How to match the headlights of a Passat?

1 Answers
DiBrantley
07/29/25 3:50pm
The method to match the headlights of a Passat is: 1. Turn on the ignition switch; 2. Connect the MS906S to the vehicle; 3. Ensure normal communication and quickly enter the vehicle model through the VIN code intelligent recognition function; 4. Select programming to complete the matching. The Passat is a mid-size 4-door, 5-seater sedan. Taking the Passat 2020 280TSI Business Edition as an example, its body dimensions are: length 4933 mm, width 1836 mm, height 1469 mm, and wheelbase 2871 mm. The Passat 2020 280TSI Business Edition is equipped with a 1.4L turbocharged engine, with a maximum power of 110 kW, maximum power speed of 5000 rpm, maximum torque of 250 Nm, and maximum torque speed between 1750 to 3000 rpm.
Was this review help?
11
0
Share
More Forum Discussions

How to Drive the Geely Binrui During the Break-in Period?

When driving the Geely Binrui during the break-in period, pay attention to the following aspects: 1. Use high-quality fuel for the Geely Binrui during the break-in period. 2. Do not exceed 4000 RPM for the engine. 3. Avoid aggressive acceleration and braking. Precautions for break-in period driving include: 1. Frequently check the engine oil, coolant, and battery electrolyte levels during the break-in maintenance period, and top them up immediately if they are low. 2. Avoid driving at full load. All components of a new car are freshly manufactured, and the break-in period generates many metal shavings in the engine. Additionally, the shock absorption system, transmission system, and braking system are all new parts, and their interfaces are not yet perfectly aligned. Full-load driving can overload the engine and other components, causing damage. 3. The break-in period is divided into three stages: The first stage is the initial 100 kilometers, during which you should shift gears frequently but avoid aggressive driving—maintain a gentle driving style. The second stage is from 100 to 1000 kilometers, with a maximum speed not exceeding 80 km/h. The third stage is from 1000 to 3000 kilometers, where the speed should not exceed 80% of the maximum speed, and you should monitor the engine RPM and speed gauges to ensure both operate at moderate levels, around 3000 RPM. 4. Avoid emergency braking, as it uses the engine's traction force combined with the braking system to bring a high-speed car to a sudden stop. This not only damages the engine but also increases the load on the chassis, negatively affecting both the brakes and the chassis.
10
2
Share

Can the Suzuki Fengyu dashboard display be switched to Chinese?

To change the dashboard display of the Changan Suzuki Fengyu to Chinese, you need to operate the buttons on the right side of the multifunction steering wheel. The specific steps are as follows: 1. Scroll up and down using the wheel-shaped button on the right to select functions. 2. Select the settings option and press the wheel button to enter. 3. Scroll down to find the language option and enter this option. 4. In the pop-up options, find the language option and press the wheel to confirm. 5. At this point, the text on the dashboard display system will change to Chinese. Here are some other aspects of the Changan Suzuki Fengyu: 1. Exterior. The front face has undergone significant adjustments, with the redesigned vertical slat grille connecting to the reshaped headlight cluster, creating a very outstanding effect. Combined with the more complex lines of the front bumper, the overall appearance looks more fashionable. 2. Interior. Compared to the current model, the adjustments are minimal, only involving the button layout on the center console. However, the newly adjusted interior color scheme has provided a notable update to the new interior. 3. Powertrain. The overseas version of the new car will be equipped with 1.0T and 1.4T gasoline engines, as well as a 1.6T diesel engine. 4. Transmission. The 1.0T engine will be paired with a 5-speed manual transmission, while the other two engines will be matched with either a 6-speed manual or a 6-speed automatic transmission.
11
0
Share

Is it better to use 92 or 95 octane gasoline for the new Qashqai?

According to the official vehicle user manual recommendation, the new Qashqai should use 92 octane gasoline. In addition to checking the appropriate gasoline grade in the vehicle user manual, you can also find it on the fuel tank cap, which will also be marked. Usually, the gasoline grade can also be determined based on the engine's compression ratio. Vehicles with an engine compression ratio between 8.6-9.9 should use 92 octane gasoline, while those with a compression ratio between 10.0-11.5 should use 95 octane gasoline. However, with the application of some new technologies, the gasoline grade cannot be solely determined by the compression ratio. A high compression ratio can also be adjusted to use lower octane gasoline because, besides the compression ratio, other factors such as ignition timing, turbocharging technology, and Atkinson cycle technology also play a role. Generally speaking, the higher the gasoline octane number, the higher the octane value and the better the anti-knock performance. 92 octane gasoline contains 92% isooctane and 8% n-heptane, while 95 octane gasoline contains 95% isooctane and 5% n-heptane. If the new Qashqai occasionally uses the wrong gasoline grade, simply switch back to the correct grade after consumption. However, long-term use of the wrong gasoline grade can have the following effects: For vehicles recommended to use lower octane gasoline, using higher octane gasoline will not cause damage, but the increase in octane value will change the fuel's ignition point, leading to delayed combustion in the engine. This means both the engine's power output and thermal efficiency will decrease, resulting in poorer performance as experienced in practice. For vehicles recommended to use higher octane gasoline, using lower octane gasoline can cause engine knocking. Because the octane value is too low, the gasoline's ignition point decreases, causing it to ignite prematurely during the compression stroke. If the fuel ignites before the spark plug fires during the compression stroke, resistance will occur during the upward stroke. This resistance makes the engine run very unstably. If it's mild knocking, it only increases noise without significant damage to the engine. However, if there is noticeable knocking, it indicates severe engine conditions. The vibrations not only affect driving stability but also cause abnormal wear on the pistons and cylinders, and in severe cases, can lead to cylinder scoring.
13
0
Share

