How to manually reset the maintenance light on Geely Boyue Pro?

Does the High-Pressure Fuel Pump Need Replacement if It Makes Abnormal Noises?

If the fuel pump produces noises, it needs to be replaced with a new one. Below is relevant information about the fuel pump: 1. The fuel pump is a crucial component in the fuel supply system. Without the fuel pump, the engine's fuel supply would be compromised, affecting its normal operation. 2. The fuel pump is located inside the fuel tank. Some engines equipped with direct injection technology also have a high-pressure fuel pump in the engine compartment. The fuel pump draws gasoline from the fuel tank and supplies it at the required pressure. Most commonly encountered engines use either multi-point injection or direct injection.

6

2

Share

How to Fix Misaligned Rearview Mirror Gears?

Misaligned rearview mirror gears cannot be repaired and require replacement with a new folding gear set at a 4S shop. There are two main adjustment methods for rearview mirrors: 1. Exterior adjustment: This method involves manually adjusting the mirror frame or surface position while the vehicle is parked to achieve the desired viewing angle. 2. Interior adjustment: This allows drivers to adjust the rearview mirror while driving, providing convenient conditions for observing the rear view. The rearview mirror is a tool that enables drivers to directly obtain external information about the rear, side, and lower areas of the vehicle while seated in the driver's seat. It serves to facilitate driver operation, prevent traffic safety accidents, and ensure personal safety.

1

Share

How to Repair Rice Grain-Sized Pits on Windshield?

Windshield rice grain-sized pit repair steps are as follows: 1. Clean glass debris thoroughly: After drilling, remove all glass fragments from the pit as they may affect the repair result. 2. Inject repair fluid into the pit: Use repair tools to inject and pressurize the repair fluid into the pit until it fills completely. 3. Cure the repair fluid: Use a UV lamp to solidify the repair fluid. 4. Remove repair tools: Dismantle the tools and scrape off any residual repair fluid on the surface with a blade to complete the repair. While you can purchase tools to repair windshield rice grain-sized pits yourself, for better results, consider visiting a professional glass repair shop.

1

3

Share

What are the solutions for clutch judder?

Solutions for clutch judder are as follows: 1. Check for operational issues: Determine if there are operational problems. When the clutch is depressed and in a semi-engaged state, if the car's idle speed is unstable or the coordination between the accelerator pedal and the clutch is improper, it can cause engine judder. 2. Verify if the clutch disc was recently replaced: If the clutch disc was just replaced, this situation may occur. After the clutch disc, pressure plate, and flywheel have worn in for a period of time, it will return to normal. 3. Assess the car's performance: Some cars have unique performance characteristics, with clutch travel gaps that are either too small or too large. If not mastered skillfully, it may lead to clutch judder.

5

0

Share

What to Do When the Car Handbrake Fails to Hold?

Solutions for a car handbrake that fails to hold are as follows: 1. Find a flat surface: First, locate a level area. If the ground is uneven, use wheel chocks to prevent the vehicle from rolling. 2. Open the handbrake cover plate. 3. Loosen the handbrake adjustment screw: Loosen the handbrake adjustment screw until it is approximately 4-5 mm from the top. 4. Apply the handbrake firmly while pressing the brake pedal: Start the vehicle, then firmly pull the handbrake while pressing the brake pedal about 10 times until you feel resistance. 5. Adjust the screw: Tighten the handbrake adjustment screw by approximately 1.5 turns. 6. Release the handbrake: Release the handbrake—it should stop after about 4 clicks and become immovable after 7 clicks. If the desired effect is not achieved, simply adjust the screw. If the issue persists, it is recommended to inspect the front and rear handbrake cables.

20

4

Share

Why is there a hissing sound when turning on the AC in a car?

A hissing sound indicates insufficient refrigerant. Here are the proper methods for using car air conditioning: Choose an appropriate temperature setting: In summer, many people prefer setting the temperature extremely low. However, excessively low temperatures can affect health, so it's essential to set a suitable temperature. The optimal temperature range for human comfort is 20°C to 25°C. Above 28°C, people feel stuffy, while below 14°C feels too cold. Therefore, maintain the cabin temperature between 18°C and 25°C - excessively low temperatures may cause illness. Avoid immediately activating recirculation mode in summer: When a car has been parked under intense sunlight, some drivers tend to turn on both the AC and recirculation mode immediately, thinking this will cool the cabin faster. However, since interior temperatures are higher than outside, this approach is ineffective. Upon entering the vehicle, first open windows for ventilation and use fresh air mode to expel hot air. Only switch to recirculation mode after the cabin temperature has decreased.

10

0

Share

How to manually reset the maintenance light on Geely Boyue Pro?

Does the High-Pressure Fuel Pump Need Replacement if It Makes Abnormal Noises?

How to Fix Misaligned Rearview Mirror Gears?

How to Repair Rice Grain-Sized Pits on Windshield?

What are the solutions for clutch judder?

What to Do When the Car Handbrake Fails to Hold?

Why is there a hissing sound when turning on the AC in a car?

Is Audi's fuel consumption high?

Why does the brake make a creaking sound on snowy days?

What brand is the engine of the Changan CS55plus?

What is the keyout indicator light?