How to Match a Dual Clutch Transmission Using 431?

1 Answers
EmeryLynn
07/30/25 5:48am
Dual clutch matching method using 431: 1. Connect the 431 diagnostic computer to the vehicle and enter the transmission system directory; 2. Click on the basic system adjustment option; 3. At this point, you can observe the data stream. The dual-clutch transmission is currently a popular automatic transmission, which is developed based on manual transmissions. The Dual Clutch Transmission (DCT) differs from conventional automatic transmission systems - it's based on manual transmissions yet not fully automatic. In addition to offering the flexibility of manual transmissions and the comfort of automatic transmissions, it also provides uninterrupted power output.
Was this review help?
19
5
Share
More Forum Discussions

What is the maintenance interval for the Honda Civic?

The following introduces the maintenance interval for the Honda Civic: 1. The first maintenance for the 10th-generation Civic is due when the vehicle reaches 5,000 kilometers or 3 months (whichever comes first). After that, the maintenance interval is every 5,000 kilometers or 6 months (whichever comes first). 2. The maintenance interval mileage for the 10th-generation Civic is considered good among domestic brands. The first maintenance requires replacing parts such as engine oil, oil filter, and some routine inspection items. Subsequent maintenance builds on this foundation, adding different items and optional projects as specified in the maintenance manual.
12
5
Share

Which engine is equipped in the Edge?

The Edge is equipped with a 2.0T turbocharged engine, paired with an 8-speed automatic transmission. It delivers a maximum horsepower of 245 HP, a maximum power output of 180 kW at 5500 rpm, and a peak torque of 390 N·m available between 2500 to 3500 rpm. The Edge is a midsize SUV under Changan Ford, with exterior dimensions of 4878mm in length, 1925mm in width, and 1734mm in height. It features a wheelbase of 2850mm, a fuel tank capacity of 69L, and a cargo space ranging from 947L to 2039L.
4
1
Share

What are the usage methods and steps for a motorcycle?

Insert the motorcycle key into the lock cylinder, then turn it to the right. Hold the clutch with your left hand and use your left foot to step on the rear end of the gear shifter to adjust the gear to neutral (0 gear). Start the engine with a firm and quick motion. Hold the clutch again and step on the front end of the gear shifter to shift into first gear (1 gear). Turn the throttle with your right hand to give it gas while gradually releasing the clutch to successfully start the motorcycle.
15
1
Share

Does the Vios Crankshaft Sensor Control Ignition?

The Vios crankshaft sensor controls ignition. The crankshaft position sensor is one of the main sensors in the engine electronic control system, providing signals for ignition timing (ignition advance angle) and confirming the crankshaft position. It is used to detect the piston top dead center, crankshaft angle, and engine speed. Taking the Vios 2021 1.5L Manual Forward Edition as an example: it is a compact 4-door 5-seater sedan under FAW Toyota, with a length, width, and height of 4435mm, 1700mm, and 1490mm respectively, a wheelbase of 2550mm, equipped with a 5-speed manual transmission, and a top speed of 190 kilometers per hour.
1
2
Share

How to Cancel the Maintenance Reminder on the Boyue?

Methods to cancel the Boyue maintenance reminder: 1. After starting the vehicle, press the top of the turn signal until the TRIP interface is displayed on the dashboard; 2. Press the mode button on the upper right side of the steering wheel to enter the setup menu; 3. Use the up and down buttons to find the reset maintenance mileage menu; 4. After locating the reset maintenance mileage interface, press the mode button again, enter the secondary menu, and use the volume control lever to select and clear the reminder. The Boyue is a compact SUV under Geely Auto, with body dimensions of 4519mm in length, 1831mm in width, 1694mm in height, and a wheelbase of 2670mm.
20
5
Share

What to Do When the Engine Catches Fire?

Engine fire solutions are: first, quickly turn off the engine, then aim the fire extinguisher at the fire and spray. Do not fully open the engine hood; instead, open a small gap to use the fire extinguisher to put out the fire. The causes of engine fire are: 1. Poor contact or excessive resistance in the ignition coil corresponding to the relevant cylinder, or a damaged ignition coil; 2. Leakage or open circuit in the cylinder's distributor wire, excessive or insufficient spark plug gap, or carbon deposits between the electrodes. An engine is a machine capable of converting other forms of energy into mechanical energy, applicable both as a power generation device and as the entire machine including the power unit. Its types include internal combustion engines, external combustion engines, gas turbines, and electric motors.
4
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.