What type of battery does a Volkswagen car key use?

The battery model for Volkswagen car keys is CR2032. CR2032 is a lithium manganese dioxide battery, named according to IEC standards. The naming convention is as follows: C - indicates a chemical battery system with lithium metal as the negative electrode and manganese dioxide as the positive electrode; R - indicates that the battery is cylindrical in shape; if it were square, F would be used instead; 20 - indicates the battery diameter is 20mm; 32 - represents the battery height of 3.2mm. The nominal voltage is 3.0V, the endpoint voltage is 2.0V, and the rated capacity varies between 200-240mAh depending on the manufacturer. The shelf life of a CR2032 battery is typically 5 years. However, if the manufacturer's production standards are low or quality control is poor, the lifespan can be significantly reduced. Domestic first-tier brands can generally guarantee this lifespan. Under ideal conditions (sealed, room temperature, no moisture, etc.), the lifespan can be extended to 8 years or even 10 years. Generally, replacing a car key battery involves the following three steps: Step 1: Remove the mechanical key. Press the latch on the side of the smart key to remove the mechanical key. Step 2: Open the battery cover. After removing the mechanical key, you will see a deep slot and a shallow slot at the top of the smart key. The deep slot is for the keyhole, while the shallow slot is used to open the battery cover. Insert the mechanical key into the shallow slot and pry it outward to open the battery cover. Once opened, you will see the coin cell battery, which can be easily removed with a gentle push. Step 3: Replace the battery. Install the new battery, then reattach the battery cover and mechanical key in order. The key battery replacement is now complete.
4
5
Share

How many seconds does the Honda Spirior take to accelerate from 0 to 100 km/h?

According to official data, the Audi A6 comes with two engine displacements: 2.0T and 2.4T. The 2.0T model accelerates from 0 to 100 km/h in 11.9 seconds, while the 2.4T model does it in 8.6 seconds. The factors affecting a vehicle's 0-100 km/h acceleration time are as follows: Torque: Torque, in layman's terms, indicates how much force is available. The greater the torque, the more force is available to propel the vehicle, resulting in faster acceleration. The Audi R8 has a maximum torque of 190 Nm and accelerates from 0 to 100 km/h in 11.9 seconds. The Audi A6 3.0T has a torque of 247 Nm and achieves the same in 8.6 seconds. Transmission efficiency: The transmission serves as the medium for power delivery, inevitably involving power loss. The higher the transmission efficiency, the better the acceleration performance. Generally, the ranking of transmission efficiency is as follows: manual transmission > dry dual-clutch transmission > wet dual-clutch transmission > AT transmission > CVT transmission. The Honda Spirior 2.0T is equipped with a CVT continuously variable transmission, while the 2.4T model features an 8-speed DCT dual-clutch transmission. Power-to-weight ratio: The relationship between horsepower and vehicle weight is referred to as the power-to-weight ratio (measured in Hp/T). The higher the power-to-weight ratio, the faster the acceleration. The Audi R8 has a power-to-weight ratio of 373 Hp/T and accelerates from 0 to 100 km/h in 3.1 seconds. The Audi A6 has a power-to-weight ratio of 171 Hp/T and achieves the same in 5.6 seconds.
11
3
Share

Where is the tire pressure reset button on the new Lavida Plus?

In the central control screen. The new Lavida Plus has eliminated the physical tire pressure reset button, and the settings are now directly accessible through the central control screen. Tire Pressure Reset: Tire pressure reset is an operation performed on the tire pressure monitoring system to reset it after addressing a tire pressure fault. Tire Pressure Reset Method: First, turn on the ignition switch, then press and hold the tire pressure monitoring reset button until you hear a "beep" sound before releasing it. The tire pressure monitoring system will then store the current normal tire pressure data, automatically clear the previous data, and finally, the fault light on the dashboard will turn off, indicating the completion of the tire pressure reset.
13
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.