How to manually reset the maintenance light on a 2011 Lavida?

1 Answers
ONova
07/25/25 1:06am
Remove the car key to ensure all dashboard lights are off, then press and hold the small button on the right side of the dashboard. Insert the car key and turn on the vehicle's power. After holding for 3 seconds, you will hear a beep. Then press the button on the left side of the dashboard. Turn off the vehicle's power again and restart it. The maintenance light will disappear.
Was this review help?
14
5
Share
More Forum Discussions

Can one license plate number be used for multiple vehicles?

A vehicle license plate can only be used on one vehicle. Methods for replacing a vehicle license plate: To replace a motor vehicle license plate, you need to go to the vehicle management office or the traffic management department of the public security authority. Regardless of the method used for replacement, the motor vehicle license plate can be effectively replaced. Once the replacement is completed, it can be used normally; otherwise, it will be considered illegal. Functions of a vehicle license plate: The license plate serves as a numbering and information registration for each vehicle. Its main purpose is to identify the region to which the vehicle belongs and to trace the vehicle's owner and registration information based on the license plate.
20
5
Share

How to Turn Off the One-Button Start-Stop Feature in the Buick Excelle?

The method to turn off the one-button start-stop feature in the Buick Excelle is: The start-stop function switch is located next to the ignition switch or on the center console panel. After the engine starts, the automatic start-stop system will activate, and you can manually deactivate it by pressing the button. The engine automatic start-stop system automatically shuts off the engine when the vehicle comes to a temporary stop during driving. When it's time to move forward again, the system automatically restarts the engine. The Buick Excelle is a compact sedan with dimensions of 4609mm in length, 1798mm in width, and 1464mm in height, a wheelbase of 2640mm, and is equipped with a 6-speed automatic manual transmission.
20
3
Share

What documents are required for Subject 2 driving test?

Bring your second-generation ID card and the Subject 2 admission ticket, which is usually distributed to candidates by the driving school staff accompanying the test on the exam day. C1 Subject 2 test precautions: It's best to control the vehicle speed at about 5 km/h through clutch pedal control; observe ground markings and determine vehicle position through rearview mirrors, including proper mirror adjustment and viewing angles, as well as the timing and degree of steering wheel rotation. C1 Subject 2 test details:
13
4
Share

What are the reasons for a motorcycle suddenly failing to start?

Motorcycle suddenly failing to start may be due to the spark plug electrode gap being too large or too small, affecting the spark intensity. Motorcycle riding tips: Before riding, check the condition of the motorcycle, including the headlights, turn signals, horn, handlebars, etc. Helmets are legally required protective gear, choose brightly colored clothing, and strictly avoid drunk driving and unlicensed driving. Driving precautions: Drive on the right side and avoid sidewalks. Do not follow too closely; maintain an appropriate distance behind the right rear corner of the vehicle in front. When overtaking, pass from the left side of the vehicle ahead; avoid overtaking on the right or between two parallel vehicles.
3
0
Share

Is There Windshield Washer Fluid in a New Car?

New cars come with a small amount of windshield washer fluid, but not much. Introduction to Windshield Washer Fluid: Commonly known as automotive windshield cleaning fluid, it is a consumable item in vehicle use. High-quality windshield washer fluid is mainly composed of water, alcohol, ethylene glycol, corrosion inhibitors, and various surfactants. Functions of Windshield Washer Fluid: It has cleaning properties, as the fluid is formulated with multiple surfactants and additives. Windshield washer fluid typically functions to wet, penetrate, and solubilize, thereby effectively cleaning and removing dirt. It also has antifreeze properties; the presence of alcohol and ethylene glycol significantly lowers the freezing point of the liquid, providing antifreeze benefits and quickly dissolving frost.
16
3
Share

What type of fire extinguisher should be kept in a car?

Dry powder fire extinguishers or water-based fire extinguishers should be kept in a car. Vehicle fire extinguishers are generally placed in the trunk of the vehicle and secured with a mesh pocket. If there is no mesh pocket in the trunk, you can also purchase Velcro or mounting brackets online to secure the vehicle fire extinguisher. Fire extinguishers are stored in public places or areas where fires may occur, and are divided into different types such as portable and cart-type. Different types of fire extinguishers contain different components, designed specifically for different causes of fires, including foam, dry powder, halon, etc. Precautions for using fire extinguishers include: 1. During transportation and storage, fire extinguishers should avoid being placed upside down, exposed to rain, sunlight, strong radiation, or contact with corrosive substances; 2. Fire extinguishers should be inspected regularly according to the manufacturer's requirements and inspection cycle.
14
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.