How to Match the Remote Key for Changan Ono Car?
2 Answers
Method for matching the remote key of Changan Ono car: 1. Insert the key into the steering lock, switch between ACC, ON, and ACC positions four times within 6 seconds, then stop at the ACC position. At this point, the left and right turn signals on the dashboard will flash simultaneously, indicating the remote matching function is activated; 2. Within 20 seconds, simultaneously press and hold the LOCK and UNLOCK buttons until the turn signals turn off, indicating the remote function matching is complete; 3. After matching, turn the key to the OFF position or remove it, then perform lock and unlock operations. Taking the Changan Ono S as an example, its dimensions are 4450mm in length, 1685mm in width, and 1835mm in height, with a wheelbase of 2750mm. Its engine has a maximum horsepower of 107Ps, a maximum power of 78.5kw, and a maximum torque of 145Nm.
Last time when helping my neighbor with the Ono key matching, it took quite a while to figure out the proper steps. First, close all car doors, sit in the driver's seat without stepping on the brake, quickly press the lock button 5 times, and hold down the last press. The dashboard hazard lights will flash twice indicating entry into pairing mode. Then immediately press the unlock button on the new remote - if the hazards flash again, pairing is successful. Note the entire process must be completed within 30 seconds or you'll have to start over. I failed last time because I pressed half a second too slow. Later I discovered the old key also needs re-pairing, otherwise it will become invalid. When testing after pairing, stand 3 meters away from the car for accurate key response.
