How to Match a Tire Pressure Sensor?

1 Answers
VanNathan
07/30/25 9:15am
The method for matching a tire pressure sensor is as follows: 1. With the vehicle ignition on, turn the left steering wheel lever to select the tire pressure display input field; 2. Press the SET or CRL button on the left lever for 2 to 3 seconds. The onboard computer will prompt for tire pressure monitoring relearning, then select 'Yes'; 3. The horn will sound twice, indicating that the tire pressure monitoring relearning is in progress; 4. The left turn assist light and left mirror turn signal will stay on, indicating relearning for the left front tire pressure; 5. Increase or decrease the left front tire pressure for about 5 seconds to complete the left front tire relearning; 6. The horn will sound to indicate entering the tire pressure learning mode; 7. The horn will sound twice, and the turn signal will stay on for about 3 seconds, indicating that the relearning for all four tire pressure monitors is complete, thus finishing the matching process.
Was this review help?
14
5
Share
More Forum Discussions

What's the reason when the car AC indicator light is on but the compressor doesn't start?

The reason why the car AC indicator light is on but the compressor doesn't start is due to compressor damage. The following describes the process of air conditioning refrigeration: 1. Compressor operation: When the car air conditioning is cooling, the compressor clutch will engage, at which time the engine drives the compressor to operate. During operation, the compressor continuously compresses the refrigerant and delivers it to the evaporator. 2. Refrigerant operation: The refrigerant continuously expands and absorbs heat in the evaporator, cooling the evaporator; the cooled evaporator then cools the air blown by the blower, allowing the car air conditioning vents to blow cold air.
8
1
Share

Which Cars Have a Refrigerator in the Front Passenger Seat?

Cars with a refrigerator in the front passenger seat include: Volkswagen CC, Lavida Hatchback, Touareg, Scirocco, Phaeton, Touran, Pundar, Mercedes-Benz S350, BMW 740, Audi A8L, Cayenne, etc., all of which come with built-in car refrigerators. Relevant information is introduced as follows: A car refrigerator refers to a cooling cabinet that can be carried in a car. Car refrigerators are a new generation of cooling and refrigeration appliances that have become popular in the international market in recent years. There are mainly two types of car refrigerators on the market: one is a semiconductor car refrigerator, which works by electronic chip cooling; the other is a compressor car refrigerator, which uses traditional compressor technology. The latter has a lower cooling temperature, down to -18 degrees, higher cooling efficiency, can make ice and preserve freshness, and has a larger volume.
4
0
Share

What is the minimum ground clearance of the Xingyue L?

The minimum ground clearance of the Xingyue L is 168mm. The minimum ground clearance of the Xingyue L refers to the distance between the lowest point (excluding the wheels) and the supporting plane, which indicates the vehicle's ability to pass over obstacles such as rocks and tree stumps without collision. A higher ground clearance of the Xingyue L improves its off-road capability, but if the ground clearance is too high, the stability at high speeds may decrease. The Xingyue L is a compact SUV under Geely Auto. The length, width, and height of the Xingyue L are 4770mm, 1895mm, and 1689mm respectively, with a wheelbase of 2845mm. Generally, the ground clearance of sedans ranges between 110mm and 150mm, while SUVs have a ground clearance between 200mm and 250mm. However, the ground clearance of the Xingyue L is not static; it also depends on the load condition. Therefore, changes in ground clearance should be considered based on the Xingyue L's load variations. When selecting a vehicle, ground clearance can be one of the reference factors. The choice should depend on the vehicle's intended use and road conditions. For urban areas with well-paved roads, a vehicle with lower ground clearance can enhance stability and comfort. If the vehicle will frequently travel to remote areas or regions with poor road conditions, a higher ground clearance may be preferred to avoid damage to the undercarriage.
6
2
Share

Why does the ESP light come on with a camshaft position fault in the Sagitar 1.6?

ESP light coming on does not necessarily indicate a fault. You can first clear the fault code and then start the engine to see if the light comes on again. If it does, the possible reasons are as follows: 1. Sensor failure: such as wheel speed sensor, steering sensor, side slip sensor, lateral acceleration sensor, etc. 2. Line failure: failure in the circuit between ESP and the sensor or actuator. The resistance or continuity can be measured to check for faults. 3. Actuator failure: refers to faults in the four braking systems. Below is an introduction to related content: ESP: ESP is an electronic stability system. Generally, in addition to ABS, some cars are also equipped with ESP, which is an important component of the auxiliary braking system. Especially when driving on snowy roads, ESP can make braking safer.
20
4
Share

What is the reason for the failure of the Geely Emgrand steering wheel locking system to unlock?

Currently, there are two main reasons for this malfunction: one is a failure of the vehicle's ACC relay itself; the other is the owner installing additional electrical equipment such as a dashcam by drawing power from the vehicle's fuse box, causing the system to falsely report an error. Below is more information about the Geely Emgrand: 1. Steering wheel locking system unlocking method: Due to non-standard practices in many domestic car modification shops, installing electrical equipment like dashcams by drawing power from the vehicle's fuse box can cause false error reports in the original circuit system. Simply removing the power-drawing wire from the fuse box can restore normal function. If the error persists after restoring the vehicle's circuit, a relay failure may be suspected, and it is recommended to visit a 4S shop or repair facility as soon as possible. 2. Brand features: Geely Emgrand (referred to as Emgrand) is a sub-brand under the Geely parent brand. The new Geely Emgrand was launched on July 26, 2014, equipped with a 1.3T GeTec DVVT turbocharged engine, featuring front-wheel drive, a maximum power of 98kw, turbo engagement at 1800 rpm, and a peak torque output of 185 NM at 2000 rpm. 3. Brand characteristics: Emgrand advocates 'Excellence, Stability, and Prestige' as its brand proposition, representing Geely Auto's development direction of safety, energy efficiency, and environmental protection, both inheriting and breaking through for Geely Auto.
20
3
Share

Symptoms of Oxygen Sensor Failure?

Once the oxygen sensor fails, the computer of the electronic fuel injection system will not be able to obtain information about the oxygen concentration in the exhaust pipe, thus failing to perform feedback control on the air-fuel ratio. This will lead to increased engine fuel consumption and exhaust pollution, as well as engine issues such as unstable idling, misfiring, and surging. Typically, there are two oxygen sensors, described as follows: 1. Front Oxygen Sensor: The front oxygen sensor is used to adjust the mixture concentration, while the rear oxygen sensor monitors the working condition of the three-way catalytic converter. Failure of the front oxygen sensor will result in the inability to correct the mixture, leading to increased vehicle fuel consumption and reduced power. 2. Rear Oxygen Sensor: Failure of the rear oxygen sensor means the working condition of the three-way catalytic converter cannot be determined. If the three-way catalytic converter fails, timely maintenance will not be possible, ultimately affecting the engine's operating condition.
2
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.