How to Match the Tire Pressure Sensor on Buick LaCrosse?

1 Answers
KeiraRose
07/29/25 8:06pm
When the tire pressure displayed on the vehicle computer does not match the actual tire pressure data, a tire pressure relearning procedure can be performed. Specific steps for relearning: 1. With the vehicle ignition on, turn the left stalk on the steering wheel to select and enter the tire pressure display screen; press the SET/CRL button on the left stalk (for about 2 to 3 seconds). 2. The vehicle computer will prompt for tire pressure monitoring relearning, select 'Yes' to enter the tire pressure monitoring relearning mode. The horn will sound twice, indicating that the tire pressure monitoring relearning is in progress. 3. The horn will sound twice again, and the turn signal will stay on for about 3 seconds, indicating that the tire pressure monitoring relearning for all four tires is complete.
Was this review help?
10
2
Share
More Forum Discussions

What is the displacement of the Buick GL6?

The Buick GL6 has a 1.3T displacement. It is equipped with General Motors' new-generation 1.3T Ecotec dual-injection turbocharged engine paired with a 6-speed DSS intelligent transmission, delivering a maximum power of 120 kW and a maximum torque of 230 Nm. The Buick GL6 is an MPV model with body dimensions of 4692mm in length, 1794mm in width, and 1627mm in height, and a wheelbase of 2796mm. The GL6 features a front MacPherson independent suspension and a rear multi-link independent suspension for its chassis setup.
19
2
Share

What is the function of the Lane Keeping Assist System?

Lane Keeping Assist System function is: It is a type of intelligent driving assistance, generally based on the vehicle's Lane Departure Warning Assist System, while controlling the brakes, throttle, and steering to coordinate, allowing the vehicle to drive in the center of the lane with the assistance of a camera. When the vehicle is about to reach the road markings, the Lane Keeping System will be on standby and displayed on the dashboard via an indicator. During normal driving, vehicles equipped with Lane Keeping Assist will provide a warning, such as steering wheel vibration or an audible alert to the driver, if the vehicle's trajectory deviates and approaches the road markings.
2
0
Share

What does the Navigation on Pilot system mean?

NOP is still an assisted driving function, not autonomous driving, and may exit at any time when working conditions are not met. When using it, you must always pay attention to traffic conditions and the road environment, and never equate NOP with autonomous driving. More related introductions are as follows: Introduction 1: Never equate NOP with autonomous driving. Like Pilot, NOP is still an assisted driving function and may exit at any time when working conditions are not met. Introduction 2: When using it, you must always pay attention to traffic conditions and the road environment. For users with insufficient experience in using some automatic assisted driving functions, please try to use NOP only after becoming familiar with the Pilot function.
4
5
Share

Can a Haojue 125 motorcycle use 95 octane gasoline?

Haojue 125 motorcycle can use 95 octane gasoline. The choice of gasoline grade mainly depends on the engine's compression ratio. For motorcycles with an engine compression ratio below 9.5:1, 92 octane gasoline is sufficient. Of course, using 95 octane gasoline is also acceptable and won't cause any problems, but it's unnecessary as it doesn't provide better performance and only leads to waste. Additional information: If the motorcycle's engine compression ratio reaches or exceeds 9.5:1, it is suitable to use 95 octane gasoline. The octane rating of gasoline does not indicate the quality or cleanliness of the fuel, and blindly using higher octane gasoline is pointless.
19
0
Share

What does ETC mean at highway toll stations?

ETC is an electronic toll collection system that does not require stopping, also known as an automatic road toll system. It is a road toll method specifically designed for toll roads, commonly seen on highways, bridges or tunnels with toll policies, and some sections of urban centers to alleviate traffic congestion. According to the regulations of the State Council, starting from 2020, vehicles without ETC cannot enjoy toll discounts. In the future, highway toll stations will retain only one manual lane, and tolls can only be paid through manual channels. Additionally, newly installed ETC devices cannot be used on highways immediately; they need to be activated before normal use. During free holiday periods, vehicles with ETC can still use highways, and passing through ETC lanes will not incur charges for users who have already installed ETC. ETC Deduction Principles: Highways will have one or more ETC lanes. Through dedicated short-range microwave communication between the onboard electronic tag installed on the vehicle's windshield and the microwave antenna in the ETC lane at the toll station, and using computer networking technology for backend settlement with banks, the system achieves the purpose of allowing vehicles to pay tolls without stopping at road or bridge toll stations. All of this is based on the principle of passing first and deducting fees later. Benefits of Installing ETC: Time-saving: Eliminates the hassle of waiting in line; Green and eco-friendly: Low-carbon, as vehicles pass through toll stations without stopping, reducing noise and exhaust emissions and minimizing pollution; Reduced wear and tear: Saves costs, decreases the frequency of vehicle starts and brakes, lowers wear and fuel consumption, and users can also enjoy a 5% discount on tolls; Improved efficiency: Theoretically, ETC lanes can increase vehicle passing efficiency by 2-3 times, making traditional ETC more updated, faster, and more high-tech. Compared to license plate payment, ETC technology is more mature and advantageous. More policy support: The State Council clearly stated in the "13th Five-Year Plan for the Development of a Modern Comprehensive Transportation System" that "by 2020, the interoperability of transportation cards in key city clusters will be basically achieved, and the proportion of vehicles equipped with ETC will significantly increase." It also explicitly set the goal in the main indicators of comprehensive transportation development during the "13th Five-Year Plan" that "by 2020, the ETC usage rate for road passenger vehicles will reach 50%." More future possibilities: In addition to continuously improving the convenience of ETC installation and usage and the ETC usage rate for passenger vehicles, efforts will be made to promote ETC usage for trucks in the future. The integration of ETC systems with vehicle-to-vehicle communication, vehicle-to-road coordination, and other smart transportation development directions will be explored to provide comprehensive travel services for vehicle owners, meaning more application scenarios will support ETC usage. ETC Usage Notes: The ETC transaction sensing area is 8 meters. When encountering a stationary vehicle ahead, to prevent the vehicle ahead from having a faulty ETC device or no ETC device at all, maintain a distance of more than 10 meters to avoid automatic sensing and paying for the vehicle ahead. The recognized speed for ETC lane passage is 20 km/h. If the speed is too fast, the vehicle device information cannot be read, leading to failed deductions. Unauthorized removal or movement of the OBU device, or detachment or loosening of the ETC electronic tag, will render the electronic tag invalid. It can be sent to the bank where the ETC card was issued or the highway service office for testing. If the loosening or detachment is not due to human factors, reactivation is sufficient. When using a debit card bound to ETC, insufficient balance will also lead to failed deductions. Follow the guidance of on-site staff to use the manual MTC lane and pay with cash or card. Overly thick car windshields can cause poor sensing. This is especially important for vehicles that have undergone windshield replacement after accidents or for those who have modified their front windshields.
9
0
Share

Can a car without air conditioning be fitted with one?

It is best not to install one. The original car was not designed with air conditioning, and self-installation can have adverse effects on the engine, starter, system, and battery. Below is a relevant introduction about car air conditioning: 1. Function: It is used to adjust and control the temperature, humidity, air cleanliness, and airflow inside the car cabin to the optimal state, providing a comfortable riding environment for passengers, reducing travel fatigue, creating good working conditions for the driver, and serving as an important ventilation device for ensuring safe driving. 2. Layout form: The layout involves assembling the evaporator, heater radiator, centrifugal blower, and control mechanism together, known as the air conditioning unit assembly.
6
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.