How to Manually Reset the Maintenance Reminder Light on the Buick Excelle?
3 Answers
Method to manually reset the maintenance reminder light on the Buick Excelle: 1. Turn off the ignition switch and press the TRIP button; 2. Turn on the ignition switch; 3. Release the TRIP button; 4. When the maintenance reset is prompted, press and hold the ENTER switch for 3 to 5 seconds; 5. After a beep sound, confirm the completion; 6. Turn off the ignition switch. Taking the Buick Excelle 2021 Modified 1.3T Automatic Light Hybrid Base Model as an example, its dimensions are 4609mm in length, 1798mm in width, and 1486mm in height, with a wheelbase of 2640mm, and the body structure is a 4-door 5-seater sedan. In terms of power, the Buick Excelle 2021 Modified 1.3T Automatic Light Hybrid Base Model is equipped with a 1.3L inline 3-cylinder turbocharged engine, with a maximum power of 120kW and a maximum torque of 230Nm, paired with a 6-speed automatic transmission.
I've been driving my Buick Excelle for several years, and the maintenance reminder light is quite annoying, but manually resetting it is simple. First, turn the key to the off position, ensuring nothing is moved; locate the small button on the dashboard, usually the TRIP or INFO button, and hold it down firmly without releasing; then turn the key to the power-on position, but don't start the engine—just wait. Typically, after about ten seconds, the light will flash a few times and go off, at which point you can release the button. If it doesn't work the first time, it might be due to poor button contact—just repeat the process once or twice. This light reminds you to change the oil and inspect the vehicle regularly. After resetting, the system restarts the timer, which doesn't affect normal driving, but make sure to perform the operation in a safe place with the engine off for added safety. Remember to clear it promptly after regular maintenance to avoid the beeping sound.
Hey buddy, that Buick Excelle maintenance reminder light flashing is annoying, right? I had the same issue last time. Here's a super quick manual reset: After turning off the engine, rotate the key to the Lock position; press and hold the RESET button near the steering wheel; turn the key to the ON position without starting the car; be patient and wait for the reminder light to go off by itself; then release the button and you're done! If it doesn't respond, restart the key or try again—it usually works. Don't forget to do this right after maintenance, otherwise the reminder is pointless. This little trick saves time and costs nothing, but don't neglect actual vehicle maintenance—safety first. Always keep an eye on dashboard changes while driving to catch other potential issues.
