How to manually reset the maintenance light on a 2018 Sagitar?

1 Answers
DeElaina
07/29/25 11:03pm
The method to manually reset the maintenance light on a 2018 Sagitar is: 1. Press the maintenance button while turning on the ignition; 2. After hearing a beep, release the maintenance button and hold for two seconds; 3. Keep the ignition switch unchanged, then press and hold the button next to the instrument panel. Taking the Sagitar 2020 200TSI Manual Fashion model as an example, its dimensions are 4753mm in length, 1800mm in width, and 1462mm in height, with a wheelbase of 2731mm and a fuel tank capacity of 50 liters. The front suspension of this car is a MacPherson independent suspension, and the rear suspension is a multi-link independent suspension. It is equipped with a 1.2L turbocharged engine, delivering a maximum horsepower of 116PS, a maximum power of 85kW, and a maximum torque of 175Nm, paired with a 5-speed manual transmission.
Was this review help?
6
4
Share
More Forum Discussions

Which city does the Su F license plate belong to?

Su F license plate belongs to Nantong City, Jiangsu Province. The license plate codes for various regions in Jiangsu Province are as follows: Su A is Nanjing, Su B is Wuxi, Su C is Xuzhou, Su D is Changzhou, Su E is Suzhou, Su F is Nantong, Su G is Lianyungang, Su H is Huaian, Su J is Yancheng, Su K is Yangzhou, Su L is Zhenjiang, Su M is Taizhou, Su N is Suqian. License plates are used for numbering and information registration of vehicles. Their main function is to identify the region to which the vehicle belongs through the license plate, and also to find the owner of the vehicle and its registration information based on the license plate. The license plate number is the identification plate of the vehicle. The significance of the license plate number to the vehicle is like the ID number to a person. For example, a vehicle with a Su F license plate is from Nantong City, Jiangsu Province, where Su represents Jiangsu Province, and F represents Nantong City. Su F is the license plate code for Nantong City.
9
2
Share

What to Do If You Lose Your Car Key?

If you lose your car key, you can contact the manufacturer's after-sales service. As long as you confirm that you are the car owner or have obtained authorization from the car owner, the manufacturer will arrange for the nearest 4S store to provide paid assistance. The 4S store will tow the car back to the shop, and after verifying your identity again, they will configure a new key. Once the new key is successfully matched, the previously lost smart remote key will become invalid. If the car key was stolen, it is recommended to replace the entire car lock. This is because the old key becoming invalid only means it cannot start the vehicle. Since the car door uses a mechanical lock, the old key can still open the door, so replacing the entire car lock eliminates security risks. In daily use, avoid subjecting the car key to severe impacts, exposure to liquids, and strong magnetic fields.
19
3
Share

What are the annual inspection requirements for vehicles over 6 years old?

The annual inspection requirements for vehicles over 6 years old are as follows: Small and micro non-operational passenger vehicles must undergo inspection once every 2 years within the first 6 years; for vehicles over 6 years old, inspection is required once every year; for vehicles over 15 years old, inspection is required once every 6 months. Vehicle annual inspection refers to a mandatory test for every vehicle that has obtained an official license plate and registration certificate, equivalent to an annual health check for the vehicle based on the safety technical conditions for motor vehicle operation. Annual inspections can promptly eliminate potential safety hazards, encourage better vehicle maintenance, and reduce the occurrence of traffic accidents. Vehicles can undergo inspection and apply for annual review within 3 months before the annual review date. It is advisable to do so two months or more than one month in advance, as the workload at inspection stations is relatively lighter before the 10th of each month, presenting a good opportunity to avoid queues for the inspection.
2
0
Share

Which Air Circulation Mode to Use for Defogging Inside the Car?

When defogging inside the car, use the external air circulation mode to introduce outside air into the car, which helps remove fog faster. Turn on the car's air conditioning cooling function along with external circulation, and set the fan to maximum speed. This can typically clear the fog on the windshield in just over ten seconds. To completely eliminate fog inside the car, use warm air to blow the windshield. Start with external circulation, select the warm air mode and direct the airflow to the front windshield vents. Wait for about five minutes, then switch to internal circulation or turn it off directly. Using warm air for defogging in winter is more comfortable, but it takes longer to remove fog compared to using cold air.
2
2
Share

Why Won't My Car Start?

Reasons why a car won't start: 1. Low fuel level or fuel gauge showing below the red line; 2. Malfunction of sensors shared by the ignition system and fuel injection system; 3. Burned-out power supply wires from the battery or damaged starter relay; 4. Excessive carbon buildup causing poor valve sealing, engine misfire, or weak acceleration. Correct steps to start a car: 1. Insert the car key into the ignition switch and turn it one notch upward, pause briefly to allow the fuel pump to activate and for the fuel supply and electrical systems to self-check; 2. Ensure the gearshift is in the neutral position and depress the clutch pedal; 3. Turn the key upward until you hear the engine start, then release the key; 4. Once the dashboard lights up, gently release the clutch pedal with your left foot while moderately pressing the accelerator pedal to ensure a smooth start.
17
5
Share

What Does Tire Pressure System Malfunction Mean?

Tire pressure system malfunction may indicate a failure in the tire pressure monitoring system or an abnormality in one of the car's wheels. It is recommended to stop and inspect immediately. The tire pressure monitoring system monitors the tire pressure of all four wheels. If the tire pressure system malfunctions, it is usually due to low tire pressure in one of the wheels. It is important to ensure that the tire pressure information sensor is not damaged during maintenance, such as when patching or replacing tires. The tire pressure monitoring system can automatically monitor tire conditions by recording tire rotation speed or through electronic sensors installed in the tires, effectively ensuring driving safety. There are two types of tire pressure monitoring systems: indirect and direct. The indirect system detects abnormalities by monitoring differences in tire rotation speed, while the direct system uses four tire pressure sensors installed inside the tires to monitor pressure in real-time, ensuring safety while driving.
18
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.