How to manually reset the maintenance light on a 2019 Sagitar?

[LaNatalie]

Open the driver's door of the vehicle. Press and hold the 0.0 button on the instrument panel. Turn the ignition key to power on the vehicle. The instrument panel will light up. Release the button and then quickly press it three times to complete the reset.

[McKevin]

For the 2019 Sagitar maintenance light manual reset, I'll share the detailed steps. Park the car and turn off the ignition, then remove the key. Press and hold the reset button on the instrument cluster—usually the small button marked 0.0 or SET. Without releasing the button, insert the key and turn it to the ON position, but do not start the engine. Continue holding the button for about ten seconds until the wrench icon on the instrument cluster disappears or the screen displays that the maintenance mileage has been reset. Then release the button and finally turn off the ignition and remove the key. I often use this method because it saves the cost and time of going to the 4S shop. The maintenance light is part of the car's reminder system; after manually resetting it, it starts counting the next maintenance mileage again. If not reset in time, the light will stay on, obstructing your view and potentially misleading the maintenance schedule. I recommend performing this simple and practical operation after each maintenance.

[StJack]

Resetting the maintenance light on a 2019 Sagitar is quite simple. Turn off the car and remove the key, then press and hold the reset button on the dashboard. Turn the key to the accessory position without starting the engine, and keep holding the button until the maintenance light goes off. Release the button, turn off the key, and you're done. I've done this several times—it's convenient and saves money. The maintenance light is actually used to calculate the next service interval; resetting it starts the timer anew. If you don't reset it, the light stays on, which can be distracting and might cause you to miss the proper maintenance schedule. There's minimal risk in doing it yourself, but make sure the car is completely stationary and avoid accidentally pressing other buttons. Remembering these basic maintenance tips can help extend your car's lifespan.

[DiAnna]

Manually resetting the maintenance light on a 19 Sagitar: Turn off the ignition, press and hold the reset button on the instrument panel, turn the key to ON without starting the engine, continue holding until the light goes off, then release and turn off the key. This method is free and quick, and I've tried it—it works. Resetting the maintenance light allows it to recalculate mileage for the next service reminder. If left unaddressed, the light stays on and can be annoying. It's advisable to learn some basic car maintenance knowledge.