
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.