How to Manually Reset the Tire Pressure Light on a Jeep Compass?

1 Answers
DelKhloe
07/28/25 4:10pm
After the tire pressure indicator light comes on, you must ensure the vehicle is parked safely by the roadside and check the tire pressure monitoring function on the car's navigation screen for any abnormal wheel conditions. Once an abnormal wheel is identified, you need to inspect the tire pressure of the affected wheel. If the tire pressure is too high and triggers the alarm, adjust the tire pressure to the safe value. The tire pressure warning will then be reset, and the issue will be resolved.
Was this review help?
10
5
Share
More Forum Discussions

What can be used to polish yellowed car lights?

When car lights become yellowed, you can use sandpaper to polish the lights and then apply specialized wax for further polishing. Below is relevant information about car lights: 1. Headlights: The primary purpose of headlights is to illuminate the road and objects ahead, ensuring driving safety. They can also be used to signal overtaking at night by alternating between high and low beams. Headlights are installed on both sides of the front of the car, with 2 or 4 per vehicle. The bulb power ranges from 45~60W for high beams to 25~55W for low beams. 2. Fog lights: Fog lights are installed near or slightly lower than the headlights. They are used in low-visibility conditions such as fog, snow, heavy rain, or dust to illuminate the road and signal to oncoming traffic. The lights are mostly yellow because yellow light has longer wavelengths and better fog-penetrating properties. The bulb power is generally 35W. 3. Reverse lights: Reverse lights are installed at the rear of the car to illuminate the road behind and inform other vehicles and pedestrians that the car is reversing or preparing to reverse. They also function as light signal devices. The lights are white with a power of 28W.
18
2
Share

What is the reason for the Passat's air conditioning not cooling when the throttle is increased?

Passat's air conditioning not cooling when the throttle is increased is due to excessive refrigerant, causing the high pressure to be too high, which triggers the high-pressure protection switch to trip and stops the cooling. Correct usage method of car air conditioning: Generally, the blue button on the left side of the car represents cold air, while the red one represents warm air, and the middle one represents moderate temperature. To turn on the cold air, adjust the left button towards the blue area. When warm air is needed, adjust it towards the red area, then press the AC switch. Additionally, the middle button controls the fan speed, and the one on the far right adjusts the mode—you can set it to blow air only to the feet, hands, or windshield, or use two modes simultaneously. Precautions for using the air conditioning system for cooling: The air conditioning system requires refrigerant to absorb heat for cooling. Prolonged use can lead to minor refrigerant leakage in the system, or damage to the air conditioning system can cause leaks, resulting in insufficient refrigerant. Both scenarios can cause the air conditioning system to stop cooling. In such cases, it is necessary to check for leaks, evacuate the system, and recharge it.
15
5
Share

What is the difference between position lights and daytime running lights?

Position lights and daytime running lights differ in the following aspects: taillights, activation time, operation method, color, bulb type, and location. Details are as follows: Taillights difference: Position lights have both rear taillights and front position lights; daytime running lights do not have rear taillights. Activation time difference: Position lights are generally turned on after dusk, primarily used to indicate the width and height of the vehicle during driving, helping other drivers judge relative positions and vehicle size during overtaking or meeting; daytime running lights are designed to make the vehicle more noticeable during daytime driving, serving as signal lights. Operation method difference: Position lights have a separate switch; daytime running lights automatically turn on at position 0 without a separate switch. Color difference: Typically, position lights are white in the front and red at the rear; daytime running lights emit a whiter light. Bulb difference: Position lights usually use tungsten filament bulbs, while daytime running lights typically use LED bulbs. Location difference: Position lights are distributed at the four corners of the vehicle, both front and rear; daytime running lights are only located at the front.
13
0
Share

What is the fuel tank capacity of the Chery A3 in liters?

Chery A3's fuel tank capacity is 57 liters, as officially announced. The recommended fuel grade for Chery A3 is 92 octane, with a fuel consumption of 6.5-9.2L per 100 kilometers. A full tank can cover a distance of 619-876km. During daily driving, it is necessary to always pay attention to the remaining fuel in the tank. This is usually observed through the fuel gauge inside the car. If there are no other issues, the fuel level will be accurately reflected on the gauge. The fuel gauge typically has 5 to 6 segments. It is advisable to refuel when there are only 2 segments left to avoid running out of fuel midway. During actual refueling, the amount of fuel may exceed the calibrated capacity. This is because the fuel tank capacity specified by the car manufacturer is measured from the bottom of the tank to the safe limit. There is additional space from the safe limit to the tank opening, which is designed to allow for fuel expansion due to temperature increases without causing overflow. If fuel is filled up to the tank opening during refueling, the actual refueling amount may exceed the calibrated tank capacity.
9
1
Share

Is the Geely Xingyue Front-Wheel Drive or Rear-Wheel Drive?

Geely Xingyue is a front-engine, front-wheel-drive model. Introduction to Front-Wheel Drive Vehicles: Lower manufacturing cost, fuel-efficient, and economical for daily use; however, they tend to exhibit understeer, requiring the driver to compensate during turns. The weight distribution is noticeably front-heavy during cornering, making them unsuitable for aggressive handling maneuvers, though they perform adequately for normal driving. Introduction to Rear-Wheel Drive Vehicles: Higher manufacturing cost, but offers more agile handling and greater torque, though prone to oversteer. In extreme cases, counter-steering may be necessary to correct the vehicle's attitude, otherwise, loss of control can occur. Due to the combined considerations of drivetrain layout and cost, rear-wheel drive is typically reserved for SUVs, sports cars, and mid-to-high-end sedans. Their front-rear weight distribution is far more balanced compared to front-wheel-drive vehicles. From a stability perspective, front-wheel drive performs better. The concentration of the drivetrain near the cabin in front-wheel-drive vehicles results in noise from power transmission, compounded by suspension movement frequencies, creating environmental and physical strain on the driver. Consequently, cabin insulation costs are higher. The centralized drivetrain design eliminates the need for a driveshaft and rear differential, reducing overall vehicle cost.
13
5
Share

What does the yellow exclamation mark on the steering wheel mean?

The yellow exclamation mark on the steering wheel indicates that the EPS (Electric Power Steering) is not activated. Generally, this symbol remains visible before the engine is started, during which the steering wheel feels tight. It disappears immediately after the engine starts, and the steering wheel becomes loose, indicating that the electric power steering function is now active. It is normal for the light to turn off after startup. If a red exclamation mark appears on the steering wheel, it means the steering system has completely failed and is no longer functional. Turning the steering wheel requires significant effort, and you should slow down, park the car safely, and seek repairs or assistance as soon as possible. If the electric power steering system warning light comes on while driving and the power steering fails, you should slowly pull over and seek assistance. Although the car can still be driven without electric power steering, it becomes much harder to control, so it is recommended not to continue driving. Scenarios when the electric power steering system warning light comes on: Light stays on continuously: This indicates a complete failure of the electric power steering system, requiring inspection and replacement of faulty components at a repair shop. Light turns on briefly for 5-10 minutes and then turns off: This is caused by overheating of the electric power steering motor. The system enters an overheating protection mode, reducing or pausing motor assistance until the temperature drops, after which normal assistance resumes.
13
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.