How to Match the Tire Pressure of GAC Trumpchi?
1 Answers
GAC Trumpchi tire pressure can be matched either automatically or manually. Below is a detailed introduction to tire pressure matching: 1. Professionals perform the matching by using instruments to measure the air pressure data of all four tires, then connecting to the OBD interface under the steering wheel for matching. 2. Press the SET button on the display for about 3 seconds. After hearing a beep, the front wheels will flash. Bring the display close to the sensor, and the display will automatically receive the sensor's ID. Once the ID is visible on the display, click the OK button to confirm. Then press SET to proceed to the other tires, bring the display close to the other sensors one by one, and debug them sequentially. 3. Typically, the sensor matching method is used for tire pressure monitoring system matching. The specific operation steps involve connecting an onboard diagnostic tool, entering the sensor ID matching operation program in the receiver through the diagnostic tool, activating the sensor with a handheld trigger tool, and recording the corresponding tire position after the receiver receives the information sent by the tire pressure sensor. Exit the program once the matching is complete. However, some specialized tools are required, such as handheld triggers and onboard diagnostic tools.