How to Match the Initialization Setting of the Tiguan Sunroof?

1 Answers
LeLandon
07/29/25 9:37pm
Tiguan sunroof initialization setting matching method: Press and hold the sunroof button to open it completely, then continue holding for a few seconds without releasing. Similarly, press and hold the close button and continue holding for a few seconds. Repeat this process several times. Below are related content introductions: 1. Body Dimensions: The Tiguan has a length, width, and height of 4506mm, 1809mm, and 1685mm respectively, with a wheelbase of 2684mm. The engine type is turbocharged, and the drive modes are front-wheel drive and front four-wheel drive. 2. Configuration: The Tiguan is equipped with two engines, the 1.8TSI and 2.0TSI, which are powerful and highly fuel-efficient. The 2.0TSI engine can output a maximum power of 147kW and a maximum torque of 280Nm.
Was this review help?
7
3
Share
More Forum Discussions

What are the differences between BMW sports seats and regular seats?

BMW sports seats and regular seats differ in terms of wrapping and comfort. Here is the relevant information: 1. Sports-style seats: These are seats designed for the dynamic response of the body and human body during high-speed driving. When designing this type of seat, special attention is paid to reinforcing the backrest and cushion to provide good lateral support for the waist, shoulders, and back on both sides of the body. 2. General regular car seats: These emphasize comfort, but when driving on curves, they cannot support the strong centrifugal force exerted on the body by lateral acceleration, causing the body to tilt severely. This also relatively affects the grip and steering feedback transmitted by the body, and for high-power sports vehicles, this situation will reduce safety.
14
4
Share

What are the new vehicle inspection regulations for small cars in 2020?

The new vehicle inspection regulations for small cars in 2020 expand the exemption from inspection to include non-operational small and micro passenger vehicles with 7 to 9 seats (excluding minivans) within 6 years of use, in addition to the existing exemption for non-operational small and micro passenger vehicles with 6 seats or fewer (excluding minivans) within 6 years. Below are the relevant details: 1. New vehicle inspection regulations 2020: For biennial periodic inspections, the vehicle owner can directly apply to the traffic management department of the public security authority for the inspection label by providing proof of compulsory traffic accident liability insurance, and proof of vehicle and vessel tax payment or exemption, without the need for safety technical inspection at an inspection institution. For non-operational small and micro passenger vehicles (excluding minivans) over 6 years but under 10 years old, the inspection cycle is relaxed from once a year to once every two years, meaning only two on-site inspections are required within 10 years, specifically in the 6th and 8th years. 2. Required materials for annual inspection: Vehicle registration certificate; for exempted vehicles, the owner’s identity proof can also be submitted; if handled by an agent, the agent’s identity proof (if the agent is a unit, the handler’s identity proof must also be submitted) and a written authorization from the vehicle owner are required; proof of compulsory traffic accident liability insurance; vehicle safety technical inspection certificate issued by an inspection institution (except for exempted vehicles); proof of vehicle and vessel tax payment or exemption.
4
0
Share

Where is the key insertion point for the Skoda Superb?

The mechanical keyhole for the Skoda Superb is located behind the decorative cover on the exterior door handle of the driver's side. Introduction to car keys: A tool for switching the car on and off. Modern car keys use chips, which are part of a magnetic chip system. The ignition lock cylinder's reading coil reads the chip in the key; each chip contains fixed digital information. Car remote key: A remote key allows you to unlock and lock the car from a distance without inserting the key into the lock. Its greatest advantage is that, regardless of day or night, you can conveniently unlock and lock the car from a distance without needing to locate the keyhole.
11
3
Share

What are the symptoms of a Passat transmission solenoid valve failure?

Passat transmission solenoid valve failure symptoms and solutions are as follows: Solenoid valve failure: Solenoid valve coil short circuit or open circuit; Solenoid valve plug/socket issues; Solenoid valve spool problems. Solutions: The solution is to replace the solenoid valve coil. Correct any wiring errors, repair or replace the plug/socket. First check if there are issues with the medium, such as excessive water in the compressed air or many impurities in the liquid medium. Clear any water or impurities in the solenoid valve and pipelines. If the problem persists, then the spool needs to be replaced or consider replacing the entire solenoid valve.
9
1
Share

What Causes Brake Failure When Driving Through Water?

Braking is achieved through intense friction between the brake pads and brake drums. When wheels are submerged in water, a thin layer of water forms between the brake pads and drums, acting like a lubricant that makes the surfaces slippery and reduces friction, making it difficult to control the vehicle's stopping. Countermeasures for brake failure while driving: 1. Friction deceleration: Use rigid parts of the vehicle such as the bumper or body to rub or collide with natural roadside obstacles (rocks, large trees, or slopes) to force the vehicle to stop and minimize accident damage. 2. Downshifting: When experiencing brake failure while going uphill, promptly downshift to medium or low gear to maintain sufficient power to reach the top. If stopping on a slope is necessary, keep the vehicle in low gear, engage the parking brake, and have passengers secure the wheels with stones or wooden blocks. If the vehicle starts sliding backward, turn the rear toward the hillside or a safe direction, and turn on the headlights and emergency flashers to alert other drivers.
20
0
Share

What Insurance Should a New Car Have?

New cars require the following insurance policies: 1. Compulsory Traffic Accident Liability Insurance: This is a mandatory insurance in China, and all vehicles must purchase it. In the event of a traffic accident, the insurance company can only compensate the party that was hit, meaning the conditions for compensation are limited. Additionally, without this insurance, the vehicle will lose its eligibility for annual inspection. Therefore, it is essential to have this insurance. 2. No-Deductible Insurance: This is an additional optional insurance for cars. Its purpose is that if you are involved in an accident requiring compensation, the insurance company typically covers 80% of the losses. With No-Deductible Insurance, the remaining 20% that you would normally have to pay is also transferred to the insurance company, meaning you can receive 100% compensation. 3. Vehicle Damage Insurance: Undoubtedly, this is the most comprehensive necessary insurance with the broadest coverage. Whether the car suffers from collisions, scratches, water damage, or other harm, you can receive compensation from the insurance company. The final amount of compensation depends on various factors such as the cause of the incident and the extent of the damage.
18
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.