How to Match the Tire Pressure for Buick Envision?

Essential Maintenance Items for Volkswagen Lavida at 20,000 Kilometers

Generally speaking, the 20,000-kilometer maintenance is a major service for a car, typically being its third maintenance. Routine items include changing the engine oil, oil filter, air filter, cabin air filter, spark plugs, etc. Replacing the engine oil and oil filter is essential. Under the harsh conditions of high temperature and high pressure inside the engine, the shelf life of engine oil is significantly shortened, and its performance deteriorates substantially. Over time, it fails to protect the engine effectively. The oil filter prevents impurities from mixing into the oil, which could cause oxidation, leading to the formation of sludge and clogging the oil passages. Both the engine oil and oil filter should be replaced simultaneously. The air filter serves to block dust and particles from being sucked into the engine during the intake process. If the filter is not cleaned for a long time, dust can enter the engine, causing abnormal wear on the cylinder walls. If it wasn't replaced during the 10,000-kilometer maintenance, it must be replaced at the 20,000-kilometer service. If the car uses standard material spark plugs, preparations should be made to replace them at the 20,000-kilometer mark. Spark plugs directly affect the engine's acceleration performance and fuel consumption. When you feel a lack of engine power while driving, maintenance should be performed. The service life of spark plugs varies depending on their material.

6

4

Share

Why does the oil light stay on in the 2008 Kawasaki Z1000?

Reasons: 1. Insufficient oil level, which reduces the oil pump's output or causes air intake, leading to a drop in oil pressure; 2. Overheating of the engine, which thins the oil, causing it to leak excessively through the gaps and resulting in reduced oil pressure; 3. Damage or excessive wear and assembly gaps in the oil pump components, which can prevent the oil pump from delivering oil or cause insufficient oil output; 4. Improper clearance between the crankshaft and the main or connecting rod bearings—too tight increases oil pressure, while too loose decreases it; 5. Oil leaks or blockages in the oil lines. II. Fault Diagnosis and Repair 1. If the oil level is insufficient, the oil pump's output will decrease or fail to pump oil due to air intake, leading to a drop in oil pressure. This can accelerate wear on the crankshaft, bearings, cylinder liners, and pistons due to poor lubrication. Therefore, check the oil level in the oil pan daily and top up with the same brand and type of oil if necessary. 2. Oil Pump Wear Excessive wear in the clearance between the oil pump shaft and bushings, gear end face and pump cover, or gear side/radial clearance can reduce oil output and pressure. Replace worn parts and resurface the pump cover to restore the clearance to standard specifications. 3. Engine Overheating Excessive scale in the cooling system, poor heat dissipation, prolonged overload operation, or delayed fuel injection timing can cause engine overheating, accelerating oil degradation, thinning, and leakage through gaps, reducing pressure. Remove scale, adjust injection timing, and operate the engine within rated load limits. 4. Increased Clearance in Main/Connecting Rod Bearings Long-term use increases the clearance between the crankshaft and bearings, raising leakage and lowering oil pressure. Every 0.01mm increase in clearance reduces pressure by 0.01MPa. Regrind the crankshaft and replace bearings to restore proper clearance. 5. Oil Cooler Leakage External leaks contaminate the engine surface and reduce pressure; internal leaks allow oil into the radiator, impairing cooling efficiency, causing overheating, oil thinning, and pressure loss. Remove the cooler for repair or replacement to restore functionality. 58 Auto

20

3

Share

Where is the Firewall Located in a Car?

Firewall in a car is installed inside the engine compartment. Here is the relevant introduction: The firewall is the name of a component in a car. During long-term driving, the car engine will inevitably generate high temperatures, which can easily cause car fires and other hazards, posing safety risks to passengers. The emergence of the car firewall has greatly enhanced the safety of passengers and drivers. In a car, the firewall is used to separate passengers from the engine, so that in case the engine catches fire, the firewall can not only protect the passengers but also allow the driver to continue controlling the engine.

9

4

Share

Are there single-choice questions in Subject 4?

Subject 4 includes single-choice questions (questions 11 to 40), with a full score of 100 and a passing score of 90. Below is a detailed introduction to Subject 4: 1. Overview: Subject 4, also known as the theoretical test for drivers, is part of the motor vehicle driver's license examination. 2. Other information: Subject 4 separates the requirements for safe and civilized driving, safe driving skills under complex conditions, and emergency handling knowledge from the original Subject 1, placing them after the actual road driving test of "Subject 3" to further assess the candidate's traffic awareness.

6

5

Share

How to Use Auto Start-Stop in Manual Transmission Cars?

In manual transmission vehicles, the auto start-stop function is enabled by default after ignition via key or push-button start. To deactivate it, press the OFF button below the center console until the indicator light illuminates. Below are relevant details: 1. Engine auto start-stop automatically shuts off the engine during temporary stops while driving (e.g., at traffic lights). The system restarts the engine when resuming motion. Its English abbreviation is STOP&START (STT). The STT intelligent fuel-saving system controls engine startup and shutdown. 2. This feature reduces engine idling and running time, thereby decreasing fuel consumption.

2

1

Share

What does 'plus a few hundred meters' mean in Subject 4?

Each expressway has a starting point and an ending point, with kilometer markers along the roadside. For example: '100 kilometers plus 100 meters' refers to a location 100 kilometers and 100 meters from the starting point. Below is a detailed introduction to Subject 4: 1. Overview: Subject 4, also known as the Subject 4 theory test or driver theory test, is part of the motor vehicle driver's license assessment. 2. Other Information: Subject 4 separates the requirements related to safe and civilized driving from the original Subject 1, including safe driving skills under complex conditions and emergency handling knowledge, and places them after the 'Subject 3' practical road driving test to further assess the candidate's level of traffic awareness.

6

0

Share

How to Match the Tire Pressure for Buick Envision?

Essential Maintenance Items for Volkswagen Lavida at 20,000 Kilometers

Why does the oil light stay on in the 2008 Kawasaki Z1000?

Where is the Firewall Located in a Car?

Are there single-choice questions in Subject 4?

How to Use Auto Start-Stop in Manual Transmission Cars?

What does 'plus a few hundred meters' mean in Subject 4?

What Phenomena Can Be Caused by Excessive Engine Oil?

Can Driving Charge the Battery?

What is the Besturn X40 carbon canister assembly?

Which Steering Wheel Cover is Anti-Slip?