How to Match Gears and Speed?

How to Reverse Park in Automatic Transmission for Subject 2?

After getting in the car, first adjust the seat, fasten the seat belt, and check the rearview mirrors, gear, and handbrake to ensure everything is in order. Shift into first gear, release the handbrake, and straighten the car body. Stop when your shoulder aligns with the ground control line. Shift into reverse gear and observe the lower edge of the left rearview mirror. When it aligns with the ground control line, turn the steering wheel fully to the right. Pay attention to maintaining a 30 cm distance between the car body and the parking corner. When the car body is parallel to the sideline, straighten the steering wheel. Make minor adjustments if necessary, avoiding large corrections. Stop when the lower edge aligns with the parking line.

1

2

Share

What's the difference between 1.3t and 1.5t?

1.3t and 1.5t have the following differences: 1. Different engine displacement: The 1.3t engine has a displacement of 1.3 liters; the 1.5t engine has a displacement of 1.5 liters. 2. Different maximum power: The 1.3t engine has a maximum power of 102 kW; the 1.5t engine has a maximum power of 124 kW. 3. Different maximum torque: The 1.3t engine has a maximum torque of 235 Nm; the 1.5t engine has a maximum torque of 285 Nm. The 't' stands for turbocharged engines, and their working principle is: using the exhaust gas generated by the internal combustion engine to drive the air compressor.

2

0

Share

How to Deal with Indentations After Removing a Hand-Stitched Steering Wheel Cover?

You can place a damp towel over the indentation on the hand-stitched steering wheel and gently iron it with controlled temperature to make the indentation disappear. You can insert padding material, and after some time, the indentation on the hand-stitched steering wheel will gradually fade away. Turn on a hairdryer to the hot setting and repeatedly blow air at the indentation on the hand-stitched steering wheel, adjusting the distance to control the temperature. After blowing, let it sit for about 5 minutes, and the crease will gradually disappear. Use the palm of your hand to manually heat and rub the indentation area on the hand-stitched steering wheel for three consecutive days.

13

2

Share

Is the Tharu's transmission a dry or wet dual-clutch?

The Tharu models equipped with the 1.4T engine use a dry dual-clutch transmission, while the models with the 2.0T engine employ a wet dual-clutch transmission. Here is more information about dual-clutch transmissions: 1. The structure of a dual-clutch transmission is essentially the same as a manual transmission, except it has two sets of clutches - one controls the odd-numbered gears and the other controls the even-numbered gears. 2. Dual-clutch transmissions feature high transmission efficiency, fast gear shifting, relatively compact size, and lighter weight. Additional information: The Tharu is a compact SUV launched by SAIC Volkswagen, featuring the Rock Cutting design concept in its exterior. The raised lines on the ridge-style hood enhance the sense of power, while the wide-body dual U-shaped full LED headlights tilt upwards, with the grille strips extending to the headlights.

9

3

Share

What is the minimum ground clearance of the Peugeot 4008?

The minimum ground clearance of the Peugeot 4008 is 170mm. Minimum ground clearance refers to the distance between the lowest protruding part of the vehicle's chassis and the horizontal ground when the car is fully loaded on a level surface. The Peugeot 4008 is a compact SUV with body dimensions of: length 4510mm, width 1850mm, height 1628mm, a wheelbase of 2646mm, a fuel tank capacity of 53 liters, and a trunk capacity of 461 liters. The Peugeot 4008 is equipped with a 1.6T turbocharged engine, delivering a maximum horsepower of 170PS, a maximum power of 125kW, a maximum torque of 250Nm, and is paired with a 6-speed automatic transmission.

19

3

Share

Can black-painted rims pass the annual vehicle inspection?

Black-painted rims can pass the annual vehicle inspection. According to regulations, as long as the specifications remain unchanged, it does not affect the inspection. Based on automotive traffic management laws, there are no explicit restrictions on the color of rims, but there is a requirement that they must not exceed 30% of the vehicle's overall color. The annual inspection time requirements for various types of motor vehicles are as follows: 1. For passenger transport vehicles, an annual inspection is required within 5 years; for vehicles over 5 years old, an inspection every 6 months is required. 2. For cargo vehicles and large or medium-sized non-passenger transport vehicles, an annual inspection is required within 10 years; for vehicles over 10 years old, an inspection every 6 months is required. 3. For small and micro non-passenger transport vehicles, an inspection every 2 years is required within 6 years; for vehicles over 6 years old, an annual inspection is required; for vehicles over 15 years old, an inspection every 6 months is required. 4. For motorcycles, an inspection every 2 years is required within 4 years; for vehicles over 4 years old, an annual inspection is required.

16

4

Share

How to Match Gears and Speed?

How to Reverse Park in Automatic Transmission for Subject 2?

What's the difference between 1.3t and 1.5t?

How to Deal with Indentations After Removing a Hand-Stitched Steering Wheel Cover?

Is the Tharu's transmission a dry or wet dual-clutch?

What is the minimum ground clearance of the Peugeot 4008?

Can black-painted rims pass the annual vehicle inspection?

What is the reason for one side of the BMW X6 daytime running light not working?

How many cylinders does the BJ40 engine have?

What is the body length of the Elysian in meters?

What Causes a Sudden Increase in Idle Speed While Driving?