How to manually reset the maintenance light on a 2020 CR-V?
5 Answers
Locate and hold down the "A" button while simultaneously pressing the brake pedal with your foot. Do not start the engine, but ensure the vehicle's power is turned on. At this point, the dashboard characters will flash. Continue holding the "A" button until "..." appears on the dashboard. Release the brake pedal and the "A" button. The maintenance light reset process is now complete. Turn off the power.
I've been driving for over 20 years, and resetting the maintenance light is a piece of cake for me. On the 2020 CRV, it's quite simple: get in the car, turn the key to the power-on position but don't start the engine; then press and hold the TRIP button on the left side of the steering wheel for a few seconds, and a menu will pop up on the dashboard; next, use the navigation button to find the maintenance reset option, enter it to confirm the reset, and the light will go off. If the light remains on, it might be that the system isn't responding—don't force it, just take it to the dealership for a check. The maintenance light is actually a friendly little reminder to change the oil or get a check-up regularly. Don't delay when the maintenance interval comes up; taking care of your car can extend its life. Make it a habit to take a quick look at the dashboard before driving—it's safe and worry-free. Remember, any operation should be done when the car is parked to avoid distractions while driving.
Hey buddy, I also often see the maintenance light on my CRV bought last year! The reset steps aren't complicated: turn the key to ON position without starting the engine, use the steering wheel control buttons; press a few times to switch to the settings menu, find the maintenance option, and confirm the reset. I messed up the button sequence the first time I tried, but got the hang of it later. If you can't figure it out, don't panic - just get it done at a repair shop. This light is just a mileage timer, it must be reset after maintenance to start counting again, otherwise it'll stay annoyingly lit but won't affect driving. I recommend checking the dashboard monthly - keep your car in good condition for longer trips, safety first and don't overlook small details.
As a regular family car owner, I have reset the maintenance light. For the 2020 CRV, the manual reset is simple: turn the power ON with the engine off, use the steering wheel buttons to open the menu, select maintenance reset, and confirm. If the light goes off, it means the reset was successful. If the light remains on, it could indicate a system fault or incomplete maintenance—for safety, it's best to have it checked at a professional shop. The maintenance light reminds us to perform regular maintenance, such as oil changes, to extend the vehicle's lifespan. When performing the reset yourself, ensure the doors are closed and stay focused to avoid distractions. This operation is easy to master.
I have some knowledge about automotive electronics. The 2020 CRV maintenance light reset is based on the system menu: park the engine OFF, turn the key ON, use the steering wheel controls to enter the maintenance settings, select reset and confirm. Different models have different methods, for example, Honda uses the TRIP button while Toyota uses the ODO button. After resetting, the sensor resets to record the new mileage. The light on means maintenance reminders such as expired engine oil; regular maintenance protects the engine for efficient operation and smoother driving. The operation is safe without risks, but if the dashboard does not respond, diagnostic codes are needed.
